partcl_fines_1.yaml

#------------------------------
#-- partcl_fines_1.yaml
#-- Petit code pour mesurer des particules fines
#-- Envoie sur le résultat sur un mqtt broker
#-- location: démo mobile pour l'instant
#-- zf221022.1701
#--
# sources: 
# https://esphome.io/components/sensor/sps30.html

esphome:
  name: partcl_fines_1
  on_boot:
  - switch.turn_on: led

esp8266:
  board: d1_mini

# Configuration WIFI
wifi:
  # ssid: !secret wifi_ssid_3G_zf2
  # password: !secret wifi_pass_3G_zf2

  networks:
  
    - ssid: !secret wifi_ssid_apzuzu7
    - password: !secret wifi_pass_apzuzu7
    
    - ssid: !secret wifi_ssid_apzuzu6
    - password: !secret wifi_pass_apzuzu6

    - ssid: !secret wifi_ssid_3g_s7
    - password: !secret wifi_pass_3g_s7

  #   - ssid: !secret wifi_ssid_3G_zf
  #   - password: !secret wifi_pass_3G_zf2
    
  #   - ssid: !secret wifi_ssid_3G_zf2
  #   - password: !secret wifi_pass_3G_zf2
   
  #   - ssid: !secret wifi_ssid_apzuzu6_EXT
  #   - password: !secret wifi_pass_apzuzu6_EXT


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "partcl_fines_1 Fallback"
    password: !secret ap_wifi_password

captive_portal:

# Enable logging
logger:
  level: DEBUG
  logs:
    logger: INFO
    adc: INFO
    captive_portal: INFO
    deep_sleep: INFO
    htu21d: INFO
    i2c: INFO
    ota: INFO
    restart: INFO
    sensor: INFO
    switch: INFO
    switch.gpio: INFO
    uptime.sensor: INFO
    web_server: INFO
    wifi_signal.sensor: INFO
    mqtt: INFO
    mqtt.component: INFO
    mqtt.client: INFO
    mqtt.switch: INFO
    mqtt.sensor: INFO

# # Enable Home Assistant API
# api:
#   password: !secret api_password

ota:
  password: !secret ota_password

# WEB Server
web_server:
  port: 80

# MQTT server
mqtt:
  broker:  !secret mqtt_server_dev
  port:  !secret mqtt_port_dev
  username:  !secret mqtt_user_dev
  password:  !secret mqtt_password_dev
  birth_message:
  will_message:

# I2C conf
i2c:
  sda: D2
  scl: D1
#  frequency: 10khz


# Définition des Switch's
switch:
  - platform: gpio
    name: "partcl_fines_1 LED"
    inverted: True
    id: led
    pin: D4

  - platform: restart
    name: "partcl_fines_1 Restart"

  - platform: shutdown
    name: "partcl_fines_1 Shutdown"
    id: partcl_fines_1_shutdown
    internal: true


# Définition des Scripts
script:
    # fonction BMS, shutdown si < 3.3 Volts !
  - id: my_bms
    mode: restart
    then:
      if:
        condition:
          lambda: 'return id(partcl_fines_1_bat_voltage).state < 3.3 ;'
        then:
          - logger.log: "The sensor value is below 3.3 Volts !"
          - delay: 1s
          - switch.turn_on: partcl_fines_1_shutdown


# Définition des Sensors
sensor:
  - platform: wifi_signal
    name: "partcl_fines_1 Signal Wi-Fi"
    update_interval: 5s
    on_value:
      if:
        condition:
          mqtt.connected:
        then:
          - logger.log: Je suis connected sur le mqtt et j'envoie la sauce !
          - delay: 1s
          - script.execute: my_bms
        #   - if:
        #       condition:
        #         lambda: 'return id(partcl_fines_1_sleep_mode).state == 1;'
        #       then:
        #         - delay: 1s
        #         - logger.log: On me demande de dormir !
        #         - deep_sleep.enter: deep_sleep_1
        # else:
        #   - logger.log: Erreur 007 *********************************************************
        #   - deep_sleep.enter: deep_sleep_1

  - platform: uptime
    name: "partcl_fines_1 uptime"
    update_interval: 15s

# tension VCC à l'intérieur de l'ESP
  - platform: adc
    pin: VCC
    name: "partcl_fines_1 VCC Voltage"
    id: partcl_fines_1_vcc_voltage
    update_interval: 2s
    unit_of_measurement: "V"
    accuracy_decimals: 3
    internal: true

# tension de la batterie
  - platform: template
    name: "partcl_fines_1 BAT Voltage"
    id: partcl_fines_1_bat_voltage
    update_interval: 2s
    unit_of_measurement: "V"
    accuracy_decimals: 3
    lambda: return id(partcl_fines_1_vcc_voltage).state + 1.148 ;
 
# capacité de la batterie
  - platform: template
    name: "partcl_fines_1 BAT capacity"
    update_interval: 2s
    unit_of_measurement: "%"
    accuracy_decimals: 0
    lambda: return id(partcl_fines_1_bat_voltage).state ;
    filters:
      - calibrate_linear:
          - 3.5 -> 0.0
          - 4.0 -> 100.0
      # filtre la valeur minimale
      - lambda: |-
          if (x >= 0) 
            return x;
          else 
            return 0;
      # filtre la valeur maximale
      - lambda: |-
          if (x <= 100) 
            return x;
          else 
            return 100;


# Définition des Sensors text
text_sensor:
  - platform: version
    name: "partcl_fines_1 Version 1659"

  - platform: wifi_info
    ip_address:
      name: partcl_fines_1 IP Address
      id: wifi_ip
    ssid:
      name: partcl_fines_1 Connected SSID
      id: wifi_ssid