QingPing sensors sold by RAKwireless

vendor/rakwireless/decoder-qingping.js

@@ -0,0 +1,62 @@
+function Decoder(bytes, port) {
+
+	var i = 0;
+    var output = {};
+    var device_address = data[i++];
+    var function_code = data[i++];
+	var data_length = data[i++];
+    var data_type = data[i++];
+
+	// Parsing only real time data from sensor   
+	if ((0x41 == function_code) && (0x01 == data_type)) {
+
+      	// id
+		output.device = device_address;
+
+        // timestamp
+        output.timestamp = (data[i] << 24) + (data[i+1] << 16) + (data[i+2] << 8) + data[i+3];
+        i+=4;
+
+        // temperature
+        output.temperature = ((data[i] * 16) + (data[i+1] >> 4) - 500) / 10.0;
+        output.humidity = (256 * (data[i+1] & 0x0F) + data[i+2]) / 10.0;
+		output.co2 = (data[i+3] << 8) + data[i+4];
+        i+=5;
+
+        // battery
+        output.battery = data[i];
+
+	}
+
+  	return output;
+
+}
+
+function bytesToHex(bytes) {
+
+	var hexArray = [];
+  	for (var i = 0; i < bytes.length; i++) {
+	    var hex = (bytes[i] & 0xff).toString(16).toUpperCase();
+    	if (hex.length === 1) {
+      		hex = '0' + hex;
+    	}
+    	hexArray.push(hex);
+  	}
+  	return hexArray.join('');
+
+}
+
+function decodeUplink(input) {
+
+	bytes = input.bytes;
+	fPort = input.fPort;
+
+	return {
+		data: Decoder(bytes, fPort),
+		warnings: [],
+		errors: []
+	};
+
+}
+
+

vendor/rakwireless/index.yaml

@@ -6,3 +6,5 @@ endDevices:
   - wisblock-kit4
   - rak2270
   - rak2560
+  - qingping-t-h
+  - qingping-co2-t-h

vendor/rakwireless/qingping-co2-t-h-868-profile.yaml

@@ -0,0 +1,48 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 16
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/rakwireless/qingping-co2-t-h-915-profile.yaml

@@ -0,0 +1,48 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 22
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/rakwireless/qingping-co2-t-h-codec.yaml

@@ -0,0 +1,2 @@
+uplinkDecoder:
+  fileName: decoder-qingping.js

vendor/rakwireless/qingping-co2-t-h.yaml

@@ -0,0 +1,74 @@
+name: QingPing CO2 & Temperature & Humidity Monitor for LoRaWAN
+description: The QingPing LoRaWAN CO2 monitor Sensor is a remote monitoring device that uses nondispersive infrared (NDIR) spectral analysis to accurately measure CO2 levels. Aside from CO2 levels, it also monitors temperature and relative humidity, providing a comprehensive overview of the indoor environment in real time.
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.3.4'
+    numeric: 1
+    # Corresponding hardware versions (optional)
+    hardwareVersions:
+      - '1.0'
+
+    # LoRaWAN Device Profiles per region
+    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870
+    profiles:
+      EU863-870:
+        id: qingping-co2-t-h-868-profile
+        lorawanCertified: false
+        codec: qingping-co2-t-h-codec
+      US902-928:
+        id: qingping-co2-t-h-915-profile
+        lorawanCertified: false
+        codec: qingping-co2-t-h-codec
+
+sensors:
+  - temperature
+  - humidity
+  - co2
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 77
+  length: 77
+  height: 28
+
+# Weight in grams (optional)
+#weight: 10
+
+operatingConditions:
+  temperature:
+    min: -10
+    max: 50
+
+# Valid values are: none, read protected and secure element.
+keySecurity: none
+
+# Product and data sheet URLs (optional)
+productURL: https://store.rakwireless.com/products/qingping-lorawan-co2-monitoring-sensor
+dataSheetURL: https://downloads.rakwireless.com/IoT-Marketplace/Qingping/Indoor%20CO2%20Monitoring%20Solution/QingPing%20LoRaWAN%20CO2%20Sensor%20Datasheet.pdf
+
+# Photos
+photos:
+  main: qingping-co2-t-h.png
+#videos:
+#  main: https://www.youtube.com/watch?v=XVRR7Akyy8M
+
+# Regulatory compliances (optional)
+#compliances:
+#  emc:
+#    - body: ETSI
+#      norm: EN
+#      standard: 301 489-1
+#      version: 2.2.3
+#  radio:
+#    - body: ETSI
+#      norm: EN
+#      standard: 300 220-2
+#      version: 3.2.1

vendor/rakwireless/qingping-t-h-868-profile.yaml

@@ -0,0 +1,48 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 16
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/rakwireless/qingping-t-h-915-profile.yaml

@@ -0,0 +1,48 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 22
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/rakwireless/qingping-t-h-codec.yaml

@@ -0,0 +1,2 @@
+uplinkDecoder:
+  fileName: decoder-qingping.js