coresight: Fix disabling of CoreSight TPIU

The CoreSight TPIU should be disabled when tracing to other sinks to allow
them to operate at full bandwidth.

This patch fixes tpiu_disable_hw() to correctly disable the TPIU by
configuring the TPIU to stop on flush, initiating a manual flush, waiting
for the flush to complete and then waits for the TPIU to indicate it has
stopped.

Signed-off-by: Robert Walker <[email protected]>

drivers/hwtracing/coresight/coresight-tpiu.c

@@ -46,8 +46,11 @@
 #define TPIU_ITATBCTR0		0xef8
 
 /** register definition **/
+/* FFSR - 0x300 */
+#define FFSR_FT_STOPPED		BIT(1)
 /* FFCR - 0x304 */
 #define FFCR_FON_MAN		BIT(6)
+#define FFCR_STOP_FI		BIT(12)
 
 /**
  * @base:	memory mapped base address for this component.
@@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_drvdata *drvdata)
 {
 	CS_UNLOCK(drvdata->base);
 
-	/* Clear formatter controle reg. */
-	writel_relaxed(0x0, drvdata->base + TPIU_FFCR);
+	/* Clear formatter and stop on flush */
+	writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR);
 	/* Generate manual flush */
-	writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	/* Wait for flush to complete */
+	coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0);
+	/* Wait for formatter to stop */
+	coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1);
 
 	CS_LOCK(drvdata->base);
 }