New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

ARM Devices - Supported Platforms: Add instructions to make bluetooth work on Raspberry pi 4 #677

Open

xoich opened this issue May 21, 2022 · 0 comments

xoich commented May 21, 2022 •

edited

Loading

Following the instruction on the Bluetooth doc are not enough to make Bluetooth work on Raspberry pi 4 (the Bluetooth device is not found).

This guide shows how to do it (ignore the Arch ARM specifics)

These are the relevant steps on Void:

Remove the line dtoverlay=bcmbt (if present) from /boot/config.txt and add the following line to the same file:
dtparam=krnbt=on
Make sure that enable_uart=0 is also in /boot/config.txt.
In /boot/cmdline.txt, remove all references to ttyAMA0

The text was updated successfully, but these errors were encountered:

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment