Skip to content

serverless-qe/serverless-operator

 
 

Repository files navigation

Red Hat Serverless Operator

Provides a collection of API's to support deploying and serving of serverless applications and functions.

Requirements

For the scripts in this repository to work properly, the following requirements apply.

  • podman aliased to docker or docker (17.05 or newer) (only if you need/want to build images from code)
  • bash (4.0.0 or newer)
  • make
  • helm

Install an unreleased version

To install an unreleased version (either nightly from HEAD or the respective version from an already cut branch), you can follow these steps. You can replace the crc start step with whatever cluster you might want to use. Also make sure to check out the respective branch of the version you want to install first.

$ crc start --cpus=6 --memory 16384
$ unset DOCKER_REPO_OVERRIDE # This makes sure that pre-built images are used
$ make install

Development and private cluster testing

tl;dr

If you want to quickly run the most relevant tests locally (those that are required by the CI environment), use these commands:

$ crc start --cpus=6 --memory 16384
$ export DOCKER_REPO_OVERRIDE=quay.io/username
$ make images test-operator

CRC-based cluster

If you want to use CRC to run tests locally, the following configuration has been tested to work with the operator E2E tests.

crc start --cpus=6 --memory 16384

Creating the images

To test the Serverless Operator against your private Openshift cluster you first need to push the necessary images to a publicly available location. To do that, make sure the DOCKER_REPO_OVERRIDE environment variable is set to a docker repository you can push to, for example quay.io/markusthoemmes. You might need to run docker login to be able to push images. Now run make images and all images in this repository will now be built and pushed to your docker repository.

Creating the images on cluster

make images requires docker or podman to build images, by setting ON_CLUSTER_BUILDS=true env variable, make images will build images using OpenShift Build and they will be available at the in-cluster registry image-registry.openshift-image-registry.svc:5000/openshift-marketplace/<image_name>.

To install the system using those images, use DOCKER_REPO_OVERRIDE=image-registry.openshift-image-registry.svc:5000/openshift-marketplace

Installing the system

Use the appropriate make targets or scripts in hack:

  • make dev: Deploys the serverless-operator without deploying Knative Serving, Eventing and Kafka components.
  • make install: Scales the cluster appropriately, deploys serverless-operator, Knative Serving and Eventing.
  • make install-all: Scales the cluster appropriately, deploys serverless-operator, Knative Serving, Eventing and Kafka.
  • make install-serving: Scales the cluster appropriately, deploys serverless-operator and Knative Serving.
  • make install-eventing: Scales the cluster appropriately, deploys serverless-operator and Knative Eventing.
  • make install-kafka: Scales the cluster appropriately, deploys serverless-operator, Knative Eventing and Knative Kafka in knative-eventing namespace by default. Requires to install a Strimzi cluster with make install-strimzi.
  • make install-previous: same as make install but deploy previous serverless-operator version.
  • make install-strimzi: Install the latest Strimzi operator and a kafka cluster instance in kafka namespace by default.
  • make unistall-strimzi: Uninstall the Strimzi operator and any existing kafka cluster instance.
  • make install-mesh: Install service mesh operator, Istio Gateway and PeerAuthentication to use Knative Serving + Eventing for secure traffic.
  • make uninstall-mesh : Uninstall service mesh operator, Istio Gateway and PeerAuthentication.

Note: Don't forget you can chain make targets. make images dev is handy for example.

Updating the release files

To update release files with variables stored in project.yaml we use generate scripts and a templates. Update those based on your needs, and generate the files with:

make release-files

Running tests

serverless-operator tests

  • make test-unit: Runs unit tests.
  • make test-e2e: Scales, installs and runs E2E tests (except for Knative Kafka components).
  • make test-e2e-with-kafka: Scales, installs and runs E2E tests (also tests Knative Kafka components).
  • make install-mesh test-e2e: Scales, installs and runs E2E tests, including ServiceMesh integration tests
  • make test-operator: Runs unit and E2E tests.

knative-serving and knative-eventing E2E tests

  • make test-upstream-upgrade: Installs a previous version of Serverless and runs Knative Serving upgrade tests. Requirements:
    1. Running OCP cluster.
    2. Knative Serving images that the current Serverless operator depends on are published in CI registry. This requirement is automatically met when the respective branch in Knative Serving is created and its pre-submit CI checks run at least once.
    3. The path ${GOPATH}/src/knative.dev/serving containing Knative Serving sources from the desired branch. This should be checked out before running tests.
  • make test-upstream-e2e-no-upgrade: Installs the latest version of Serverless and runs Knative Serving and Knative Eventing E2E tests (without upgrades). Requirements:
    1. Running OCP cluster.
    2. Knative Serving and Knative Eventing images that the current Serverless operator depends on are published in CI registry. This requirement is automatically met when the respective branches in Knative Serving and Knative Eventing are created, and their pre-submit CI checks run at least once.
    3. The path ${GOPATH}/src/knative.dev/serving containing Knative Serving sources from the desired branch. The path ${GOPATH}/src/knative.dev/eventing containing Knative Eventing sources from the desired branch. This should be checked out before running tests.

