Skip to content

Latest commit

 

History

History
158 lines (129 loc) · 7.17 KB

ConstPropagationPass.md

File metadata and controls

158 lines (129 loc) · 7.17 KB
Raw

Constant Propagation for ONNX operations

This document describes --constprop-onnx pass which is used to do constant propagation for operations in the ONNX dialect.

source code.

Example

Given the following code:

func @foo() -> tensor<1xf32> {
  %0 = "onnx.Constant"() {value = dense<[1.0]> : tensor<1xf32>} : () -> tensor<1xf32>
  %1 = "onnx.Constant"() {value = dense<[2.0]> : tensor<1xf32>} : () -> tensor<1xf32>
  %2 = "onnx.Add"(%0, %1) : (tensor<1xf32> , tensor<1xf32>) -> tensor<1xf32>
  %3 = "onnx.Constant"() {value = dense<[3.0]> : tensor<1xf32>} : () -> tensor<1xf32>
  %4 = "onnx.Add"(%2, %3) : (tensor<1xf32> , tensor<1xf32>) -> tensor<1xf32>
  "std.return"(%4) : (tensor<1xf32>) -> ()
}

If we call onnx-mlir-op --constprop-onnx, we will get:

func @foo() -> tensor<1xf32> {
  %0 = "onnx.Constant"() {value = dense<[6.0]> : tensor<1xf32>} : () -> tensor<1xf32>
  "std.return"(%0) : (tensor<1xf32>) -> ()
}

Remark

ONNXConstantOp uses MLIR DenseElementsAttr to store constant values. It is important to note that, once a DenseElementsAttr is created, it is alive and consumes memory until the end of compilation. In Example, all the three DenseElementsAttrs in the three ONNXConstantOps exist until the end of compilation. Especially, two intermediate DenseElementsAttrs in the two ONNXConstantOps produced by folding the two ONNXAddOps also exist. For a real world model, the number of intermediate DenseElementsAttrs will increase quickly, which leads to a large memory footprint during compilation.

To avoid creating too many DenseElementsAttrs for intermediate ONNXConstantOps during --constprop-onnx, we designed a mechanism that dynamically allocates and deallocates buffers for intermediate ONNXConstantOps and only creates DenseElementsAttr after constant propagation and other ONNX dialect passes, just before lowering to Krnl (or any other target dialect).

This is accomplished with a custom attribute DisposableElementsAttr which acts as a substitute for DenseElementsAttr for the common case of non-complex scalar element types: bool and integer and floating point types. DisposableElementsAttr implements the same ElementsAttr interface as DenseElementsAttr and in most cases they are functionally identical and the surrounding code doesn't need to distinguish. It just needs to use the OnnxElementsAttrBuilder class and ElementsAttrHelper functions to construct and access ElementsAttr instances to reap the the memory footprint and performance benefits.

The deallocation of DisposableElementsAttr buffers happens between compiler passes in DisposableGarbageCollector, which is run by the PassManager between "module" passes (which are guaranteed to "stop the world" with no other passes executing in parallel) as an "instrumentation".

DisposableElementsAttr offers other memory and speed benefits which are outlined in the comments in the class source file and are explained in the presentation from November 2022, linked from the meeting wiki page.

Write rules for constant propagation

We use MLIR declarative rewriting rules (DRR) to write patterns for constant propagation. The DRR definition used for defining patterns is shown below:

class Pattern<
   dag sourcePattern,
   list<dag> resultPatterns,
   list<dag> additionalConstraints = [],
   list<dag> supplementalPatterns = [],
   dag benefitsAdded = (addBenefit 0)
>;

More information about DRR can be found here.

Now, we go through a simple example that adds constant propagation for ONNXAddOp.

Step 1: Write DRR patterns

We first add a pattern to ConstProp.td.

// Constant Propagation for Add
def AddConstProp : Pat<
    // source patten: From add(lhs, rhs).
    (ONNXAddOp:$addOp (ONNXConstantOp:$lhs $_, $_, $_, $_, $_, $_, $_, $_),
                      (ONNXConstantOp:$rhs $_, $_, $_, $_, $_, $_, $_, $_)),
    // result pattern: To c = lhs + rhs 
    (CreateAddOfTwoConst $addOp, $lhs, $rhs),
    // Additional constraints: if both lhs and rhs are dense constants.
    [(IsFromDenseONNXConstantOp:$lhs), (IsFromDenseONNXConstantOp:$rhs)]>;

The above pattern will replace an ONNXAddOp whose inputs are constants by a new constant by adding the inputs at compile time. To check if an input is a constant, using ONNXConstantOp is not enough since the constant tensor can be sparse and we now support dense constant tensors only. We need additionallly check a dense constant tensor by using IsFromDenseONNXConstantOp.

In the result pattern, to produce a ONNXConstantOp, we will add lhs and rhs at compile time, and emit an ONNXConstantOp. To minimize the memory footprint, this ONNXConstantOp has a DisposableElementsAttr instead of a conventional DenseElementsAttr.

Function CreateAddOfTwoConst will do the addition at compile time and return an ONNXConstantOp.

def CreateAddOfTwoConst :
   NativeCodeCall<"ConstPropElementwiseBinary<mlir::ONNXAddOp>($_builder, $0, $1, $2)">;

Step 2: Prepare array buffers for inputs and result

Function CreateAddOfTwoConst in the pattern calls ConstPropElementwiseBinary in ConstProp.cpp whose content is as follows.

template <typename ElementwiseBinaryOp>
Value ConstPropElementwiseBinary(PatternRewriter &rewriter,
    Value replacingValue, Value lhsValue, Value rhsValue) {
  ConstPropCounters::count("ElementwiseBinary", {lhsValue, rhsValue});
  Type replacingType = replacingValue.getType().cast<ShapedType>();

  // Get lhs and rhs ElementsAttr from the values' defining constant ops.
  ElementsAttr lhs = getConstValueElements(lhsValue);
  ElementsAttr rhs = getConstValueElements(rhsValue);

  Type operandsElemType = lhs.getElementType();
  assert(operandsElemType == rhs.getElementType() &&
         "all element-wise binary ops have matching operands element types");
  OnnxElementsAttrBuilder elementsBuilder(rewriter.getContext());
  ElementsAttr resultElements = elementsBuilder.combine(lhs, rhs, replacingType,
      combinerOfElementwiseBinaryOp<ElementwiseBinaryOp>(operandsElemType));

  // Construct and return a new ONNXConstantOp with the resultElements attribute.
  return createReplacingConstantOp(rewriter, replacingValue, resultElements)
      .getResult();
}

where OnnxElementsAttrBuilder.combine(...) broadcasts the lhs and rhs elements, as needed, and constructs a new (Disposable) ElementsAttr whose elements are the result of element-wise application of the binary function combinerOfElementwiseBinaryOp<ElementwiseBinaryOp>(operandsElemType) which maps the ElementwiseBinaryOp ONNX op to a c++ operator.

TODO: Describe how to add OnnxElementsAttrBuilder builder methods for new ops

For more information about constant propagation, please see ConstProp.td and ConstProp.cpp.