Contributing to the content of MDN Web Docs

🎉 First of all, thanks for taking the time to contribute to MDN Web Docs! 🎉

The following is a set of guidelines for contributing to the content of MDN Web Docs, which is hosted within the MDN Organization on GitHub.

Note: Just want to find a task and jump in? See Getting started on MDN for an overview of how to join, and Contributing to MDN for a filtered list of tasks.

Code of Conduct

Everyone participating in this project is expected to follow our Code of Conduct.

License

When contributing to the content you agree to license your contributions according to our license.

Making contributions

A good place to learn about general guidelines for contributing to MDN Web Docs is the Guidelines document. For example, you can find out more about MDN's writing-style guidelines via the Writing style guide.

Prerequisite knowledge

We expect contributors to MDN to have a certain amount of prerequisite knowledge before they start working on the content. If you are new to the following topics, we'd advise you to look at the provided links to help you get up to speed:

Web technologies: If you are new to HTML, CSS, JavaScript, etc., check out our Learn web development tutorials.
Open source: If you've never contributed to an open source project before, have a read of Basic etiquette for open source projects.
Git and GitHub: If you are unfamiliar with these tools, GitHub for complete beginners will get you started.
MDN's repo structures: If you are not sure what repos to edit to make changes to the different parts of MDN's content, Where is everything on MDN? will point you towards the correct places.

Setup

No matter how you wish to contribute, you'll need a GitHub account if you don't have one already. If you're not familiar with git and GitHub, you might find the MDN Git and GitHub document helpful.

There are several ways forward from this point. It's up to you. Here are some options:

Go to https://github.com/mdn/content and just use the GitHub UI. This is the easiest approach if you just want to make a simple change to a single file, like fixing a typo.
Install and use the GitHub Desktop
Install and use the GitHub CLI
Install git and use it from the command line. You might find these resources helpful:
- Using Git
- git cheatsheet

If you choose an option other than the GitHub UI, you want to install Node.js (version >=12.11) and yarn.

Fundamental concepts

These are some important things to keep in mind about the MDN content.

A document's main content is written in an index.html or an index.md file -- We're currently in the process of converting our content from HTML into Markdown. Pages that are in HTML have their content in a file called "index.html". Pages that are in Markdown have their content in a file called "index.md".
Documents are folders -- Documents are always represented by a folder (e.g., files/en-us/web/javascript), and that folder will contain the content of that specific document as an index.html or index.md file (e.g., files/en-us/web/javascript/index.md).
Documents are hierarchical - A document folder may contain other folders, where those folders would represent child documents (e.g., files/en-us/web/javascript/closures/index.md).
Document folders may contain image files -- A document folder may also contain image files, which are referenced within that document's index.html or index.md file.
All redirects are specified in a single file -- All of the redirects are specified within files/en-us/_redirects.txt, one redirect per line. Each line specifies a from and to URI separated by whitespace. When you move a document, you'll need to add a redirect to this file specifying that its old URI now redirects to its new URI. Both of these tasks are done using the yarn content move tool — see Moving one or more documents.
Don't edit the _redirects.txt file manually! If both an index.html or index.md file and a redirect exist for a document, the document takes precedence and the redirect is ignored.
A document's index.html or index.md starts with "front-matter" -- Each document's index.html or index.md file must begin with some YAML called front-matter that defines some important information about the document: title, slug, and tags (if any). Here's an example that shows the front-matter from the JavaScript landing page:
```
---
title: JavaScript
slug: Web/JavaScript
tags:
  - JavaScript
  - Landing
  - Landing page
  - Learn
  - 'l10n:priority'
---
```

Simple changes

If you just want to make a simple change to a single file, like fixing a typo, the GitHub UI is the simplest way to do that. For example, if you've found a typo within the JavaScript landing page, you can sign into GitHub, go to https://github.com/mdn/content, navigate to the source file files/en-us/web/javascript/index.md, and then click on the edit (pencil) button.

Tip: Click the Source on GitHub link in the footer of any MDN page to jump to its source file on GitHub.

From there the GitHub UI will take your hand and walk you through the rest, like automatically creating a fork and branch to commit your changes to, as well as helping you reach the ultimate goal, a pull request. Your pull request represents the work you want to be reviewed, hopefully approved, and then merged into the main branch of this repository.

Note: See the pull request etiquette section for more details on creating and handling pull requests successfully.

If you're not certain of the changes that you want to make, get in touch with us first! You can chat with us or file an issue.

You may be asked to further edit files in your pull request. To open a file for editing, select the Files changed tab on the PR, scroll down to the section for the file you want to edit, and then select the "three dots" icon (at the top right of the section). Choose Edit file from the popup menu to start editing the file. After editing, your changes will result in a new commit.

