Merge branch 'bugfix-2.1.x' into pr/26088

Marlin/Configuration.h

@@ -412,11 +412,12 @@
 
   //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
-    #define AUTO_POWER_E_FANS
-    #define AUTO_POWER_CONTROLLERFAN
-    #define AUTO_POWER_CHAMBER_FAN
-    #define AUTO_POWER_COOLER_FAN
+    #define AUTO_POWER_FANS           // Turn on PSU for fans
+    #define AUTO_POWER_E_FANS         // Turn on PSU for E Fans
+    #define AUTO_POWER_CONTROLLERFAN  // Turn on PSU for Controller Fan
+    #define AUTO_POWER_CHAMBER_FAN    // Turn on PSU for Chamber Fan
+    #define AUTO_POWER_COOLER_FAN     // Turn on PSU for Cooler Fan
+    #define AUTO_POWER_SPINDLE_LASER  // Turn on PSU for Spindle/Laser
     #define POWER_TIMEOUT              30 // (s) Turn off power if the machine is idle for this duration
     //#define POWER_OFF_DELAY          60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
   #endif
@@ -1513,7 +1514,7 @@
  *
  * Tune and Adjust
  * -  Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
- * -  PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.
+ * -  PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset.
  *
  * Assuming the typical work area orientation:
  *  - Probe to RIGHT of the Nozzle has a Positive X offset
@@ -1751,6 +1752,21 @@
 //#define V_HOME_DIR -1
 //#define W_HOME_DIR -1
 
+/**
+ * Safety Stops
+ * If an axis has endstops on both ends the one specified above is used for
+ * homing, while the other can be used for things like SD_ABORT_ON_ENDSTOP_HIT.
+ */
+//#define X_SAFETY_STOP
+//#define Y_SAFETY_STOP
+//#define Z_SAFETY_STOP
+//#define I_SAFETY_STOP
+//#define J_SAFETY_STOP
+//#define K_SAFETY_STOP
+//#define U_SAFETY_STOP
+//#define V_SAFETY_STOP
+//#define W_SAFETY_STOP
+
 // @section geometry
 
 // The size of the printable area
@@ -3108,7 +3124,7 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
- * E3S1PRO (T5UID1)
+ * E3S1PRO (T5L)
  *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
@@ -3313,6 +3329,8 @@
   #define TFT_THEME BLACK_MARLIN
 
   //#define TFT_SHARED_IO   // I/O is shared between TFT display and other devices. Disable async data transfer.
+
+  #define COMPACT_MARLIN_BOOT_LOGO  // Use compressed data to save Flash space
 #endif
 
 #if ENABLED(TFT_LVGL_UI)

Marlin/Configuration_adv.h

@@ -1967,7 +1967,10 @@
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+
+  // Only one STATUS_HEAT_* option can be enabled
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define STATUS_HEAT_POWER         // Show heater output power as a vertical bar
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT
@@ -2206,7 +2209,6 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  //#define INTEGRATED_BABYSTEPPING         // Integration of babystepping into the Stepper ISR
   //#define EP_BABYSTEPPING                 // M293/M294 babystepping with EMERGENCY_PARSER support
   //#define BABYSTEP_WITHOUT_HOMING
   //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement)
@@ -3803,7 +3805,8 @@
      * Use 'M200 [T<extruder>] L<limit>' to override and 'M502' to reset.
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
-    #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT 0.00      // (mm^3/sec)
+    #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 
@@ -3836,14 +3839,17 @@
 //#define REPETIER_GCODE_M360     // Add commands originally from Repetier FW
 
 /**
- * Enable this option for a leaner build of Marlin that removes all
- * workspace offsets, simplifying coordinate transformations, leveling, etc.
- *
- *  - M206 and M428 are disabled.
- *  - G92 will revert to its behavior from Marlin 1.0.
+ * Enable this option for a leaner build of Marlin that removes
+ * workspace offsets to slightly optimize performance.
+ * G92 will revert to its behavior from Marlin 1.0.
  */
 //#define NO_WORKSPACE_OFFSETS
 
+/**
+ * Disable M206 and M428 if you don't need home offsets.
+ */
+//#define NO_HOME_OFFSETS
+
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.

