This is a project using the PSoC 6 to create a game on the TFT-shield.
The game consists of different levels. You have to complete a course with the joystick. If you touch the red line you go back to level 1. If you touch the green line you go to the next level.
- The function
GUI_DrawArc()from the GUI.h library does not allow to draw an arc if the starting grade is greater than the ending grade. - ADC using HAL only works on the pre definded analog pins.
- When configure ADC in PDL you canot use
cy8ckit_028_tft_init (NULL, NULL, NULL, NULL);anymore. Instead you can use the struct below and the fucntionmtb_st7789v_init8(&tft_pins);. This function only initializes the pins to control the display. The light sensor, motion sensor, audio, ... can not be used with this function.
const mtb_st7789v_pins_t tft_pins =
{
.db08 = CY8CKIT_028_TFT_PIN_DISPLAY_DB8,
.db09 = CY8CKIT_028_TFT_PIN_DISPLAY_DB9,
.db10 = CY8CKIT_028_TFT_PIN_DISPLAY_DB10,
.db11 = CY8CKIT_028_TFT_PIN_DISPLAY_DB11,
.db12 = CY8CKIT_028_TFT_PIN_DISPLAY_DB12,
.db13 = CY8CKIT_028_TFT_PIN_DISPLAY_DB13,
.db14 = CY8CKIT_028_TFT_PIN_DISPLAY_DB14,
.db15 = CY8CKIT_028_TFT_PIN_DISPLAY_DB15,
.nrd = CY8CKIT_028_TFT_PIN_DISPLAY_NRD,
.nwr = CY8CKIT_028_TFT_PIN_DISPLAY_NWR,
.dc = CY8CKIT_028_TFT_PIN_DISPLAY_DC,
.rst = CY8CKIT_028_TFT_PIN_DISPLAY_RST
};