More substantial changes

If you need to do some work that requires changes to more than one file, like moving one or more documents, the GitHub UI is not very efficient. You'd have to make a separate pull request for every page you want to change. Instead, you're going to have to use git or one of the other git-based approaches like the GitHub Desktop.

You'll want to create a fork of this repository, so you can freely experiment with branches and changes in your own copy before submitting your changes as a pull request. Let's assume your GitHub username is octocat. Your fork would be a copy of this repository but in your own account, so https://github.com/octocat/content.
Once you've created your fork on GitHub, you'll want to clone it locally. For example, assuming again that your GitHub username is octocat, you would do something like the following:
```
cd ~/repos
git clone [email protected]:octocat/content.git mdn/content
```
You'll also want to create a remote to the main repository (https://github.com/mdn/content), which you'll use to keep your local clone as well as your fork (https://github.com/octocat/content) up-to-date. For these examples, we'll name it mdn, but you can name it anything you'd like.
```
cd ~/repos/mdn/content
git remote add mdn [email protected]:mdn/content.git
git remote -v
```
When you run the git remote -v command above, you'll see that you have two remotes: mdn and origin. The origin remote is the default name that git has assigned to your fork (https://github.com/octocat/content).
Once you've created your local clone, there's no need to do that again next time you want to make a contribution. However, each time before you start a new chunk of work make sure you update your local clone. The following checks-out your local clone's main branch, fetches the latest content from the main branch of the mdn repository and merges it into your local main branch, and finally checks out a new branch called my-work (you can call it anything you'd like) for you to work within. When you're ready, you'll push your my-work branch to your fork and use it to make a pull request.
```
cd ~/repos/mdn/content
git checkout main
git pull mdn main
git checkout -b my-work
```
Next, you'll want to start the local preview service, so you can see the changes you'll make as they would look in production. Once started, this local preview service is available at http://localhost:5042/ within your browser.
```
# Switch to a separate terminal.
cd ~/repos/mdn/content
yarn
yarn start
```
When browsing a page locally, you can press the Open in your editor button to edit the associated index.html or index.md file.

To specify VS Code as your preferred editor, create a file named .env in the root of your local content directory that contains the following line:
```
EDITOR=code
```
You can create the file from a terminal using bash or PowerShell with the command echo 'EDITOR=code' >> .env.

EDITOR is an environment variable. You can set it to any editor you like using the normal mechanism for your operating system/shell (i.e. you don't have to use the .env file or VS Code).
Make your desired changes to one or more index.html or index.md files using your preferred code editor. When thinking about your desired changes, it's important to keep the following in mind:
- Make sure you've read the MDN guidelines, including the Writing style guide.
- If you're editing a Markdown file, see the guide to writing Markdown for MDN.
- Large chunks of work can be difficult to review, so try to group your changes into the smallest logical chunks that make sense, and create a separate pull request for each logical chunk.
Once you've made and saved your changes, open a browser, and navigate to the page(s) you've changed. For example, if you changed files/en-us/web/javascript/index.md, open http://localhost:5042/en-us/docs/web/javascript in your browser.
You might have noticed that at the top of each page that you preview, for example the http://localhost:5042/en-us/docs/web/javascript page, there is a Show flaws button. Click on that button to see if your changes have introduced flaws on the page. You can also fix flaws on a particular page by running the command:
```
yarn content flaws <slug>
```
Once you're happy with your changes, add and commit them to your branch, and then push the branch to your fork. Remember, the default name that git assigned to the remote that represents your fork is origin.
```
cd ~/repos/mdn/content
git add .
git commit
git push -u origin my-work
```
You're now ready to create a pull request.
Once you've created your pull request, sit back, relax, and wait for a review. You do not need to request a review. One or more reviewers will be selected for you automatically. Your pull request will have to be reviewed and eventually approved before it's merged into the main branch, and then later (within 48 hours) published on MDN Web Docs. Along the way, you may be asked, not only to answer questions about your work, but to make changes as well. Don't worry, that's a common and natural part of the process. See the pull request etiquette section for more details on creating and handling pull requests successfully.

Pull request etiquette

Here are some important rules of etiquette to remember when working with pull requests.