Marlin/Version.h

@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2023-07-17"
+//#define STRING_DISTRIBUTION_DATE "2023-08-06"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

Marlin/src/HAL/AVR/HAL.cpp

@@ -61,23 +61,40 @@ void save_reset_reason() {
   wdt_disable();
 }
 
+#include "registers.h"
+
+MarlinHAL::MarlinHAL() {
+  TERN_(HAL_AVR_DIRTY_INIT, _ATmega_resetperipherals()); // Clean-wipe the device state.
+}
+
 void MarlinHAL::init() {
   // Init Servo Pins
-  #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
   #if HAS_SERVO_0
-    INIT_SERVO(0);
+    OUT_WRITE(SERVO0_PIN, LOW);
   #endif
   #if HAS_SERVO_1
-    INIT_SERVO(1);
+    OUT_WRITE(SERVO1_PIN, LOW);
   #endif
   #if HAS_SERVO_2
-    INIT_SERVO(2);
+    OUT_WRITE(SERVO2_PIN, LOW);
   #endif
   #if HAS_SERVO_3
-    INIT_SERVO(3);
+    OUT_WRITE(SERVO3_PIN, LOW);
   #endif
 
   init_pwm_timers();   // Init user timers to default frequency - 1000HZ
+
+  #if PIN_EXISTS(BEEPER) && ENABLED(HAL_AVR_DIRTY_INIT) && DISABLED(ATMEGA_NO_BEEPFIX)
+    // Make sure no alternative is locked onto the BEEPER.
+    // This fixes the issue where the ATmega is constantly beeping.
+    // Might disable other peripherals using the pin; to circumvent that please undefine one of the above things!
+    // The true culprit is the AVR ArduinoCore that enables peripherals redundantly.
+    // (USART1 on the GeeeTech GT2560)
+    // https://www.youtube.com/watch?v=jMgCvRXkexk
+    _ATmega_savePinAlternate(BEEPER_PIN);
+
+    OUT_WRITE(BEEPER_PIN, LOW);
+  #endif
 }
 
 void MarlinHAL::reboot() {

Marlin/src/HAL/AVR/HAL.h

@@ -187,7 +187,7 @@ class MarlinHAL {
 public:
 
   // Earliest possible init, before setup()
-  MarlinHAL() {}
+  MarlinHAL();
 
   // Watchdog
   static void watchdog_init()    IF_DISABLED(USE_WATCHDOG, {});

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -160,7 +160,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MAX_PIN);
     #endif
   #endif
-  #if HAS_Z_MIN_PIN
+  #if USE_Z_MIN
     #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PIN);
     #else

Marlin/src/HAL/AVR/inc/SanityCheck.h

@@ -33,13 +33,13 @@
  * Check for common serial pin conflicts
  */
 #define CHECK_SERIAL_PIN(N) ( \
-     X_STOP_PIN == N || Y_STOP_PIN == N || Z_STOP_PIN == N \
-  || X_MIN_PIN  == N || Y_MIN_PIN  == N || Z_MIN_PIN  == N \
-  || X_MAX_PIN  == N || Y_MAX_PIN  == N || Z_MAX_PIN  == N \
-  || X_STEP_PIN == N || Y_STEP_PIN == N || Z_STEP_PIN == N \
-  || X_DIR_PIN  == N || Y_DIR_PIN  == N || Z_DIR_PIN  == N \
-  || X_ENA_PIN  == N || Y_ENA_PIN  == N || Z_ENA_PIN  == N \
-  || BTN_EN1    == N || BTN_EN2    == N \
+     X_STOP_PIN == N || Y_STOP_PIN == N || Z_STOP_PIN  == N \
+  || X_MIN_PIN  == N || Y_MIN_PIN  == N || Z_MIN_PIN   == N \
+  || X_MAX_PIN  == N || Y_MAX_PIN  == N || Z_MAX_PIN   == N \
+  || X_STEP_PIN == N || Y_STEP_PIN == N || Z_STEP_PIN  == N \
+  || X_DIR_PIN  == N || Y_DIR_PIN  == N || Z_DIR_PIN   == N \
+  || X_ENA_PIN  == N || Y_ENA_PIN  == N || Z_ENA_PIN   == N \
+  || BTN_EN1    == N || BTN_EN2    == N || LCD_PINS_EN == N \
 )
 #if SERIAL_IN_USE(0)
   // D0-D1. No known conflicts.