A collection of tips for the Sovol SV08 Printer. Mostly derived from the Official Facebook Page
Important
== Make Backups of any File you change! ==
- Run a Pid tune for the Bed and Extruder
- Home the Printer
- Calibrate the Z-Offset
- Install Orca Slicer
- Run a Temperature Tower to familiarise yourself with the speeds and flows capable, every filament has potential to be different.
- Run a Test Print
On the 2.3.3 Firmware Sovol have put the wrong PIN to control the motherboard fan. it can be fixed and improved turning it into a Temperature controlled reaactive Fan.
Credit John Hansknecht and Video here - https://www.youtube.com/watch?v=t3RJ5DbOdcs&ab_channel=JohnHansknecht
Open Printer.cfg and replace the following Text.
[fan_generic fan3] # exhaust fan
pin: PA2
max_power: 1.0
With this text
[temperature_fan fan3]
pin: PA1
kick_start_time: 0.5
max_power: 1.0
min_temp: 0
max_temp: 90
hardware_pwm: true
target_temp: 60
sensor_type: temperature_host
max_speed: 1.0
min_speed: 0.1
control: pid
pid_Kp: 2.0 ;40
pid_Ki: 5.0 ;0.2
pid_Kd: 0.5 ;0.1
pid_deriv_time: 2.0
https://www.printables.com/model/983776-minimal-shroud-for-sv08-super-beta
https://www.printables.com/model/745412-spartacus-the-toolhead
Description: Convert your SV08 to use the Voron Stealthburner printhead STL Files: Printables - SV08 Stealthburner Conversion Guide: YouTube - SV08 Stealthburner Mod
- stl - Sovol SV08 Bambulab Hotend Support Credit Nadir [Printables]
- Video - Bambu Nozzle on Your Sovol SV08! Credit 3D Printed Objects [yt]
- Description: Pre-configured profiles for PrusaSlicer specifically for the SOVOL SV08.
- GitHub Link: SV08 PrusaSlicer Profiles (Placeholder link, replace with actual if available)
- Description: Enhanced firmware for improved performance and additional features.
- GitHub Link: Sovol-SV08-Mainline