You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Using the hyperpixel4 square.
Whenever i add the line as mentioned in issue 177, dtoverlay=vc4-kms-dpi-hyperpixel4
and reboot, i first see the raspberry pi icon in that white square showing up just fine.
But after, it gets stuck in boot and it keeps franticly flashing an underscore character in the top left corner.
i have tried nummerous different approaches with tons of reinstalling the whole pi os all together.
im using this version:
as mentioned in issue 177, this version has baked in support for the hyperpixel4.
other approaches i have tried is using the legacy installer, and installing the branch square-2021 manually, they all work, but the screen remains black. however, the touch screen still works as it responds when i use the hdmi connected to a display. when i touch the hyperpixel square display, it moves my cursor on the hdmi display. it however just keeps showing a black screen with a dim ambient light.
RPI 3B+, hyperpixel4 square after 2022.
The text was updated successfully, but these errors were encountered:
I think I have a really old version of the HyperPixel 4.0 rectangle (how can I check the HP4 version?).
I use a Raspberry Pi 3B+ Rev 1.3.
I installed Raspberry Pi OS Legacy 64bit Bullseye.
I installed with the legacy installer -> rpi3 + rectangular.
I commented out dtoverlay=vc4-kms-v3d in boot/config.txt.
I executed hyperpixel4-rotate right and rebooted to get a horizontal layout.
Hope this helps and maybe we can get "out of the box" support for older hyperpixels too.
It would be nice if someone at pimoroni please could explain how to see the version/revision of the hyperpixel4 and for which ver/rev of the hyperpixel the default one line change in the /boot/firmware/config.txt should work and if it works with bookworm too.
Using the hyperpixel4 square.
Whenever i add the line as mentioned in issue 177,
dtoverlay=vc4-kms-dpi-hyperpixel4
and reboot, i first see the raspberry pi icon in that white square showing up just fine.
But after, it gets stuck in boot and it keeps franticly flashing an underscore character in the top left corner.
i have tried nummerous different approaches with tons of reinstalling the whole pi os all together.
im using this version:
as mentioned in issue 177, this version has baked in support for the hyperpixel4.
other approaches i have tried is using the legacy installer, and installing the branch square-2021 manually, they all work, but the screen remains black. however, the touch screen still works as it responds when i use the hdmi connected to a display. when i touch the hyperpixel square display, it moves my cursor on the hdmi display. it however just keeps showing a black screen with a dim ambient light.
RPI 3B+, hyperpixel4 square after 2022.
The text was updated successfully, but these errors were encountered: