Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fix ACPI Build Error #139

Open
wants to merge 1 commit into
base: release-4.4
Choose a base branch
from
Open

Fix ACPI Build Error #139

wants to merge 1 commit into from

Conversation

mrfixit2001
Copy link

Resolution to Issue #89.
#89

@mrfixit2001
Fix ACPI Build Error
c83f272 
Resolution to Issue #89.
#89
@mrfixit2001
Copy link
Author

Note, this is part 1. It gets the compiler past this error but there's another problem that also needs to be fixed in part 2. #140

@mrfixit2001 mrfixit2001 mentioned this pull request Jan 7, 2019
Open
@keveryang
Copy link
Member

How can we reproduce the issue you met? eg. which defconfig/compiler do you use?

@mrfixit2001
Copy link
Author

Simply setting CONFIG_ACPI=y results in build errors

0lvin pushed a commit to free-z4u/roc-rk3328-cc-official that referenced this pull request Oct 5, 2019
@borkmann @davem330
tls: fix NULL pointer dereference on poll
f6fadff 
While hacking on kTLS, I ran into the following panic from an
unprivileged netserver / netperf TCP session:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  PGD 800000037f378067 P4D 800000037f378067 PUD 3c0e61067 PMD 0
  Oops: 0010 [FireflyTeam#1] SMP KASAN PTI
  CPU: 1 PID: 2289 Comm: netserver Not tainted 4.17.0+ rockchip-linux#139
  Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
  RIP: 0010:          (null)
  Code: Bad RIP value.
  RSP: 0018:ffff88036abcf740 EFLAGS: 00010246
  RAX: dffffc0000000000 RBX: ffff88036f5f6800 RCX: 1ffff1006debed26
  RDX: ffff88036abcf920 RSI: ffff8803cb1a4f00 RDI: ffff8803c258c280
  RBP: ffff8803c258c280 R08: ffff8803c258c280 R09: ffffed006f559d48
  R10: ffff88037aacea43 R11: ffffed006f559d49 R12: ffff8803c258c280
  R13: ffff8803cb1a4f20 R14: 00000000000000db R15: ffffffffc168a350
  FS:  00007f7e631f4700(0000) GS:ffff8803d1c80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffffffffffd6 CR3: 00000003ccf64005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? tls_sw_poll+0xa4/0x160 [tls]
   ? sock_poll+0x20a/0x680
   ? do_select+0x77b/0x11a0
   ? poll_schedule_timeout.constprop.12+0x130/0x130
   ? pick_link+0xb00/0xb00
   ? read_word_at_a_time+0x13/0x20
   ? vfs_poll+0x270/0x270
   ? deref_stack_reg+0xad/0xe0
   ? __read_once_size_nocheck.constprop.6+0x10/0x10
  [...]

Debugging further, it turns out that calling into ctx->sk_poll() is
invalid since sk_poll itself is NULL which was saved from the original
TCP socket in order for tls_sw_poll() to invoke it.

Looks like the recent conversion from poll to poll_mask callback started
in 1525242 ("net: add support for ->poll_mask in proto_ops") missed
to eventually convert kTLS, too: TCP's ->poll was converted over to the
->poll_mask in commit 2c7d3da ("net/tcp: convert to ->poll_mask")
and therefore kTLS wrongly saved the ->poll old one which is now NULL.

Convert kTLS over to use ->poll_mask instead. Also instead of POLLIN |
POLLRDNORM use the proper EPOLLIN | EPOLLRDNORM bits as the case in
tcp_poll_mask() as well that is mangled here.

Fixes: 2c7d3da ("net/tcp: convert to ->poll_mask")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Watson <[email protected]>
Tested-by: Dave Watson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
fanck0605 pushed a commit to fanck0605/friendlywrt-kernel that referenced this pull request Apr 27, 2020
@gregkh
KVM: x86: Allocate new rmap and large page tracking when moving memslot
bcd1d74 
commit edd4fa3 upstream.

Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot.  The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.

Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap.  KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...

  general protection fault: 0000 [friendlyarm#1] SMP
  CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ rockchip-linux#139
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
  Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
  RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246
  RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012
  RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570
  RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8
  R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000
  R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8
  FS:  00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0
  Call Trace:
   kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
   __kvm_set_memory_region.part.64+0x559/0x960 [kvm]
   kvm_set_memory_region+0x45/0x60 [kvm]
   kvm_vm_ioctl+0x30f/0x920 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f7ed9911f47
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47
  RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004
  RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700
  R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000
  R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000
  Modules linked in: kvm_intel kvm irqbypass
  ---[ end trace 0c5f570b3358ca89 ]---

The disallow_lpage tracking is more subtle.  Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.

Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().

Fixes: 05da455 ("KVM: MMU: large page support")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
scpcom pushed a commit to scpcom/linux that referenced this pull request May 8, 2020
@gregkh
KVM: x86: Allocate new rmap and large page tracking when moving memslot
38e4198 
commit edd4fa3 upstream.

Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot.  The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.

Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap.  KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...

  general protection fault: 0000 [#1] SMP
  CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ rockchip-linux#139
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
  Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
  RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246
  RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012
  RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570
  RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8
  R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000
  R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8
  FS:  00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0
  Call Trace:
   kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
   __kvm_set_memory_region.part.64+0x559/0x960 [kvm]
   kvm_set_memory_region+0x45/0x60 [kvm]
   kvm_vm_ioctl+0x30f/0x920 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f7ed9911f47
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47
  RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004
  RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700
  R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000
  R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000
  Modules linked in: kvm_intel kvm irqbypass
  ---[ end trace 0c5f570b3358ca89 ]---

The disallow_lpage tracking is more subtle.  Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.

Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().

Fixes: 05da455 ("KVM: MMU: large page support")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
fanck0605 pushed a commit to fanck0605/friendlywrt-kernel that referenced this pull request May 21, 2020
@suryasaimadhu @gregkh
x86: Fix early boot crash on gcc-10, third try
91b9ce0 
commit a9a3ed1 upstream.

... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.

The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:

  Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 rockchip-linux#139
  Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
  Call Trace:
    dump_stack
    panic
    ? start_secondary
    __stack_chk_fail
    start_secondary
    secondary_startup_64
  -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary

This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.

To fix that, the initial attempt was to mark the one function which
generates the stack canary with:

  __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)

however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.

The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.

The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").

This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.

That should hold for a long time, but hey we said that about the other
two solutions too so...

Reported-by: Sergei Trofimovich <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Kalle Valo <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
paralin pushed a commit to paralin/linux that referenced this pull request Dec 31, 2021
@mrfixit2001 @paralin
fix acpi build error
2f8fbc2 
See: rockchip-linux/kernel#139
scpcom pushed a commit to scpcom/linux that referenced this pull request Mar 21, 2023
@JYeoWoo @gregkh
wifi: mt7601u: fix an integer underflow
47dc1f4 
[ Upstream commit 803f317 ]

Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.

Ensure that 'dma_len' is greater than 'min_seg_len'.

Found by a modified version of syzkaller.

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G        W  O      5.14.0+
rockchip-linux#139
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS:  0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 mt7601u_rx_tasklet+0xc73/0x1270
 ? mt7601u_submit_rx_buf.isra.0+0x510/0x510
 ? tasklet_action_common.isra.0+0x79/0x2f0
 tasklet_action_common.isra.0+0x206/0x2f0
 __do_softirq+0x1b5/0x880
 ? tasklet_unlock+0x30/0x30
 run_ksoftirqd+0x26/0x50
 smpboot_thread_fn+0x34f/0x7d0
 ? smpboot_register_percpu_thread+0x370/0x370
 kthread+0x3a1/0x480
 ? set_kthread_struct+0x120/0x120
 ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 57f34f93b4da0f9b ]---
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS:  0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554

Signed-off-by: Jisoo Jang <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
scpcom pushed a commit to scpcom/linux that referenced this pull request Mar 21, 2023
@JYeoWoo @gregkh
wifi: mt7601u: fix an integer underflow
1a1f430 
[ Upstream commit 803f317 ]

Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.

Ensure that 'dma_len' is greater than 'min_seg_len'.

Found by a modified version of syzkaller.

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G        W  O      5.14.0+
rockchip-linux#139
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS:  0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 mt7601u_rx_tasklet+0xc73/0x1270
 ? mt7601u_submit_rx_buf.isra.0+0x510/0x510
 ? tasklet_action_common.isra.0+0x79/0x2f0
 tasklet_action_common.isra.0+0x206/0x2f0
 __do_softirq+0x1b5/0x880
 ? tasklet_unlock+0x30/0x30
 run_ksoftirqd+0x26/0x50
 smpboot_thread_fn+0x34f/0x7d0
 ? smpboot_register_percpu_thread+0x370/0x370
 kthread+0x3a1/0x480
 ? set_kthread_struct+0x120/0x120
 ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 57f34f93b4da0f9b ]---
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS:  0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554

Signed-off-by: Jisoo Jang <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Kwiboo pushed a commit to Kwiboo/linux-rockchip that referenced this pull request Jul 29, 2023
@riteshharjani @gregkh
ext2/dax: Fix ext2_setsize when len is page aligned
5cee8bf 
commit fcced95 upstream.

