added guide to use the json files of the T-Stick

docs/setup/index.md

@@ -2,5 +2,6 @@
 
 There are multiple configuration options you can change for your T-Stick if the default options are not to your liking.
 
-- __:material-wifi: [WiFi Settings](./wireless-settings.md)__
-- __:fontawesome-solid-gear: [Sensor Settings](./advanced-settings.md)__
+- __:material-wifi-settings: [WiFi Settings](./wireless-settings.md)__
+- __:fontawesome-solid-gear: [Sensor Settings](./advanced-settings.md)__
+- __:material-file-settings: [Config and Setting File](./json-settings.md)__

docs/setup/json-settings.md

@@ -0,0 +1,85 @@
+# JSON settings
+
+!!! note
+
+    This page only applies to the T-Stick 4GW/5GW and their variants.
+
+Several parameters for the T-Stick are defined in the `config.json ` and `settings.json` files in the data folder of the T-Stick firmware.
+
+## config.json Settings
+
+The `config.json` file holds configuration information for the T-Stick including the name of the device, ID number, wifi connection details and the OSC configuration details.
+
+The default `config.json` file is shown below.
+
+```
+{
+    "device": "TStick",
+    "id": 1,
+    "author": "T-Stick Builder",
+    "institution": "SAT/IDMIL (2024)",
+    "APpasswd": "mappings",
+    "wifiSSID": "tstick_network",
+    "wifiPSK": "mappings",
+    "persistentAP": 1,
+    "oscIP1": "192.168.137.1",
+    "oscPORT1": 8000,
+    "oscIP2": "0.0.0.0",
+    "oscPORT2": 8001,
+    "localPORT": 8000
+}
+```
+
+### Properties
+
+- __device__: Name of the device. Should not be changed. *(Default: TStick)*
+- __id__: ID number of the T-Stick. *(Default: 1)*
+- __author__: Owner/Builder of the T-Stick. *(Default: T-Stick Builder)*
+- __institution__: Institution that owns/builds the T-Stick. *(Default: SAT/IDMIL (2024))*
+- __APpasswd__: Password to the T-Sticks Access Point. *(Default: mappings)*
+- __wifiSSID__: Name of WiFi network the T-Stick is connecting to. *(Default: tstick_network)*
+- __wifiPSK__: Password of WiFi network the T-Stick is connecting to. *(Default: mappings)*
+- __persistentAP__: Set to 1 for the access point of the T-Stick to always be available. Should not be changed from default. *(Default: 1)*
+- __oscIP1/2__: IP address to send OSC messages to. Can be set to `0.0.0.0` to disable OSC. *(Default: oscIP1: 192.168.137.1/oscIP2: 0.0.0.0)*
+- __oscPORT1/2__: Port OSC messages are sent to. *(Default: oscPORT1: 8000/ oscPORT2: 8001)*
+- __localPORT__: Port of the OSC server of the T-Stick. *(Default: 8000)*
+
+## settings.json
+
+The `settings.json` file holds the additional information that is displayed in the t-stick web portal. 
+
+The default `settings.json` file is shown below.
+
+```
+{
+    "settings": [
+        {
+            "name": "enable_libmapper",
+            "value": 0
+        },
+        {
+            "name": "fsr_offset",
+            "value": 2000
+        },
+        {
+            "name": "touch_noise",
+            "value": 50
+        },
+        {
+            "name": "jab_threshold",
+            "value": 5
+        },
+        {
+            "name": "battery_size_mah",
+            "value": 2000
+        }
+    ]
+}
+```
+
+### Properties
+
+- __fsr_offset__: Set the minimum value of the FSR when no pressure is being applied. *(Default: 2000)*
+- __touch_noise__: Set the minimum value before a touch input is registered. Only applies to T-Sticks that use the Trill board or the EnchantiTouch board. *(Default: 50)*
+- __jab_threshold__: Set the sensitivity of the jab gesture. Larger values lower the sensitivity of the jab signal. *(Default 5)*
+- __battery_size-mah__: Set the battery size in mAh. Only applies to T-Stick 5GW using the MAX17055/MAX17262 fuel gauge. *(Default 2000)*

mkdocs.yml

@@ -72,6 +72,7 @@ nav:
     - setup/index.md
     - Changing communication protocols: setup/wireless-settings.md
     - Changing sensor settings: setup/advanced-settings.md
+    - Change settings using json file: setup/json-settings.md
   - Technical Documentation:
     - T-Stick Design Guidelines: engineering/design-guidelines.md
     - T-Stick 5GW Design Requirements: engineering/requirements.md