Bitcraze
Building the ai_sail code for the AI deck #265
-
|
Hello, I’m trying to build the codes from this repository jeguzzi/ai_sail to try and stream images from the AI deck at a higher rate. But I’m not really sure how I should start — so I’d appreciate some hints on how to accomplish this. My primary objective is to stream images at a higher rate (at least 30 fps). Thanks. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 2 replies
-
|
Hi! We had an similar discussion here: https://github.com/orgs/bitcraze/discussions/127 And last blogpost talked about it too: https://www.bitcraze.io/2022/09/using-the-ai-deck-for-crtp-over-wifi-via-cpx/ The short answer is, technically it seems to be possible but the current drivers or implementation it is still limiting it to 7 - 12 fps. More investigation is required to get this higher but due to other projects we will be delayed for the next couple of weeks to really investigate it. |
Beta Was this translation helpful? Give feedback.
-
|
@shreeram-murali If you think the answer is the proper solution, please consider clicking "Mark as answer". Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Done! Thank you. |
Beta Was this translation helpful? Give feedback.
Hi! We had an similar discussion here: https://github.com/orgs/bitcraze/discussions/127
And last blogpost talked about it too: https://www.bitcraze.io/2022/09/using-the-ai-deck-for-crtp-over-wifi-via-cpx/
The short answer is, technically it seems to be possible but the current drivers or implementation it is still limiting it to 7 - 12 fps. More investigation is required to get this higher but due to other projects we will be delayed for the next couple of weeks to really investigate it.