Skip to content

Latest commit

 

History

History
126 lines (98 loc) · 4.2 KB

vm-build.md

File metadata and controls

126 lines (98 loc) · 4.2 KB
Raw

VM Setup Instructions

This library's repository includes some Chromium files that are painful to build. Chromium's build process is a bit fussy, and the Android target is even more fussy, so the least painful way of getting it done is to set up a VM with the exact software that the build process was designed for.

This document contains step-by-step instructions for setting up the build VM and building the files used in this library.

VM Building

These are the manual steps for setting up a VM. They only need to be done once.

  1. Get the 64-bit ISO for Ubuntu Server 12.10.

  2. Set up a VirtualBox VM.

    • Name: ChromeWebView
    • Type: Linux
    • Version: Ubuntu 64-bit
    • RAM: 4096Mb
    • Disk: VDI, dynamic, 48Gb

  3. Change the settings (Machine > Settings in the VirtualBox menu)

    • System > Processor > Processor(s): 4 (number of CPU cores on the machine)
    • Audio > uncheck Enable Audio
    • Network > Adapter 1 > Advanced > Adapter Type: virtio-net
    • Network > Adapter 2
      • check Enable network adapter
      • Attached to > Host-only Adapter
      • Advanced > Adapter Type: virtio-net
    • Ports > USB > uncheck Enable USB 2.0 (EHCI) Controller

  4. Start VM and set up the server.

    • Select the Ubuntu ISO downloaded earlier.
    • Start a server installation, providing default answers, except:
      • Hostname: crbuild
      • Full name: crbuild
      • Username: crbuild
      • Password: crbuild
      • Confirm using a weak password
      • Encrypt home directory: no
      • Partitioning: Guided - use entire disk (no LVM or encryption)
      • Software to install: OpenSSH server

  5. After the VM restarts, set up networking.

    • Log in using the VM console.
    • Open /etc/network/interfaces in a text editor (sudo vim ...)
    • Duplicate the "primary network interface" section
    • In the duplicate section, replace-all eth0 with eth1, primary with secondary
    • Save the file.
    • sudo apt-get install -y avahi-daemon
    • sudo reboot

  6. Prepare to SSH into the VM.

    • If you don't have an ssh key
      • ssh-keygen -t rsa
      • press Enter all the way (default key type, no passphrase)
    ssh-copy-id [email protected]
ssh [email protected]

  7. Get the Oracle Java 6 JDK.

    exit  # Get out of the VM ssh session, run this on the host.
scp ~/Downloads/jdk-6u*-linux-x64.bin [email protected]:~/jdk6.bin

  8. Set up the VM builds target platform(s). Choosing more than one platform will result in no incremental building being done.

    # ssh [email protected]
touch ~/.build_arm
touch ~/.build_x86

  9. Optionally set the path of the directory that will hold the Chromium source code to. This is only used the first time the setup script runs, so it only needs to be set once.

    export CHROMIUM_DIR=/mnt/chromium

VM Setup

The setup script will complete the work done above. The script is idempotent, so it can be ran to bring a VM's software up to date.

# ssh [email protected]
curl -fLsS https://github.com/pwnall/chromeview/raw/master/crbuild/vm-setup.sh | sh

If the script fails, the steps in vm-setup.sh can be copy-pasted one by one in the VM's ssh console. Please open an issue or pull request if the script fails.

If this is the first time the Chromium source code is downloaded and $CHROMIUM_DIR is defined, the directory at that path will be created and symlinked into ~/chromium. The source code can be moved around, as long as the symlink is updated.

Building

The build script will update the Chromium source code and do a build. For infrequent builds, the setup script above should be ran before a build.

# ssh [email protected]
curl -fLsS https://github.com/pwnall/chromeview/raw/master/crbuild/vm-build.sh | sh