Skip to content

agg23/SwiftNES

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SwiftNES

SwiftNES - The Accurate Swift NES Emulator

SwiftNES is a NES emulator aiming to be one of the most accurate in existence, using Apple's latest technologies Swift and Metal. SwiftNES uses all original code, as I wanted to write the emulator from scratch. As such, certain design decisions were made that I now know were not optimal. All NES hardware operations are emulated on a cycle-by-cycle basis. While this makes the emulator considerably more resource hungry, it ensures absolute accuracy to the hardware, bugs and all.

Donkey Kong Duck Hunt Super Mario Bros. Excitebike

Features

  • Full cycle accurate 6502 emulator, including cycle accurate timing on all illegal opcodes, minus decimal mode emulation (which is not used by the NES)
  • Cycle accurate 2C02 PPU emulation, with in-progress open bus handling
  • Work-in-progress 2A03 APU (slight bugs in sound reproduction)
  • A whole host of mappers (with more coming soon)
  • Retina Mac display support, along with display resizing using pixel doubling

Supported Mappers

Currently SwiftNES can run approximately 88% of the NTSC NES ROMs, thanks to the currently implemented mappers.

  • Mapper 0 (NROM) - Super Mario Bros., Donkey Kong, Excitebike
  • Mapper 1 (MMC1) - Zelda 2, Rad Racer, Lemmings
  • Mapper 2 (UxROM) - Mega Man, Castlevania, Contra
  • Mapper 3 (CNROM) - Arkanoid, Q-bert
  • Mapper 4 (MMC3) - Super Mario Bros. 2 and 3 - May have slight IRQ timing issues
  • Mapper 7 (AxROM) - Marble Madness - May have issues
  • Mapper 9 (MMC2) - Only used in Mike Tyson's Punch Out!!

Accuracy

The final goal behind SwiftNES is to make it one of the most accurate NES emulators in existence. This has caused the design to move away from efficiency and towards hardware accuracy. In order to keep the system simple, the various components making up the NES (the CPU, PPU, and APU) are emulated on a cycle-by-cycle basis, using the CPU clock cycle as the base tick. This has the added bonus of increasing the similarity to the inner workings of the NES.

In order to verify the accuracy of each SwiftNES build, the project includes a unit testing system using XCTest that automatically tests SwiftNES against verified NES test ROMs (see this collection). Although some of the ROMs in the above repo are not actively being tested, the emulator passes 66 of the 78 automated tests, with this number rising every day.

Challenges

SwiftNES has faced several challenges throughout development, mainly due to poor documentation. The PPU has presented innumerable problems, mainly due to its relative complexity to the rest of the NES, and the inability to properly test every feature due to its visual nature. The smallest tweaks in the PPU can have very large results, especially with NMI (Vblank) timing. At some point, the CPU was transitioned to using read and write cycles to time instructions, as opposed to using a lookup table to obtain the cycle length of an opcode. This both decreased CPU usage dramatically and significantly increased the accuracy of the emulator.

Currently, I am struggling to debug various sound issues without a real indication of whether the issues are occurring. Additionally, I recently discovered several bugs with how CPU interrupts were handled, and therefore the interrupt system is currently undergoing a rewrite.

Todo

  • Ensure the CPU properly times all interrupt edge cases correctly, such as NMIs during a BRK, etc...
  • Clean up PPU open bus, ensuring reads of the PPU registers properly returns data off of the bus
  • Fix slight sound reproduction issues
  • Add additional mappers
  • Add support for savestates
  • Add support for saving battery backed RAM

About

A Simple NES Emulator Written in Swift

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages