Merge pull request verilog-to-routing#2472 from verilog-to-routing/fi…

…x_3d_arch Fix: Address warnings in Koios 3D architectures and add additional test
SymbiFlow · Jan 19, 2024 · 4f08d52 · 4f08d52
2 parents 69f9ebe + 1c659ce
commit 4f08d52
Show file tree

Hide file tree

Showing 8 changed files with 107 additions and 62 deletions.
diff --git a/vtr_flow/arch/multi_die/README.md b/vtr_flow/arch/multi_die/README.md
@@ -6,6 +6,7 @@ This directory contains architecture files for 3D FPGAs. The architectures are d
 - Contains architecture files based on the [k6FracN10LB_mem20K_complexDSP_customSB_22nm](../COFFE_22nm/k6FracN10LB_mem20K_complexDSP_customSB_22nm.clustered.xml) architecture, utilized in Koios benchmarks.
 - Inside the architecture file, the fabric with multiple sizes based on the sector size is defined.
 - Routing resource and switch delays in this architecture are configured for 7 nm technology. The inter-die connection delay is 73 ps.
+- The empty blocks in the middle of the fabric at the base die, which have the chess pattern, represent the through-silicon via (TSV) holes used to deliver power and ground to the upper die.
 - Detailed information on how these delays are obtained can be found in the paper "Into the Third Dimension: Architecture Exploration Tools for 3D Reconfigurable Acceleration Devices," presented at FPT '23.
 - **Architectures:**
    - `3d_full_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml`

diff --git a/.../multi_die/koios_3d/3d_full_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml b/.../multi_die/koios_3d/3d_full_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml
@@ -221,16 +221,6 @@
         </pinlocations>
       </sub_tile>
     </tile>
-    <tile name="tsv_hole" height="2" width="2" area="137668">
-      <sub_tile name="tsv_hole">
-        <equivalent_sites>
-          <site pb_type="tsv_hole"/>
-        </equivalent_sites>
-        <input name="in" num_pins="1"/>
-        <output name="out" num_pins="1"/>
-        <fc in_type="abs" in_val="0" out_type="abs" out_val="0"/>
-      </sub_tile>
-    </tile>
   </tiles>
   <!-- ODIN II specific config ends -->
   <layout>
@@ -251,10 +241,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -290,10 +280,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -328,10 +318,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -366,10 +356,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -404,10 +394,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -442,10 +432,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -480,10 +470,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -1552,12 +1542,6 @@
     </pb_type>
     <!-- Define fracturable memory end -->
 
-    <pb_type name="tsv_hole">
-      <input name="I" num_pins="1"/>
-      <output name="O" num_pins="1"/>
-      <interconnect/>
-    </pb_type>
-
   </complexblocklist>
 
   <switchblocklist>

diff --git a/...lti_die/koios_3d/3d_limited_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml b/...lti_die/koios_3d/3d_limited_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml
@@ -212,16 +212,6 @@
         </pinlocations>
       </sub_tile>
     </tile>
-    <tile name="tsv_hole" height="2" width="2" area="137668">
-      <sub_tile name="tsv_hole">
-        <equivalent_sites>
-          <site pb_type="tsv_hole"/>
-        </equivalent_sites>
-        <input name="in" num_pins="1"/>
-        <output name="out" num_pins="1"/>
-        <fc in_type="abs" in_val="0" out_type="abs" out_val="0"/>
-      </sub_tile>
-    </tile>
   </tiles>
   <!-- ODIN II specific config ends -->
   <layout>
@@ -242,10 +232,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -280,10 +270,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -318,10 +308,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -356,10 +346,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -394,10 +384,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -432,10 +422,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -470,10 +460,10 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
         <!-- PW -->
-        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
 
         <!-- GND -->
-        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+        <col type="EMPTY" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
 
       </layer>
       <layer die="1">
@@ -1533,13 +1523,6 @@
       </mode>
     </pb_type>
     <!-- Define fracturable memory end -->
-
-    <pb_type name="tsv_hole">
-      <input name="I" num_pins="1"/>
-      <output name="O" num_pins="1"/>
-      <interconnect/>
-    </pb_type>
-
   </complexblocklist>
 
   <switchblocklist>

diff --git a/...ly_test7/3d_titan_other/config/config.txt → ...other_full_opin_auto_bb/config/config.txt b/...ly_test7/3d_titan_other/config/config.txt → ...other_full_opin_auto_bb/config/config.txt
diff --git a/.../3d_titan_other/config/golden_results.txt → ...ll_opin_auto_bb/config/golden_results.txt b/.../3d_titan_other/config/golden_results.txt → ...ll_opin_auto_bb/config/golden_results.txt
diff --git a/...regression_tests/vtr_reg_nightly_test7/3d_titan_other_full_opin_cube_bb/config/config.txt b/...regression_tests/vtr_reg_nightly_test7/3d_titan_other_full_opin_cube_bb/config/config.txt
@@ -0,0 +1,52 @@
+#
+############################################
+# Configuration file for running experiments
+##############################################
+
+# Path to directory of circuits to use
+circuits_dir=benchmarks/titan_blif/other_benchmarks/stratixiv
+
+# Path to directory of SDC files
+sdc_dir=benchmarks/titan_blif/other_benchmarks/stratixiv
+
+# Path to directory of architectures to use
+archs_dir=arch/multi_die/stratixiv_3d
+
+# Add circuits to list to sweep
+circuit_list_add=carpat_stratixiv_arch_timing.blif
+circuit_list_add=CH_DFSIN_stratixiv_arch_timing.blif
+circuit_list_add=CHERI_stratixiv_arch_timing.blif
+circuit_list_add=EKF-SLAM_Jacobians_stratixiv_arch_timing.blif
+circuit_list_add=fir_cascade_stratixiv_arch_timing.blif
+circuit_list_add=jacobi_stratixiv_arch_timing.blif
+circuit_list_add=JPEG_stratixiv_arch_timing.blif
+circuit_list_add=leon2_stratixiv_arch_timing.blif
+circuit_list_add=leon3mp_stratixiv_arch_timing.blif
+circuit_list_add=MCML_stratixiv_arch_timing.blif
+circuit_list_add=MMM_stratixiv_arch_timing.blif
+circuit_list_add=radar20_stratixiv_arch_timing.blif
+circuit_list_add=random_stratixiv_arch_timing.blif
+circuit_list_add=Reed_Solomon_stratixiv_arch_timing.blif
+circuit_list_add=smithwaterman_stratixiv_arch_timing.blif
+circuit_list_add=stap_steering_stratixiv_arch_timing.blif
+circuit_list_add=sudoku_check_stratixiv_arch_timing.blif
+circuit_list_add=SURF_desc_stratixiv_arch_timing.blif
+circuit_list_add=ucsb_152_tap_fir_stratixiv_arch_timing.blif
+circuit_list_add=uoft_raytracer_stratixiv_arch_timing.blif
+circuit_list_add=wb_conmax_stratixiv_arch_timing.blif
+circuit_list_add=picosoc_stratixiv_arch_timing.blif
+circuit_list_add=murax_stratixiv_arch_timing.blif
+
+# Add architectures to list to sweep
+arch_list_add=3d_full_OPIN_inter_die_stratixiv_arch.timing.xml
+
+# Parse info and how to parse
+parse_file=vpr_titan.txt
+
+# How to parse QoR info
+qor_parse_file=qor_vpr_titan.txt
+
+# Pass requirements
+pass_requirements_file=pass_requirements_vpr_titan.txt
+
+script_params=-starting_stage vpr --route_chan_width 300 --max_router_iterations 400 --router_lookahead map --place_bounding_box_mode cube_bb