Skip to content

pmodels/bolt

 
 

Repository files navigation

BOLT: OpenMP over Lightweight Threads

BOLT targets a high-performing OpenMP implementation, especially specialized for fine-grain parallelism. BOLT utilizes a lightweight threading model for its underlying threading mechanism. It currently adopts Argobots, a new holistic, low-level threading and tasking runtime, in order to overcome shortcomings of conventional OS-level threads. The current BOLT implementation is based on the OpenMP runtime in LLVM, and thus it can be used with LLVM/Clang, Intel OpenMP compiler, and GCC. More information about BOLT can be found at http://www.bolt-omp.org.

  1. Getting Started
  2. Testing BOLT
  3. BOLT-Specific Environmental Variables
  4. Reporting Problems
  5. Alternate Build Options

  1. Getting Started ==================

The following instructions take you through a sequence of steps to get the default configuration of BOLT up and running.

Henceforth, VERSION indicates the version number of the release tarball.

(a) You will need the following prerequisites.

- REQUIRED: This tar file bolt-VERSION.tar.gz

- REQUIRED: C and C++ compilers (gcc and g++ are sufficient)

- REQUIRED: CMake (http://www.cmake.org/download)

- OPTIONAL: Argobots (http://www.argobots.org)
            The BOLT release tarball includes the Argobots source code, and
            thus you can build BOLT together with the built-in Argobots.
            Of course, you can use your own Argobots build instead of the
            accompanied one.  In the latter case, we assume Argobots has
            been installed in /home/USERNAME/argobots-install.

Also, you need to know what shell you are using since different shell has different command syntax. Command "echo $SHELL" prints out the current shell used by your terminal program.

Note: if you obtained BOLT via github, the following commands download the built-in Argobots from the Argobots repository.

git submodule init
git submodule update

(b) Unpack the tar file and create a build directory:

tar xzf bolt-VERSION.tar.gz
mkdir bolt-build
cd bolt-build

If your tar doesn't accept the z option, use

gunzip bolt-VERSION.tar.gz
tar xf bolt-VERSION.tar
mkdir bolt-build
cd bolt-build

(c) Choose an installation directory, say /home/USERNAME/bolt-install, which is assumed to be non-existent or empty.

(d) Configure BOLT specifying the installation directory:

If you want to use the built-in Argobots,

for csh and tcsh:

  cmake ../bolt-VERSION -G "Unix Makefiles" \
      -DCMAKE_INSTALL_PREFIX=/home/USERNAME/bolt-install \
      -DCMAKE_C_COMPILER=<C compiler> \
      -DCMAKE_CXX_COMPILER=<C++ compiler> \
      -DOPENMP_TEST_C_COMPILER=<C compiler for testing> \
      -DOPENMP_TEST_CXX_COMPILER=<C++ compiler for testing> \
      -DCMAKE_BUILD_TYPE=Release \
      -DLIBOMP_USE_ARGOBOTS=on \
      |& tee c.txt

for bash and sh:

  cmake ../bolt-VERSION -G "Unix Makefiles" \
      -DCMAKE_INSTALL_PREFIX=/home/USERNAME/bolt-install \
      -DCMAKE_C_COMPILER=<C compiler> \
      -DCMAKE_CXX_COMPILER=<C++ compiler> \
      -DOPENMP_TEST_C_COMPILER=<C compiler for testing> \
      -DOPENMP_TEST_CXX_COMPILER=<C++ compiler for testing> \
      -DCMAKE_BUILD_TYPE=Release \
      -DLIBOMP_USE_ARGOBOTS=on \
      2>&1 | tee c.txt

If you want to use your own Argobots build,

for csh and tcsh:

  cmake ../bolt-VERSION -G "Unix Makefiles" \
      -DCMAKE_INSTALL_PREFIX=/home/USERNAME/bolt-install \
      -DCMAKE_C_COMPILER=<C compiler> \
      -DCMAKE_CXX_COMPILER=<C++ compiler> \
      -DOPENMP_TEST_C_COMPILER=<C compiler for testing> \
      -DOPENMP_TEST_CXX_COMPILER=<C++ compiler for testing> \
      -DCMAKE_BUILD_TYPE=Release \
      -DLIBOMP_USE_ARGOBOTS=on \
      -DLIBOMP_ARGOBOTS_INSTALL_DIR=/home/USERNAME/argobots-install \
      |& tee c.txt

for bash and sh:

  cmake ../bolt-VERSION -G "Unix Makefiles" \
      -DCMAKE_INSTALL_PREFIX=/home/USERNAME/bolt-install \
      -DCMAKE_C_COMPILER=<C compiler> \
      -DCMAKE_CXX_COMPILER=<C++ compiler> \
      -DOPENMP_TEST_C_COMPILER=<C compiler for testing> \
      -DOPENMP_TEST_CXX_COMPILER=<C++ compiler for testing> \
      -DCMAKE_BUILD_TYPE=Release \
      -DLIBOMP_USE_ARGOBOTS=on \
      -DLIBOMP_ARGOBOTS_INSTALL_DIR=/home/USERNAME/argobots-install \
      2>&1 | tee c.txt

Bourne-like shells, sh and bash, accept "2>&1 |". Csh-like shell, csh and tcsh, accept "|&". If a failure occurs, the cmake command will display the error. Most errors are straight-forward to follow.