When you submit a pull request, a number of tests are automatically run as GitHub Actions (see .github/workflows). If one or more of these tests fail, it is your responsibility to try and resolve the underlying issue(s). If you don't know how to resolve the underlying issue(s), you can ask for help. Your pull request will not be approved and merged if these tests are failing.
If your pull request has merge conflicts with the main branch (GitHub checks for this automatically and notifies you), you are responsible for resolving them. You can do this by merging the main branch into your branch (git pull mdn main), and then pushing the updated branch to your fork (git push).
An alternative strategy is git rebase of main on your branch. This will rewrite the git history and might confuse reviewers as notifications from GitHub lead to nowhere. Your changes are replayed on top of the current main branch at that point in time.
Each pull request should contain a single logical change, or related set of changes that make sense to submit together. If a pull request becomes too large or contains too many unrelated changes, it becomes too difficult to review, and may begin to look suspicious (it is easier to hide malicious changes in a large pull request). In such cases, the reviewer has the right to close your pull request, and ask that you submit a separate pull request for each logical set of changes that belong together.
If your pull request contains any kind of significant complexity (it contains technical changes, and isn't just a typo fix, grammatical improvement, or formatting/structural change), please describe why you're making the change and anything else we need to know about it.
- If the pull request is simple (it is really clear what has been changed and why, and the change is obviously a good thing), you can do this in your pull request's description.
- If the pull request is complex (the changes and the reasoning behind them need a bit more explanation), then the requestor should file an issue describing the intended change first, and seek discussion/approval as needed. When the time is right to submit the PR, they should reference the issue (or an existing issue that describes the motivation for the change) in the PR. You can reference an existing issue using # followed by the issue's ID, for example #1234.
- Pull requests should not contain large amounts of grammar updates. Seemingly insignificant changes can change the meaning of technical content, so these need a careful review. Keep in mind that MDN contains technical documentation; you should not report merely basic improvements in the grammar but only cases where the grammar is incorrect.
Do not re-open a pull request that a reviewer has closed.

Adding a new document

Adding a new document is relatively straightforward, especially if you can start by copying the index.html or index.md of a similar document. There are only a few things to keep in mind:

Documents can be authored in either Markdown or HTML. However, we're converting the site to Markdown one section at a time, and don't want to mix authoring formats within a section. At this point we have only converted the JavaScript documentation. So if you are adding a new document under files/en-us/web/javascript, make it a Markdown file. Otherwise make it an HTML file.
Remember that a document is represented by an index.html or index.md file within its own folder.
Determine where in the document hierarchy your document belongs. For example, if you're creating a new CSS document for a new property foo, you'll want to create a new folder files/en-us/web/css/foo/ and its files/en-us/web/css/foo/index.html file.
Remember that a document's index.html or index.md file must start with front-matter that defines the title, slug, and tags (if any) for the document. You might find it helpful to refer to the front-matter within a similar document's index.html or index.md.

As we outlined above, the step-by-step process in general would be:

Start a fresh, up-to-date branch to work within:

cd ~/repos/mdn/content
git checkout main
git pull mdn main
# Run "yarn" again just to ensure you've
# installed the latest Yari dependency.
yarn
git checkout -b my-add

Create one or more new document folders, each with their own index.html or index.md file.
Add and commit your new files, as well as push your new branch to your fork:
```
git add files/en-us/folder/you/created
git commit
git push -u origin my-add
```
And finally create your pull request.

Moving one or more documents

Moving one or more documents, or an entire tree of documents is easy, because we've created a special command that takes care of the details for you:

yarn content move <from-slug> <to-slug> [locale]

You just have to specify the slug of the existing document that you'd like to move (e.g., Learn/Accessibility), as well as the slug of its new location (e.g., Learn/A11y), optionally followed by the locale of the existing document (defaults to en-US). If the existing document that you'd like to move has child documents (i.e. it represents a document tree), the yarn content move command will move the entire tree. For example, let's say you want to move the entire /en-US/Learn/Accessibility tree to /en-US/Learn/A11y:

First, as we've outlined above, you'll start a fresh branch to work within:

cd ~/repos/mdn/content
git checkout main
git pull mdn main
# Run "yarn" again just to ensure you've
# installed the latest Yari dependency.
yarn
git checkout -b my-move

Perform the move (which will delete and modify existing files, as well as create new files):
```
yarn content move Learn/Accessibility Learn/A11y
```
Add and commit all of the deleted, created, and modified files, as well as push your branch to your fork:
```
git commit -a
git push -u origin my-move
```
Now you're ready to create your pull request.

Important: yarn content move automatically adds the necessary redirect information to the _redirects.txt file so that the old location will redirect to the new one. Don't edit the _redirects.txt file manually! mistakes can easily creep in if you do. If you need to add a redirect without moving a file, talk to us about it.

Deleting a document

Deleting one or more documents, or an entire tree of documents is also easy, again because we've created a special command that takes care of the details for you:

yarn content delete <document-slug> [locale]

You just have to specify the slug of the existing document that you'd like to delete (e.g., Learn/Accessibility), optionally followed by the locale of the existing document (defaults to en-US). If the existing document that you'd like to delete has child documents (i.e. it represents a document tree), you must also specify the -r, --recursive option, or the command will fail.

Important: you need to use the delete command to delete MDN documents. Don't just delete their directories from the repo, as delete also handles other necessary changes such as updating the _wikihistory.json file.