Individual tests from knative-serving and knative-eventing

There are targets for running individual tests in both Knative Serving Makefile and Knative Eventing Makefile.

Example targets that can be run from the respective repositories (these targets all requires a running OCP cluster and pre-installed Serverless):

  • make TEST=<name_of_test> BRANCH=<ci_promotion_name> test-e2e-local: Runs the given test using the latest test images that were published under the given promotion name. This doesn't require building any images manually. Example: make BRANCH=knative-v0.15.2 TEST=TestDestroyPodInflight test-e2e-local.
  • make IMAGE=<name_of_image> DOCKER_REPO_OVERRIDE=<dockerhub_registry> test-image-single: Builds an image from test/test_images/$(IMAGE) and pushes it into the Dockerhub registry. This requires ko 0.2.0 or newer.
  • make TEST=<name_of_test> DOCKER_REPO_OVERRIDE=<dockerhub_registry> test-e2e-local: Runs the given test using the previously built image.

Operator Framework

This repository contains the metadata required by the Operator Lifecycle Manager

Create a Subscription

To install the operator, create a subscription:

cat <<-EOF | oc apply -f -
apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: serverless-operator
  generateName: serverless-operator-
  namespace: openshift-operators
spec:
  source: serverless-operator
  sourceNamespace: openshift-marketplace
  name: serverless-operator
  channel: techpreview
EOF

Test upgrade from previous version

To test upgrade from previous version, deploy serverless operator by make install-previous

make install-previous

Then, you can see the installplans that the latest version has APPROVED false.

$ oc get installplan -n openshift-operators
NAME            CSV                          APPROVAL    APPROVED
install-ck6jl   serverless-operator.v1.4.1   Manual      true
install-hrzzn   serverless-operator.v1.5.0   Manual      false

For example, v1.5.0 is the latest version in this case. To upgrade v1.5.0, you can edit spec.approved to true manually.

spec:
  approval: Manual
  approved: true

After a few minutes, operators will be upgraded automatically.

Contributing

Create a new version

To create a new version of the serverless-operator (usually after a release branch has been cut), there are a few steps we have to do. These steps can be done one after the other and do not have to be sent as one PR, to avoid clogging up the respective PR.

1. Update the version metadata of the serverless-operator

The first thing we usually do is to update the version metadata of the operator. That mostly includes bumping the version to the next desired version (i.e. 1.12 -> 1.13). This is done by adjusting the respective settings in the project and olm part of project.yaml. The settings to be changed usually are project.version, olm.replaces and olm.skipRange.

Next, add the now outdated version of serverless-operator to the CatalogSource deployment in catalogsource.bash. The image to be added usually has the following format: registry.ci.openshift.org/openshift/openshift-serverless-$OLD_VERSION:serverless-bundle. Add it before the "current" image, which is image-registry.openshift-image-registry.svc:5000/$OLM_NAMESPACE/serverless-bundle.

After the changes are done, commit them and run make generated-files. All manifests will now be updated accordingly. It's encouraged to commit the generated changes separately, to ease review.

2. Update the image coordinates and installation manifests

To update the image coordinates of the component you want to bump, adjust its version in the dependencies section of project.yaml.

It should be a rare occasion, but between releases, the manifest files we want to pull might have changed. If that is the case, adjust the files downloaded in update-manifests.sh.

Likewise a rare occasion should be patches to the manifest files. update-manifests.sh might be applying patches that can be removed in the new release or have to be adjusted. Make sure to review them and act accordingly.

After the changes are done, commit them and run make generated-files. All manifests will now be updated accordingly. It's encouraged to commit the generated changes separately, to ease review.

3. Update the Golang dependencies

The repository itself depends on the respective upstream releases. The openshift-knative-operator for example is straightly build from vendoring the upstream operator and the tests heavily rely on upstream clients, APIs and helpers.

To update the dependencies, update the KN_VERSION variable in update-deps.sh. Then run ./hack/update-deps.sh --upgrade (like we do upstream) to pull in all the correct versions. It's encouraged to commit the generated changes separately, to ease review.

If we're bumping our minimum supported Openshift version, bump the OCP_VERSION variable in the same file and follow the same process.

Linting

To run the linters that CI is running, you can use make lint. You can run make fix-lint to fix as many linting warnings automatically as possible. This will for example format YAML rather than just warn about unformatted YAML.

The required linters for that are:

About

Main source repository for Openshift Serverless

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 77.3%
  • Shell 18.2%
  • JavaScript 2.0%
  • Dockerfile 1.3%
  • Makefile 1.2%