Skip to content

Latest commit

 

History

History
659 lines (452 loc) · 22.1 KB

check-before-deployment.md

File metadata and controls

659 lines (452 loc) · 22.1 KB
title summary aliases
TiDB Environment and System Configuration Check
Learn the environment check operations before deploying TiDB.
/docs/dev/check-before-deployment/

TiDB Environment and System Configuration Check

This document describes the environment check operations before deploying TiDB. The following steps are ordered by priorities.

Mount the data disk ext4 filesystem with options on the target machines that deploy TiKV

For production deployments, it is recommended to use NVMe SSD of EXT4 filesystem to store TiKV data. This configuration is the best practice, whose reliability, security, and stability have been proven in a large number of online scenarios.

Log in to the target machines using the root user account.

Format your data disks to the ext4 filesystem and add the nodelalloc and noatime mount options to the filesystem. It is required to add the nodelalloc option, or else the TiUP deployment cannot pass the precheck. The noatime option is optional.

Note:

If your data disks have been formatted to ext4 and have added the mount options, you can uninstall it by running the umount /dev/nvme0n1p1 command, skip directly to the fifth step below to edit the /etc/fstab file, and add the options again to the filesystem.

Take the /dev/nvme0n1 data disk as an example:

  1. View the data disk.

    {{< copyable "shell-root" >}}

    fdisk -l
    Disk /dev/nvme0n1: 1000 GB
    
  2. Create the partition.

    {{< copyable "shell-root" >}}

    parted -s -a optimal /dev/nvme0n1 mklabel gpt -- mkpart primary ext4 1 -1

    Note:

    Use the lsblk command to view the device number of the partition: for a NVMe disk, the generated device number is usually nvme0n1p1; for a regular disk (for example, /dev/sdb), the generated device number is usually sdb1.

  3. Format the data disk to the ext4 filesystem.

    {{< copyable "shell-root" >}}

    mkfs.ext4 /dev/nvme0n1p1
  4. View the partition UUID of the data disk.

    In this example, the UUID of nvme0n1p1 is c51eb23b-195c-4061-92a9-3fad812cc12f.

    {{< copyable "shell-root" >}}

    lsblk -f
    NAME    FSTYPE LABEL UUID                                 MOUNTPOINT
    sda
    ├─sda1  ext4         237b634b-a565-477b-8371-6dff0c41f5ab /boot
    ├─sda2  swap         f414c5c0-f823-4bb1-8fdf-e531173a72ed
    └─sda3  ext4         547909c1-398d-4696-94c6-03e43e317b60 /
    sr0
    nvme0n1
    └─nvme0n1p1 ext4         c51eb23b-195c-4061-92a9-3fad812cc12f
    
  5. Edit the /etc/fstab file and add the nodelalloc mount options.

    {{< copyable "shell-root" >}}

    vi /etc/fstab
    UUID=c51eb23b-195c-4061-92a9-3fad812cc12f /data1 ext4 defaults,nodelalloc,noatime 0 2
    
  6. Mount the data disk.

    {{< copyable "shell-root" >}}

    mkdir /data1 && \
    mount -a
  7. Check using the following command.

    {{< copyable "shell-root" >}}

    mount -t ext4
    /dev/nvme0n1p1 on /data1 type ext4 (rw,noatime,nodelalloc,data=ordered)
    

    If the filesystem is ext4 and nodelalloc is included in the mount options, you have successfully mount the data disk ext4 filesystem with options on the target machines.

Check and disable system swap

This section describes how to disable swap.

TiDB requires sufficient memory space for operation. It is not recommended to use swap as a buffer for insufficient memory, which might reduce performance. Therefore, it is recommended to disable the system swap permanently.

Do not disable the system swap by executing swapoff -a, or this setting will be invalid after the machine is restarted.

To disable the system swap, execute the following command:

{{< copyable "shell-regular" >}}

echo "vm.swappiness = 0">> /etc/sysctl.conf
swapoff -a && swapon -a
sysctl -p

Check and stop the firewall service of target machines

In TiDB clusters, the access ports between nodes must be open to ensure the transmission of information such as read and write requests and data heartbeats. In common online scenarios, the data interaction between the database and the application service and between the database nodes are all made within a secure network. Therefore, if there are no special security requirements, it is recommended to stop the firewall of the target machine. Otherwise, refer to the port usage and add the needed port information to the allowlist of the firewall service.

The rest of this section describes how to stop the firewall service of a target machine.

  1. Check the firewall status. Take CentOS Linux release 7.7.1908 (Core) as an example.

    {{< copyable "shell-regular" >}}

    sudo firewall-cmd --state
    sudo systemctl status firewalld.service
  2. Stop the firewall service.

    {{< copyable "shell-regular" >}}

    sudo systemctl stop firewalld.service
  3. Disable automatic start of the firewall service.