For example, let's say you want to delete the entire /en-US/Learn/Accessibility tree:

First, as we've outlined above, you'll start a fresh branch to work in:

cd ~/repos/mdn/content
git checkout main
git pull mdn main
# Run "yarn" again just to ensure you've
# installed the latest Yari dependency.
yarn
git checkout -b my-delete

Perform the delete:

yarn content delete Learn/Accessibility --recursive

Add a redirect (if needed).
Add and commit all of the deleted files, as well as push your branch to your fork:
```
git commit -a
git push -u origin my-delete
```
Now you're ready to create your pull request.

Note: If the slug of the page you wish to delete contain special characters, include it in quotes:

yarn content delete "Mozilla/Add-ons/WebExtensions/Debugging_(before_Firefox_50)"

Redirecting a document

If you are moving a document as shown above you don't need to create a redirect. However, you may need to when deleting a document or otherwise fixing up a broken link.

The best way to do this is to use the yarn content add-redirect command:

Start a fresh branch to work in:

cd ~/repos/mdn/content
git checkout main
git pull mdn main
# Run "yarn" again just to ensure you've
# installed the latest Yari dependency.
yarn
git checkout -b my-delete

Perform the redirect:
```
yarn content add-redirect /en-US/path/of/deleted/page /en-US/path/of/target/page
```
Note that the target page can be an external URL or another page.
Commit all of the changed files, as well as pushing your branch to your fork:
```
git commit -a
git push -u origin my-delete
```

Adding images

Adding an image to a document is easy as well. All you need to do is add your image file within the document's folder, and then reference the image from within the document's index.html or index.md file, using an <img> or the equivalent Markdown syntax. It's as easy as that. Let's walk through an example:

You should be getting used to this by now, as we've done it several times above. Make sure you start with a fresh working branch updated with the latest content from the main branch of the mdn remote.
```
cd ~/repos/mdn/content
git checkout main
git pull mdn main
# Run "yarn" again just to ensure you've
# installed the latest Yari dependency.
yarn
git checkout -b my-images
```
Add your image to the document folder. For this example, let's assume we're adding a new image to the files/en-us/web/css document.
```
cd ~/repos/mdn/content
cp /some/path/my-cool-image.png files/en-us/web/css/
```
Run the filecheck command on each image you add. It'll complain if something's wrong (see also the Compressing images section below). We'll automatically run this as one of the tests we run when your new pull request is created, but why wait to fix any possible issues later?
```
yarn filecheck files/en-us/web/css/my-cool-image.png
```
Use your image within the document. For example, add the following <img> element somewhere inside files/en-us/web/css/index.html:
```
<img src="my-cool-image.png" alt="My cool image">
```

Add and commit all of the deleted, created, and modified files, as well as push your branch to your fork:

git add files/en-us/web/css/my-cool-image.png files/en-us/web/css/index.html
git commit
git push -u origin my-images

Now you're ready to create your pull request.

Compressing images

When you add images to MDN, you should make sure that they are compressed as much as possible without degrading quality, to save on download size for our readers. In fact, if you don't do this our CI process will fail and the build results will warn you that some of your images are too big.

The best way to compress them is by using the built-in compression tool. You can compress an image appropriately by using the filecheck command with the --save-compression option — this compresses the specified image as much as possible, and saves the result over the top of the original.

For example:

yarn filecheck files/en-us/web/css/my-cool-image.png --save-compression

Learn more

You can learn more about contributing to MDN on the MDN Web Docs for Contributors site.

Name		Name	Last commit message	Last commit date
Latest commit History 8,210 Commits
.github		.github
files		files
meta		meta
rfcs		rfcs
scripts		scripts
.editorconfig		.editorconfig
.gitattributes		.gitattributes
.gitignore		.gitignore
.gitmodules		.gitmodules
.markdownlint.json		.markdownlint.json
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
LICENSE.md		LICENSE.md
README.md		README.md
REVIEWING.md		REVIEWING.md
netlify.toml		netlify.toml
package.json		package.json
yarn.lock		yarn.lock

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Contributing to the content of MDN Web Docs

Code of Conduct

License

Making contributions

Prerequisite knowledge

Setup

Fundamental concepts

Simple changes

More substantial changes

Pull request etiquette

Adding a new document

Moving one or more documents

Deleting a document

Redirecting a document

Adding images

Compressing images

Learn more

About

Releases

Packages

Languages

License

sahil48/content

Folders and files

Latest commit

History

Repository files navigation

Contributing to the content of MDN Web Docs

Code of Conduct

License

Making contributions

Prerequisite knowledge

Setup

Fundamental concepts

Simple changes

More substantial changes

Pull request etiquette

Adding a new document

Moving one or more documents

Deleting a document

Redirecting a document

Adding images

Compressing images

Learn more

About

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages