Skip to content

Latest commit

 

History

History
53 lines (38 loc) · 1.32 KB

README.md

File metadata and controls

53 lines (38 loc) · 1.32 KB
Raw

Ansible automation

3 playbooks are available to grab data from Netbox and:

  • upload a full config to the Aristat Switch
  • upload the audio mapping for the ST2110 decapsulator
  • generate the IP-mac correspondance in the DHCP server

Setup

Pre-requisistes: pull docker image that include ansible libs and pynetbox libs:

docker pull deplops/avdbase:3.8.5

Pull ansbile-avd git submodule and start the docker container:

git submodule update --recursive --init
cd ./ansible
./run.sh
# Enter a dummy password for the vault as this demo project doesn't use any vault.

You may then use these 2 helpers:

  • help.sh
  • log.sh

Upload the switch config

Once entered in the docker container, you'll see a couple of playbook commands like:

ansible-playbook -i ./inventories/switch/hosts.yml   ./playbooks/upload_sw_config.yml
ansible-playbook -i ./inventories/gateways/hosts.yml ./playbooks/upload_gw_config.yml
ansible-playbook -i ./inventories/gateways/hosts.yml ./playbooks/dhcp_config.yml

Recover the switch config:

Plug this: Switch-console-port <-> RJ-45-to-DB9 <-> DB9-to-USB <-> config-server Then from the terminal of the config-server:

stty -F /dev/ttyUSB0 9600 cs8 -cstopb -parenb #8bit, no paraity, 1 stop bit
sudo microcom -s 9600 -p /dev/ttyUSB0
admin:admin
copy startup-config running-config