    {{< copyable "shell-regular" >}}

    sudo systemctl disable firewalld.service
  4. Check the firewall status.

    {{< copyable "shell-regular" >}}

    sudo systemctl status firewalld.service

Check and install the NTP service

TiDB is a distributed database system that requires clock synchronization between nodes to guarantee linear consistency of transactions in the ACID model.

At present, the common solution to clock synchronization is to use the Network Time Protocol (NTP) services. You can use the pool.ntp.org timing service on the Internet, or build your own NTP service in an offline environment.

To check whether the NTP service is installed and whether it synchronizes with the NTP server normally, take the following steps:

  1. Run the following command. If it returns running, then the NTP service is running.

    {{< copyable "shell-regular" >}}

    sudo systemctl status ntpd.service
    ntpd.service - Network Time Service
    Loaded: loaded (/usr/lib/systemd/system/ntpd.service; disabled; vendor preset: disabled)
    Active: active (running) since 一 2017-12-18 13:13:19 CST; 3s ago
    
  2. Run the ntpstat command to check whether the NTP service synchronizes with the NTP server.

    Note:

    For the Ubuntu system, you need to install the ntpstat package.

    {{< copyable "shell-regular" >}}

    ntpstat
    • If it returns synchronised to NTP server (synchronizing with the NTP server), then the synchronization process is normal.

      synchronised to NTP server (85.199.214.101) at stratum 2
      time correct to within 91 ms
      polling server every 1024 s
      
    • The following situation indicates the NTP service is not synchronizing normally:

      unsynchronised
      
    • The following situation indicates the NTP service is not running normally:

      Unable to talk to NTP daemon. Is it running?
      

To make the NTP service start synchronizing as soon as possible, run the following command. Replace pool.ntp.org with your NTP server.

{{< copyable "shell-regular" >}}

sudo systemctl stop ntpd.service && \
sudo ntpdate pool.ntp.org && \
sudo systemctl start ntpd.service

To install the NTP service manually on the CentOS 7 system, run the following command:

{{< copyable "shell-regular" >}}

sudo yum install ntp ntpdate && \
sudo systemctl start ntpd.service && \
sudo systemctl enable ntpd.service

Check and configure the optimal parameters of the operating system

For TiDB in the production environment, it is recommended to optimize the operating system configuration in the following ways:

  1. Disable THP (Transparent Huge Pages). The memory access pattern of databases tends to be sparse rather than consecutive. If the high-level memory fragmentation is serious, higher latency will occur when THP pages are allocated.
  2. Set the I/O Scheduler of the storage media to noop. For the high-speed SSD storage media, the kernel's I/O scheduling operations can cause performance loss. After the Scheduler is set to noop, the performance is better because the kernel directly sends I/O requests to the hardware without other operations. Also, the noop Scheduler is better applicable.
  3. Choose the performance mode for the cpufrequ module which controls the CPU frequency. The performance is maximized when the CPU frequency is fixed at its highest supported operating frequency without dynamic adjustment.

Take the following steps to check the current operating system configuration and configure optimal parameters:

  1. Execute the following command to see whether THP is enabled or disabled:

    {{< copyable "shell-regular" >}}

    cat /sys/kernel/mm/transparent_hugepage/enabled
    [always] madvise never
    

    Note:

    If [always] madvise never is output, THP is enabled. You need to disable it.

  2. Execute the following command to see the I/O Scheduler of the disk where the data directory is located. Assume that you create data directories on both sdb and sdc disks:

    {{< copyable "shell-regular" >}}

    cat /sys/block/sd[bc]/queue/scheduler
    noop [deadline] cfq
    noop [deadline] cfq
    

    Note:

    If noop [deadline] cfq is output, the I/O Scheduler for the disk is in the deadline mode. You need to change it to noop.

  3. Execute the following command to see the ID_SERIAL of the disk:

    {{< copyable "shell-regular" >}}

    udevadm info --name=/dev/sdb | grep ID_SERIAL
    E: ID_SERIAL=36d0946606d79f90025f3e09a0c1f9e81
    E: ID_SERIAL_SHORT=6d0946606d79f90025f3e09a0c1f9e81
    

    Note:

    If multiple disks are allocated with data directories, you need to execute the above command several times to record the ID_SERIAL of each disk.

  4. Execute the following command to see the power policy of the cpufreq module:

    {{< copyable "shell-regular" >}}

    cpupower frequency-info --policy
    analyzing CPU 0:
    current policy: frequency should be within 1.20 GHz and 3.10 GHz.
                  The governor "powersave" may decide which speed to use within this range.
    

    Note:

    If The governor "powersave" is output, the power policy of the cpufreq module is powersave. You need to modify it to performance. If you use a virtual machine or a cloud host, the output is usually Unable to determine current policy, and you do not need to change anything.

