Skip to content

Latest commit

 

History

History
15 lines (10 loc) · 1001 Bytes

README.md

File metadata and controls

15 lines (10 loc) · 1001 Bytes
Raw

Mirobot Chassis

This repository contains the files that are needed to laser cut the chassis for Mirobot (http://mirobot.io). There are a few different files here:

  • mirobot_chassis_design.pdf - this is the main working file for Mirobot, but can't be used for laser cutting. It can be edited in Illustrator
  • mirobot_chassis_lasercut.pdf / .dxf / .svg - these files are the laser-cuttable outlines laid out for cutting as pdf, svg and dxf file types

These designs are currently designed to be cut from 3mm MDF board.

This repository is in a state of development, see the releases for known good snapshots. No guarantees are made - laser cut at your own risk!

Licensing

Mirobot is an open hardware project licensed under the TAPR Open Hardware License (http://www.tapr.org/ohl.html). The name Mirobot may not be used commercially without permission. If you have any questions please get in touch ([email protected])