Text format CAN traces preferred. Please name files according to scenarios - each scenario separate file name.
For inspiration look at https://github.com/rusefi/rusefi_documentation/tree/master/OEM-Docs/CanAm/maverick-x3-xrs-turbo-rr-max-2021 and https://github.com/rusefi/rusefi_documentation/tree/master/OEM-Docs/CanAm/maverick-x3-xrs-turbo-rr-max-2021-day-2
Start trace recording, turn ignition key/wake up car, turn key off, record until CAN traffic stops or 30 seconds whatever happens first. Stop trace recording.
Ignition key ON, engine OFF. Tap and hold breaks five times.
Same as above, just use headlight switch instead of brake pedal
Ignition key ON, engine OFF. Hook up battery charger to change voltage.
Ignition key ON, engine OFF. Add fuel, name file according to before and after fuel amount.
Ignition key ON, engine OFF. Press pedal all the way down fast, complexly release fast, press all way down slowly, complexly release slowly, repeat from start two more times.
Open hood, unhook TPS sensor plug. Repeat "TPS/PPS sweep"
Record 30 seconds of vehicle idling
Idle, Unplug and plug coolant sensor if easy to reach
Start cold-ish engine, warm up engine.
Raise car, turn wheels manually while ignition ON or idle.
Idle, Turn A/C on and off a few times
Press brake pedal, engage R, engage D, engage R, engage D, engage R, engage D.
Rev engine slowly to 3000 RPM, rev engine quickly, rev engine slowly to 3000 RPM, rev engine quickly.
If you have "1" selector accelerate to 20 mph/32kmh and drive for hundred meters.
If you have "2" selector accelerate to 20 mph/32kmh and drive for hundred meters.
If you have "3" selector accelerate to 20 mph/32kmh and drive for hundred meters.