spike-openocd-tests.yml

# Build Spike and run a couple of debug tests.

name: Test OpenOCD against 2 spike configurations

env:
  SPIKE_REPO: https://github.com/riscv-software-src/riscv-isa-sim.git
  SPIKE_REV: master
  RISCV_TESTS_REPO: https://github.com/riscv-software-src/riscv-tests.git
  RISCV_TESTS_REV: master
  OPENOCD_REPO: https://github.com/riscv/riscv-openocd.git
  OPENOCD_REV: riscv
  TOOLCHAIN_URL: https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v12.2.0-1/xpack-riscv-none-elf-gcc-12.2.0-1-linux-x64.tar.gz

on:
  # Run on merges to master to populate the cache with entities that are
  # accessible by every pull request.
  push:
    branches:
      - riscv
    paths:
    - 'debug/**'
    - '.github/workflows/spike-openocd-tests.yml'
  pull_request:
    types: [synchronize, opened, reopened]
    paths:
    - 'debug/**'
    - '.github/workflows/spike-openocd-tests.yml'

# There is some commented out code below that would be useful in adding this
# workflow to other repos. Ideally we can come up with something that would
# leave this file almost identical between repos, so they can all easily run
# this test suite.

jobs:
  test:
    name: Test debug (Ubuntu)
    runs-on: ubuntu-20.04
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive

      - name: Install packages
        run: |
          sudo apt-get update
          sudo apt-get install -y device-tree-compiler build-essential

      - name: Get revisions of dependencies
        run: |
          SPIKE_COMMIT=$( git ls-remote "$SPIKE_REPO" $SPIKE_REV | awk '{ print $1; }' )
          OPENOCD_COMMIT=$( git ls-remote "$OPENOCD_REPO" $OPENOCD_REV | awk '{ print $1; }' )
          echo "Revison of Spike: $SPIKE_COMMIT"
          echo "Revision of OpenOCD: $OPENOCD_COMMIT"
          # Save for later use
          echo "SPIKE_COMMIT=$SPIKE_COMMIT" >> $GITHUB_ENV
          echo "OPENOCD_COMMIT=$OPENOCD_COMMIT" >> $GITHUB_ENV

      - name: Get the toolchain from cache (if available)
        id: cache-restore-toolchain
        uses: actions/cache/restore@v3
        with:
          path: /opt/riscv/toolchain
          key: "toolchain-${{env.TOOLCHAIN_URL}}"

      - if: ${{ steps.cache-restore-toolchain.outputs.cache-hit != 'true' }}
        name: Download Toolchain (if not cached)
        run: |
          mkdir -p /opt/riscv/toolchain
          wget --progress=dot:giga $TOOLCHAIN_URL -O /tmp/toolchain.tar.gz

      - if: ${{ steps.cache-restore-toolchain.outputs.cache-hit != 'true' }}
        name: Install Toolchain (if not cached)
        run: tar zxf /tmp/toolchain.tar.gz --strip-components=1 -C /opt/riscv/toolchain

      - name: Save the toolchain to the cache (if necessary)
        id: cache-save-toolchain
        uses: actions/cache/save@v3
        with:
          path: /opt/riscv/toolchain
          key: "toolchain-${{env.TOOLCHAIN_URL}}"

      - name: Get OpenOCD from cache (if available)
        id: cache-restore-openocd
        uses: actions/cache/restore@v3
        with:
          path: /opt/riscv/openocd
          key: "openocd-${{env.OPENOCD_COMMIT}}"

      - if: ${{ steps.cache-restore-openocd.outputs.cache-hit != 'true' }}
        name: Download OpenOCD source (if not cached)
        run: |
          git clone "$OPENOCD_REPO"
          cd riscv-openocd
          git checkout "$OPENOCD_COMMIT"
          git submodule update --init --recursive

      - if: ${{ steps.cache-restore-openocd.outputs.cache-hit != 'true' }}
        name: Build OpenOCD (if not cached)
        run: |
          cd riscv-openocd
          ./bootstrap
          ./configure --prefix=/opt/riscv/openocd
          make -j"$(nproc 2> /dev/null || sysctl -n hw.ncpu)"
          make install

      - if: ${{ steps.cache-restore-openocd.outputs.cache-hit != 'true' }}
        name: Save OpenOCD to cache (if built)
        id: cache-save-openocd
        uses: actions/cache/save@v3
        with:
          path: /opt/riscv/openocd
          key: "openocd-${{env.OPENOCD_COMMIT}}"

      - name: Get spike from cache (if available)
        id: cache-restore-spike
        uses: actions/cache/restore@v3
        with:
          path: /opt/riscv/spike
          key: "spike-${{env.SPIKE_COMMIT}}"

      - if: ${{ steps.cache-restore-spike.outputs.cache-hit != 'true' }}
        name: Download Spike source (if not cached)
        run: |
          git clone "$SPIKE_REPO"
          cd riscv-isa-sim
          git checkout "$SPIKE_COMMIT"
          git submodule update --init --recursive

      - if: ${{ steps.cache-restore-spike.outputs.cache-hit != 'true' }}
        name: Build Spike (if not cached)
        run: |
          cd riscv-isa-sim
          mkdir build && cd build
          ../configure --prefix=/opt/riscv/spike
          make -j"$(nproc 2> /dev/null || sysctl -n hw.ncpu)"
          make install

      - if: ${{ steps.cache-restore-spike.outputs.cache-hit != 'true' }}
        name: Save spike to cache (if built)
        id: cache-save-spike
        uses: actions/cache/save@v3
        with:
          path: /opt/riscv/spike
          key: "spike-${{env.SPIKE_COMMIT}}"

      - name: Run Spike32 Tests
        id: spike32-tests
        run: |
          cd debug
          ./gdbserver.py targets/RISC-V/spike32.py --print-failures \
              --gcc /opt/riscv/toolchain/bin/riscv-none-elf-gcc \
              --gdb /opt/riscv/toolchain/bin/riscv-none-elf-gdb \
              --sim_cmd /opt/riscv/spike/bin/spike \
              --server_cmd /opt/riscv/openocd/bin/openocd

      - name: Run Spike64-2 Tests
        if: success() || steps.spike32-tests.conclusion == 'failure'
        run: |
          cd debug
          ./gdbserver.py targets/RISC-V/spike64-2.py --print-failures \
              --gcc /opt/riscv/toolchain/bin/riscv-none-elf-gcc \
              --gdb /opt/riscv/toolchain/bin/riscv-none-elf-gdb \
              --sim_cmd /opt/riscv/spike/bin/spike \
              --server_cmd /opt/riscv/openocd/bin/openocd

      - name: Archive test logs
        # Proceed even if there was a failed test
        if: ${{ success() || failure() }}
        uses: actions/upload-artifact@v3
        with:
          name: test-logs
          path: riscv-tests/debug/logs