(e) Build BOLT:

for csh and tcsh:

  make |& tee m.txt

for bash and sh:

  make 2>&1 | tee m.txt

This step should succeed if there were no problems with the preceding step. Check file m.txt. If there were problems, do a "make clean" and then run make again with V=1 and VERBOSE=1.

make V=1 VERBOSE=1 |& tee m.txt       (for csh and tcsh)

OR

make V=1 VERBOSE=1 2>&1 | tee m.txt   (for bash and sh)

Then go to step 3 below, for reporting the issue to the BOLT developers and other users.

(f) Install BOLT:

for csh and tcsh:

  make install |& tee mi.txt

for bash and sh:

  make install 2>&1 | tee mi.txt

This step collects all required header and library files in the directory specified by the prefix argument to cmake.


  1. Testing BOLT ===============

To test BOLT, you can run the test suite. Compilers for testing must be specified when you run cmake.

For example, if llvm-lit is installed:

cd bolt-build
NUM_PARALLEL_TESTS=16
llvm-lit runtime/test -v -j $NUM_PARALLEL_TESTS --timeout 600

If you run into any problems on running the test suite, please follow step 3 below for reporting them to the BOLT developers and other users.


  1. BOLT-Specific Environmental Variables ===============

BOLT reveals several environmental variables specific to BOLT.

KMP_ABT_NUM_ESS=<int>: Set the number of execution streams which are
                       running on OS-level threads (e.g., Pthreads).
KMP_ABT_SCHED_SLEEP=<1|0>: If it is set to 1, sleep a scheduler when the
                           associate pools are empty.
KMP_ABT_VERBOSE=<1|0>: If it is set to 1, print all the BOLT-specific
                       parameters on runtime initialization.
KMP_ABT_FORK_CUTOFF=<int>: Set the cut-off threshold used for a
                           divide-and-conquer thread creation.
KMP_ABT_FORK_NUM_WAYS=<int>: Set the number of ways for a
                             divide-and-conquer thread creation.
KMP_ABT_SCHED_MIN_SLEEP_NSEC=<int>: Set the minimum scheduler sleep time
                                    (nanoseconds).
KMP_ABT_SCHED_MAX_SLEEP_NSEC=<int>: Set the maximum scheduler sleep time
                                    (nanoseconds).
KMP_ABT_SCHED_EVENT_FREQ=<int>: Set the event-checking frequency of
                                schedulers.
KMP_ABT_WORK_STEAL_FREQ=<int>: Set the random work stealing frequency of
                               schedulers.

  1. Reporting Problems =====================

If you have problems with the installation or usage of BOLT, please follow these steps:

(a) First visit the Frequently Asked Questions (FAQ) page at https://github.com/pmodels/bolt/wiki/FAQ to see if the problem you are facing has a simple solution.

(b) If you cannot find an answer on the FAQ page, look through previous email threads on the [email protected] mailing list archive (https://lists.bolt-omp.org/mailman/listinfo/discuss). It is likely someone else had a similar problem, which has already been resolved before.

(c) If neither of the above steps work, please send an email to [email protected]. You need to subscribe to this list (https://lists.bolt-omp.org/mailman/listinfo/discuss) before sending an email.

Your email should contain the following files. ONCE AGAIN, PLEASE COMPRESS BEFORE SENDING, AS THE FILES CAN BE LARGE. Note that, depending on which step the build failed, some of the files might not exist.

bolt-build/c.txt (generated in step 1(d) above)
bolt-build/m.txt (generated in step 1(e) above)
bolt-build/mi.txt (generated in step 1(f) above)

DID WE MENTION? DO NOT FORGET TO COMPRESS THESE FILES!

Finally, please include the actual error you are seeing when running the application. If possible, please try to reproduce the error with a smaller application or benchmark and send that along in your bug report.

(d) If you have found a bug in BOLT, we request that you report it at our github issues page (https://github.com/pmodels/bolt/issues). Even if you believe you have found a bug, we recommend you sending an email to [email protected] first.


  1. Alternate Build Options ==============================

BOLT is based on the OpenMP subproject of LLVM for runtime, and thus it uses the same build options provided in LLVM.

Please visit http://openmp.llvm.org/ for more build options.

Packages

No packages published

Languages

  • C++ 66.5%
  • C 22.3%
  • CMake 3.2%
  • Perl 3.2%
  • Cuda 2.3%
  • Assembly 1.4%
  • Other 1.1%