Skip to content
This repository has been archived by the owner on Jul 9, 2020. It is now read-only.

Latest commit

 

History

History
349 lines (240 loc) · 9.32 KB

HTTP requests.md

File metadata and controls

349 lines (240 loc) · 9.32 KB

List of supported HTTP requests

RepRapFirmware provides an HTTP interface for dealing with client requests. These requests are tailored for Duet Web Control in the first place but they may be used by third-party applications, too.

Every request except for rr_connect returns HTTP status code 401 if the client does not have a valid session. If no machine password is set, a user session is created whenever an arbitrary HTTP request is made. Besides, RepRapFirmware may run short on memory and may not be able to respond properly. In this case, HTTP status code 503 is returned.

In the following requests datetime strings may be used. These datetime strings are very similar to ISO8601-encoded strings but they do not contain timezone details. An example for such a string is 2019-12-13T21:27:00. Make sure to follow this format where applicable.

GET /rr_connect

Attempt to create a new connection and log in using the (optional) password.

Supported parameters:

  • password (optional): Machine password to log in with. If omitted, this defaults to reprap
  • time (optional): Current datetime that will be used to update RepRapFirmware's internal clock

Returns

{
    "err": code
}

where code may be one of the following:

  • 0: Password is valid and the client's IP address is added to the list of HTTP sessions
  • 1: Password is invalid
  • 2: No more user sessions available. This may occur when too many client devices are connected at the same time

If the password is valid, extra fields are returned:

{
    "err": 0,
    "sessionTimeout": 8000,
    "boardType": "duetwifi102"
}
  • sessionTimeout is the idle timeout in milliseconds before a client is removed again from the list of client sessions
  • boardType represents the board's type

Officially supported board types are:

boardType Board Remarks
duet06 Duet 0.6 deprecated
duet07 Duet 0.7 deprecated
duet085 Duet 0.8.5 deprecated
duetwifi10 Duet WiFi v1.0
duetwifi102 Duet WiFi v1.02
duetethernet10 Duet Ethernet v1.0
duetethernet102 Duet Ethernet v1.02
duetmaestro100 Duet Maestro v1.0
duet3mb6hc Duet 3 v0.6

GET /rr_disconnect

Disconnect again from the RepRapFirmware controller.

Returns

{
    "err": code
}

where code may be 0 if the session could be removed, else it is 1.

GET /rr_status

Retrieve a status response from RepRapFirmware in JSON format.

Supported parameters:

  • type: Type of the status response

The value of type can be one of:

  • 1: Standard status response
  • 2: Advanced status response. This also contains fields from the standard status response
  • 3: Print status response. This contains fields from the standard status response as well as information about the current (print) job

See JSON responses for further information.

Get /rr_config

Retrieve the configuration response. This request provides a JSON object with values that are expected to change rarely.

See JSON responses for further information.

GET /rr__gcode

Execute arbitrary G/M/T-code(s).

Supported parameters:

  • gcode: G/M/T-code to execute. This parameter must be present although it can be empty

Returns

{
    "buff": bufferSpace
}

where bufferSpace indicates how much buffer space for new G/M/T-codes is still available.

If a file is supposed to be streamed over the HTTP interface, call this repeatedly and transfer only as many bytes as allowed.

GET /rr_reply

Retrieve the last G-code reply. The G-code reply is buffered per connected HTTP client and it is discarded when every HTTP client has fetched it or when the firmware is short on memory and the client has not requested it within reasonable time (1 second).

The G-code reply is returned as text/plain.

GET /rr_upload

Get the last file upload result.

Returns

{
    "err": code
}

where code can be either 0 if the last upload successfully finished or 1 if an error occurred.

POST /rr_upload

Upload a file.

Supported URL parameters:

  • name: Path to the file to upload
  • time (optional): ISO8601-like represenation of the time the file was last modified
  • crc32 (optional): CRC32 checksum of the file content as hex string without leading 0x. Usage of this parameter is encouraged

The raw HTTP body contains the file content. Binary file uploads are supported as well. Make sure to set Content-Length to the length of the HTTP body if your HTTP client does not already do that.

Returns

{
    "err": code
}

where code can be either 0 if the last upload successfully finished or 1 if an error occurred (e.g. CRC mismatch).

GET /rr_download

Download a file.

Supported parameters:

  • name: Filename to download

If the file could not be found, HTTP status code 404 is returned, else the file content is sent to the client.

GET /rr_delete

Delete a file or directory.

Supported parameters:

  • name: Filename to delete

Returns

{
    "err": {code}
}

where code is either 0 on success or 1 on error.

GET /rr_filelist

Retrieve a (partial) file list.

Supported parameters:

  • dir: Directory to query
  • first (optional): First item index to return. Defaults to 0

Returns

{
    "dir": dir,
    "first": first,
    "files": [
        {
            "type": itemType,
            "name": itemName,
            "size": itemSize,
            "date": itemDate
        },
        ...
    ],
    "next": next,
    "err": code
}

where dir and first equal the query parameters. err can be one of:

  • 0: List query successful
  • 1: Drive is not mounted
  • 2: Directory does not exist

The next field may be omitted if the query was not successful and it is 0 if the query has finished. If there are more items to query, this value can be used for the first parameter of a successive rr_filelist request.

Retrieved files are returned as part of the files array. Note that date may not be present if it is invalid. Every item has the following properties:

  • itemType: Type of the file item. This is d for directories and f for files
  • itemName: Name of the file or directory
  • itemSize: Size of the file. This is always 0 for directories
  • itemDate: Datetime of the last file modification

GET /rr_files

Retrieve a list of files without any attributes.

Supported parameters:

  • dir: Directory to query
  • first (optional): First item index to return. Defaults to 0
  • flagDirs (optional): Set this to 1 to prefix directory items with *. Defaults to 0

Returns

{
    "dir": dir,
    "first": first,
    "files": [
        "file1",
        "file2",
        ...
    ],
    "next": next,
    "err": err
}

where dir and first equal the query parameters. err can be one of:

  • 0: List query successful
  • 1: Drive is not mounted
  • 2: Directory does not exist

The next field may be omitted if the query was not successful and it is 0 if the query has finished. If there are more items to query, this value can be used for the first parameter of a successive rr_files request.

GET /rr_move

Move a file or directory.

Supported parameters:

  • old: Current path to the file or directory
  • new: New path of the file or directory
  • deleteexisting (optional): Set this to yes to delete the new file if it already exists. Defaults to no

Returns

{
    "err": code
}

where code is either 0 on success or 1 on error.

GET /rr_mkdir

Create a new directory.

Supported parameters:

  • dir: Path to the new directory

Returns

{
    "err": code
|

where code is either 0 on success or 1 on error.

GET /rr_fileinfo

Parse a G-code job file and return retrieved information. If no file is specified, information about the file being printed is returned.

Supported parameters:

  • name (optional): Path to the file to parse

Returns

{
    "err": code,
    "size": size,
    "lastModified": lastModified,
    "height": height,
    "firstLayerHeight": firstLayerHeight,
    "layerHeight": layerHeight,
    "printTime": printTime,
    "simulatedTime": simulatedTime,
    "filament": filament,
    "printDuration": printDuration,
    "fileName": fileName,
    "generatedBy": generatedBy
}

where code is either 0 on success or 1 on error. If the file could not be parsed, all other fields are omitted.

Other fields are:

Field Unit Description Default value if invalid Present if name is omitted
size bytes Size of the file in bytes not applicable yes
lastModified datetime Datetime of the last file modification omitted maybe
height mm Final print height of the object 0.00 yes
firstLayerHeight mm Height of the first layer 0.00 yes
layerHeight mm Layer height 0.00 yes
printTime seconds Estimated print time omitted maybe
simulatedTime seconds Estimated print time according to the last simulation omitted maybe
filament array of mm Total filament consumption per extruder empty array yes
printDuration seconds Total print time so far not applicable no
fileName file path Absolute path to the file being printed not applicable no
generatedBy text Slicer or toolchain which generated this file empty string yes