Windows 10 VM not starting on host Ubuntu 20.04.6

[Malv93]

When I try yo start a Windows 10 Virtual Machine I get this output:

I can't understand if it is normal and what is the issue. I just followed the guide in the quickemu documentation.

The quickemu --vm windows-10.conf output:

Quickemu 4.9.6 using /usr/bin/qemu-system-x86_64 v6.0.0
 - Host:     Ubuntu 20.04.6 LTS running Linux 5.15.0-119-generic NB050
 - CPU:      Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz 
 - CPU VM:   host, 1 Socket(s), 2 Core(s), 2 Thread(s)
 - MSR:      WARNING! Ignoring unhandled Model-Specific Registers is disabled.

             echo 1 | sudo tee /sys/module/kvm/parameters/ignore_msrs

             If you are unable to run macOS or Windows VMs then run the above 👆
             This will enable ignoring of unhandled MSRs until you reboot the host.
             You can make this change permanent by running: 'quickemu --ignore-msrs-always'
 - RAM VM:   8G RAM
 - BOOT:     EFI (Windows), OVMF (/usr/share/OVMF/OVMF_CODE.fd), SecureBoot (off).
 - Disk:     windows-10/disk.qcow2 (64G)
             Looks unused, booting from windows-10/Win10_22H2_EnglishInternational_x64v1.iso
 - Boot ISO: windows-10/Win10_22H2_EnglishInternational_x64v1.iso
 - CD-ROM:   windows-10/virtio-win.iso
 - Display:  SDL, virtio-vga,virgl=on, GL (on), VirGL (on) @ (1280 x 800)
 - Sound:    intel-hda (hda-micro)
 - ssh:      On host:  ssh user@localhost -p 22220
 - WebDAV:   On guest: dav://localhost:9843/
 - Network:  User (virtio-net)
 - Monitor:  On host:  socat -,echo=0,icanon=0 unix-connect:windows-10/windows-10-monitor.socket
 - Serial:   On host:  socat -,echo=0,icanon=0 unix-connect:windows-10/windows-10-serial.socket
 - Process:  Started windows-10.conf as windows-10 (253820)
 - Sending:  via socket sendkey ret
 - Sending:  via socket sendkey ret
 - Sending:  via socket sendkey ret
 - Sending:  via socket sendkey ret
 - Sending:  via socket sendkey ret

The host details:

  Operating System: Ubuntu 20.04.6 LTS
            Kernel: Linux 5.15.0-119-generic
      Architecture: x86-64

The windows-10.conf:

#!/usr/bin/quickemu --vm
guest_os="windows"
disk_img="windows-10/disk.qcow2"
iso="windows-10/Win10_22H2_EnglishInternational_x64v1.iso"
fixed_iso="windows-10/virtio-win.iso"
disk_size="64G

Many thanks for the support.