PAGE_ALIGN(x) macro gives the next highest value which is multiple of
pagesize. But if x is already page aligned then it simply returns x.
So, if x passed is 0 in dax_zero_range() function, that means the
length gets passed as 0 to ->iomap_begin().

In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on
here in ext2_get_blocks().
	BUG_ON(maxblocks == 0);

Instead we should be calling dax_truncate_page() here which takes
care of it. i.e. it only calls dax_zero_range if the offset is not
page/block aligned.

This can be easily triggered with following on fsdax mounted pmem
device.

dd if=/dev/zero of=file count=1 bs=512
truncate -s 0 file

[79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff)
[93.793207] ------------[ cut here ]------------
[93.795102] kernel BUG at fs/ext2/inode.c:637!
[93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 rockchip-linux#139
[93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610
<...>
[93.835298] Call Trace:
[93.836253]  <TASK>
[93.837103]  ? lock_acquire+0xf8/0x110
[93.838479]  ? d_lookup+0x69/0xd0
[93.839779]  ext2_iomap_begin+0xa7/0x1c0
[93.841154]  iomap_iter+0xc7/0x150
[93.842425]  dax_zero_range+0x6e/0xa0
[93.843813]  ext2_setsize+0x176/0x1b0
[93.845164]  ext2_setattr+0x151/0x200
[93.846467]  notify_change+0x341/0x4e0
[93.847805]  ? lock_acquire+0xf8/0x110
[93.849143]  ? do_truncate+0x74/0xe0
[93.850452]  ? do_truncate+0x84/0xe0
[93.851739]  do_truncate+0x84/0xe0
[93.852974]  do_sys_ftruncate+0x2b4/0x2f0
[93.854404]  do_syscall_64+0x3f/0x90
[93.855789]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

CC: [email protected]
Fixes: 2aa3048 ("iomap: switch iomap_zero_range to use iomap_iter")
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Ritesh Harjani (IBM) <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Message-Id: <046a58317f29d9603d1068b2bbae47c2332c17ae.1682069716.git.ritesh.list@gmail.com>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Joshua-Riek pushed a commit to Joshua-Riek/rockchip-kernel that referenced this pull request Oct 31, 2023
@rkhuangtao
media: rockchip: vicap: fixes warning of clk disable when dev suspend
2c17810 
iclk_csihost1 already disabled
WARNING: CPU: 1 PID: 1977 at drivers/clk/clk.c:1040 clk_core_disable+0x88/0x220
Modules linked in: bcmdhd r8168
CPU: 1 PID: 1977 Comm: binder:315_4 Not tainted 6.1.25 rockchip-linux#139
Hardware name: Rockchip RK3588 EVB1 LP4 V10 Board (DT)
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_core_disable+0x88/0x220
lr : clk_core_disable+0x88/0x220
sp : ffffffc01221b9a0
x29: ffffffc01221b9a0 x28: ffffff8102014d28 x27: 0000000000000000
x26: ffffff8102014c10 x25: ffffffc00a22b000 x24: ffffffc00a171000
x23: ffffff814e3e5c80 x22: ffffffc00a222000 x21: ffffffc00a222000
x20: ffffff810024fe00 x19: ffffff810024fe00 x18: ffffffc00add90b0
x17: 0000000000000013 x16: ffffffffffffffff x15: 0000000000000004
x14: ffffffc009dbdf18 x13: 0000000000003fff x12: 0000000000000003
x11: 00000000ffffbfff x10: c0000000ffffbfff x9 : e683b01efecc8800
x8 : e683b01efecc8800 x7 : 205b5d3835343931 x6 : 342e39322020205b
x5 : ffffffc00a1f37c7 x4 : ffffffc01221b6d7 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffffffc01221b740 x0 : 000000000000001e
Call trace:
 clk_core_disable+0x88/0x220
 clk_core_disable_lock+0x9c/0x130
 clk_disable+0x20/0x2c
 rkcif_sleep_suspend+0x3c/0x6c

Fixes: af37f21 ("media: rockchip: vicap fixes suspend/resume")
Signed-off-by: Zefa Chen <[email protected]>
Change-Id: I49f7adf948c9049ec6ad8fea8f8089e991e39b91
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
2 participants
@mrfixit2001 @keveryang