DIO0 and DIO1 optional and deep sleep for ESP device #184
Conversation
|
I would need to be in front of my computer to validate but all fail seems to be related to the added example specifically made for esp8266 device. This example is not mandatory but help to understand how to use deep sleep for this device with this library. |
Signed-off-by: sacua <[email protected]>
|
As I understand that the code is verified by github action in order to be sure that everything is compiling, I decided to remove the example and update README by adding a section deepsleep that are more related to ESP32 and ESP8266 for which in those device, all the memory is flush at deep sleep except the RTC memory. |
Custom RX delay and windows can now be set. The things stack use a Rx1 delay of 5 seconds. Cleanup RFM_Set_Tx_Power, setTxPower and setTxPower1
There was a problem hiding this comment.
Example for deep sleep with ESP device have been added. I've made also a few other modification in the code for your consideration. The most important one is the possibility to change the RX delay and windows. Under the thing stack, the RX1 delay is 5 seconds.
Similar to https://github.com/sandeepmistry/arduino-LoRa/tree/master, I've changed to code so that DIO0 and DIO1 can now be optional.
Moreover, similair to the closed issue #130, I've change some variable that were private to public, so those seetings can be explicitelly save on RTC RAM and surive deep sleep for ESP device. I've added an example for your consideration in that regards.
I've tested this code for Class A device, but not class C.