  5. Configure optimal parameters of the operating system:

    • Method one: Use tuned (Recommended)

      1. Execute the tuned-adm list command to see the tuned profile of the current operating system:

        {{< copyable "shell-regular" >}}

        tuned-adm list
        Available profiles:
        - balanced                    - General non-specialized tuned profile
        - desktop                     - Optimize for the desktop use-case
        - hpc-compute                 - Optimize for HPC compute workloads
        - latency-performance         - Optimize for deterministic performance at the cost of increased power consumption
        - network-latency             - Optimize for deterministic performance at the cost of increased power consumption, focused on low latency network performance
        - network-throughput          - Optimize for streaming network throughput, generally only necessary on older CPUs or 40G+ networks
        - powersave                   - Optimize for low power consumption
        - throughput-performance      - Broadly applicable tuning that provides excellent performance across a variety of common server workloads
        - virtual-guest               - Optimize for running inside a virtual guest
        - virtual-host                - Optimize for running KVM guests
        Current active profile: balanced
        

        The output Current active profile: balanced means that the tuned profile of the current operating system is balanced. It is recommended to optimize the configuration of the operating system based on the current profile.

      2. Create a new tuned profile:

        {{< copyable "shell-regular" >}}

        mkdir /etc/tuned/balanced-tidb-optimal/
        vi /etc/tuned/balanced-tidb-optimal/tuned.conf
        [main]
        include=balanced
        
        [cpu]
        governor=performance
        
        [vm]
        transparent_hugepages=never
        
        [disk]
        devices_udev_regex=(ID_SERIAL=36d0946606d79f90025f3e09a0c1fc035)|(ID_SERIAL=36d0946606d79f90025f3e09a0c1f9e81)
        elevator=noop
        

        The output include=balanced means to add the optimization configuration of the operating system to the current balanced profile.

      3. Apply the new tuned profile:

        {{< copyable "shell-regular" >}}

        tuned-adm profile balanced-tidb-optimal
    • Method two: Configure using scripts. Skip this method if you already use method one.

      1. Execute the grubby command to see the default kernel version:

        Note:

        Install the grubby package first before you execute grubby.

        {{< copyable "shell-regular" >}}

        grubby --default-kernel
        /boot/vmlinuz-3.10.0-957.el7.x86_64
      2. Execute grubby --update-kernel to modify the kernel configuration:

        {{< copyable "shell-regular" >}}

        grubby --args="transparent_hugepage=never" --update-kernel /boot/vmlinuz-3.10.0-957.el7.x86_64

        Note:

        --update-kernel is followed by the actual default kernel version.

      3. Execute grubby --info to see the modified default kernel configuration:

        {{< copyable "shell-regular" >}}

        grubby --info /boot/vmlinuz-3.10.0-957.el7.x86_64

        Note:

        --info is followed by the actual default kernel version.

        index=0
        kernel=/boot/vmlinuz-3.10.0-957.el7.x86_64
        args="ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8 transparent_hugepage=never"
        root=/dev/mapper/centos-root
        initrd=/boot/initramfs-3.10.0-957.el7.x86_64.img
        title=CentOS Linux (3.10.0-957.el7.x86_64) 7 (Core)
        
      4. Modify the current kernel configuration to immediately disable THP:

        {{< copyable "shell-regular" >}}

        echo never > /sys/kernel/mm/transparent_hugepage/enabled
        echo never > /sys/kernel/mm/transparent_hugepage/defrag
      5. Configure the I/O Scheduler in the udev script:

        {{< copyable "shell-regular" >}}

        vi /etc/udev/rules.d/60-tidb-schedulers.rules
        ACTION=="add|change", SUBSYSTEM=="block", ENV{ID_SERIAL}=="36d0946606d79f90025f3e09a0c1fc035", ATTR{queue/scheduler}="noop"
        ACTION=="add|change", SUBSYSTEM=="block", ENV{ID_SERIAL}=="36d0946606d79f90025f3e09a0c1f9e81", ATTR{queue/scheduler}="noop"
        
        
      6. Apply the udev script:

        {{< copyable "shell-regular" >}}

        udevadm control --reload-rules
        udevadm trigger --type=devices --action=change
      7. Create a service to configure the CPU power policy:

        {{< copyable "shell-regular" >}}

        cat  >> /etc/systemd/system/cpupower.service << EOF
        [Unit]
        Description=CPU performance
        [Service]
        Type=oneshot
        ExecStart=/usr/bin/cpupower frequency-set --governor performance
        [Install]
        WantedBy=multi-user.target
        EOF
      8. Apply the CPU power policy configuration service:

        {{< copyable "shell-regular" >}}

        systemctl daemon-reload
        systemctl enable cpupower.service
        systemctl start cpupower.service
  6. Execute the following command to verify the THP status:

