From 3d41d9b256ae626c0dc434427c8e32450358d3b4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 6 Feb 2023 09:30:16 +0800 Subject: [PATCH] tty: serial: imx: disable Ageing Timer interrupt request irq [ Upstream commit ef25e16ea9674b713a68c3bda821556ce9901254 ] There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort info: [ 0.827367] ISV = 0, ISS = 0x00000004 [ 0.831033] CM = 0, WnR = 0 [ 0.833866] [0000000000000080] user address but active_mm is swapper [ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.845953] Modules linked in: [ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1 [ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT) [ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0 [ 0.872283] lr : imx_uart_int+0xf8/0x1ec The issue only happends in the inmate linux when Jailhouse hypervisor enabled. The test procedure is: while true; do jailhouse enable imx8mp.cell jailhouse cell linux xxxx sleep 10 jailhouse cell destroy 1 jailhouse disable sleep 5 done And during the upper test, press keys to the 2nd linux console. When `jailhouse cell destroy 1`, the 2nd linux has no chance to put the uart to a quiese state, so USR1/2 may has pending interrupts. Then when `jailhosue cell linux xx` to start 2nd linux again, the issue trigger. In order to disable irqs before requesting them, both UCR1 and UCR2 irqs should be disabled, so here fix that, disable the Ageing Timer interrupt in UCR2 as UCR1 does. Fixes: 8a61f0c70ae6 ("serial: imx: Disable irqs before requesting them") Suggested-by: Sherry Sun Reviewed-by: Sherry Sun Signed-off-by: Peng Fan Acked-by: Jason Liu Link: https://lore.kernel.org/r/20230206013016.29352-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/imx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 136da4bebe85a..77a4f4af3b8d5 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2348,6 +2348,11 @@ static int imx_uart_probe(struct platform_device *pdev) ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN); imx_uart_writel(sport, ucr1, UCR1); + /* Disable Ageing Timer interrupt */ + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 &= ~UCR2_ATEN; + imx_uart_writel(sport, ucr2, UCR2); + /* * In case RS485 is enabled without GPIO RTS control, the UART IP * is used to control CTS signal. Keep both the UART and Receiver