    {{< copyable "shell-regular" >}}

    cat /sys/kernel/mm/transparent_hugepage/enabled
    always madvise [never]
    
  7. Execute the following command to verify the I/O Scheduler of the disk where the data directory is located:

    {{< copyable "shell-regular" >}}

    cat /sys/block/sd[bc]/queue/scheduler
    [noop] deadline cfq
    [noop] deadline cfq
    
  8. Execute the following command to see the power policy of the cpufreq module:

    {{< copyable "shell-regular" >}}

    cpupower frequency-info --policy
    analyzing CPU 0:
    current policy: frequency should be within 1.20 GHz and 3.10 GHz.
                  The governor "performance" may decide which speed to use within this range.
    
  9. Execute the following commands to modify the sysctl parameters:

    {{< copyable "shell-regular" >}}

    echo "fs.file-max = 1000000">> /etc/sysctl.conf
    echo "net.core.somaxconn = 32768">> /etc/sysctl.conf
    echo "net.ipv4.tcp_tw_recycle = 0">> /etc/sysctl.conf
    echo "net.ipv4.tcp_syncookies = 0">> /etc/sysctl.conf
    echo "vm.overcommit_memory = 1">> /etc/sysctl.conf
    echo "vm.swappiness = 0">> /etc/sysctl.conf
    sysctl -p
  10. Execute the following command to configure the user's limits.conf file:

    {{< copyable "shell-regular" >}}

    cat << EOF >>/etc/security/limits.conf
    tidb           soft    nofile          1000000
    tidb           hard    nofile          1000000
    tidb           soft    stack          32768
    tidb           hard    stack          32768
    EOF

Manually configure the SSH mutual trust and sudo without password

This section describes how to manually configure the SSH mutual trust and sudo without password. It is recommended to use TiUP for deployment, which automatically configure SSH mutual trust and login without password. If you deploy TiDB clusters using TiUP, ignore this section.

  1. Log in to the target machine respectively using the root user account, create the tidb user and set the login password.

    {{< copyable "shell-root" >}}

    useradd tidb && \
    passwd tidb
  2. To configure sudo without password, run the following command, and add tidb ALL=(ALL) NOPASSWD: ALL to the end of the file:

    {{< copyable "shell-root" >}}

    visudo
    tidb ALL=(ALL) NOPASSWD: ALL
    
  3. Use the tidb user to log in to the control machine, and run the following command. Replace 10.0.1.1 with the IP of your target machine, and enter the tidb user password of the target machine as prompted. After the command is executed, SSH mutual trust is already created. This applies to other machines as well. Newly created tidb users do not have the .ssh directory. To create such a directory, execute the command that generates the RSA key. To deploy TiDB components on the control machine, configure mutual trust for the control machine and the control machine itself.

    {{< copyable "shell-regular" >}}

    ssh-keygen -t rsa
    ssh-copy-id -i ~/.ssh/id_rsa.pub 10.0.1.1
  4. Log in to the control machine using the tidb user account, and log in to the IP of the target machine using ssh. If you do not need to enter the password and can successfully log in, then the SSH mutual trust is successfully configured.

    {{< copyable "shell-regular" >}}

    ssh 10.0.1.1
  5. After you log in to the target machine using the tidb user, run the following command. If you do not need to enter the password and can switch to the root user, then sudo without password of the tidb user is successfully configured.

    {{< copyable "shell-regular" >}}

    sudo -su root

Install the numactl tool

This section describes how to install the NUMA tool. In online environments, because the hardware configuration is usually higher than required, to better plan the hardware resources, multiple instances of TiDB or TiKV can be deployed on a single machine. In such scenarios, you can use NUMA tools to prevent the competition for CPU resources which might cause reduced performance.

Note:

  • Binding cores using NUMA is a method to isolate CPU resources and is suitable for deploying multiple instances on highly configured physical machines.
  • After completing deployment using tiup cluster deploy, you can use the exec command to perform cluster level management operations.
  1. Log in to the target node to install. Take CentOS Linux release 7.7.1908 (Core) as an example.

    {{< copyable "shell-regular" >}}

    sudo yum -y install numactl
  2. Run the exec command using tiup cluster to install in batches.

    {{< copyable "shell-regular" >}}

    tiup cluster exec --help
    Run shell command on host in the tidb cluster
    Usage:
    cluster exec <cluster-name> [flags]
    Flags:
        --command string   the command run on cluster host (default "ls")
    -h, --help             help for exec
        --sudo             use root permissions (default false)
    

    To use the sudo privilege to execute the installation command for all the target machines in the tidb-test cluster, run the following command:

    {{< copyable "shell-regular" >}}

    tiup cluster exec tidb-test --sudo --command "yum -y install numactl"