Whlie Flash Wifi Example it stops at 99% #159
Replies: 6 comments 6 replies
-
Hi! I assume you went through this tutorial right? Which version of the AIdeck 1.1 do you have? You can find the revision letter on the bottom of the deck. Here are some things you can try:
|
Beta Was this translation helpful? Give feedback.
-
I have tried the Getting started many times.But the ai deck bootloader
stops at 99% only .
Please help with this.
…On Tue, 26 Jul, 2022, 1:01 pm Kimberly McGuire, ***@***.***> wrote:
Hi!
I assume you went through this tutorial
<https://www.bitcraze.io/documentation/tutorials/getting-started-with-aideck/>
right?
Which version of the AIdeck 1.1 do you have? You can find the revision
letter on the bottom of the deck.
Here are some things you can try:
- You can try out the solution presented in this discussion before:
#57
- Also reflashing the ESP via these instructions sometimes
<https://www.bitcraze.io/documentation/tutorials/getting-started-with-aideck/#update-crazyflie-and-aideck-firmware>
helps as well.
—
Reply to this email directly, view it on GitHub
<#159 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATBUQDKVYK7GMKCBOANTJHLVV6H4DANCNFSM54URFZQQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Yes.
1. I have AIdeck 1.1
2. I tried the solution of the discussion .
#57
3.I saw ESP32: I (910) SYS: Initialized in the console.
But the flashing stops at 99%.
…On Wed, 27 Jul, 2022, 12:03 pm Kimberly McGuire, ***@***.***> wrote:
Could you please answer the rest of the question I had above?
1. Which revision of the AIdeck 1.1 do you have
2. Have you tried the solution of the discussion here:
#57
3. Let me reframe my earlier question about the ESP reflashing: Did at
any point in the tutorial
<https://www.bitcraze.io/documentation/tutorials/getting-started-with-aideck/>,
something did not go as expected?
a. Example: You didn't see ESP32: I (910) SYS: Initialized in the
console after this step
<https://www.bitcraze.io/documentation/tutorials/getting-started-with-aideck/#update-crazyflie-and-aideck-firmware>
—
Reply to this email directly, view it on GitHub
<#159 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATBUQDJOAJKNVVRIWEVX3UTVWDJ5LANCNFSM54URFZQQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Yes I have Rev C1
…On Thu, 28 Jul, 2022, 12:57 pm Kimberly McGuire, ***@***.***> wrote:
[image: image]
<https://user-images.githubusercontent.com/11061260/181446016-3b17dc6b-a599-4038-9ea3-115dea098381.png>
Here is where you can find the revision of the AIdeck 1.1
—
Reply to this email directly, view it on GitHub
<#159 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATBUQDJJBE2I2LKJFT7GZTTVWIY6DANCNFSM54URFZQQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Since you have an older revision of the aideck, which is anything lower than rev. D, then you will need to flash the gap8 bootloader in order to get the over air flashing to work. You'll need an jtag cable programmer for that work but the tutorial will point you to the right page. A jlink programmer has been reported to work as well. |
Beta Was this translation helpful? Give feedback.
-
Respected sir/madam,
Thank you so much for the information we will sure check it out and get
back to you as soon as possible with a updation.
Thank you
…On Thu, 28 Jul, 2022, 1:13 pm Kimberly McGuire, ***@***.***> wrote:
Since you have an older revision of the aideck, which is anything lower
than rev. D, then you will need to flash the gap8 bootloader in order to
get the over air flashing to work. You'll need an jtag cable programmer for
that work but the tutorial will point you to the right page. A jlink
programmer has been reported to work as well.
'Gap8 bootloader (for older AIdecks revisions A-C)
<https://www.bitcraze.io/documentation/tutorials/getting-started-with-aideck/#:~:text=the%20steps%20again.-,Gap8%20bootloader%20(for%20older%20AIdecks%20revisions%20A%2DC),-If%20you%20do>
—
Reply to this email directly, view it on GitHub
<#159 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATBUQDJUHJPSRFY7ZQWYBLLVWI23ZANCNFSM54URFZQQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
cfloader flash aideck_gap8_wifi_img_streamer_with_ap.bin deck-bcAI:gap8-fw -w radio://0/80/2M/E7E7E7E7E7
Reset to bootloader mode ...
Could not save cache, no writable directory
Could not save cache, no writable directory
Skipping bcAI:esp, not in the target list
Deck bcAI:gap8, reset to bootloader
| 0% Writing to bcAI:gap8 deck memory
/ 1% Writing to bcAI:gap8 deck memory
\ 3% Writing to bcAI:gap8 deck memory
| 4% Writing to bcAI:gap8 deck memory
/ 5% Writing to bcAI:gap8 deck memory
\ 7% Writing to bcAI:gap8 deck memory
| 8% Writing to bcAI:gap8 deck memory
/ 9% Writing to bcAI:gap8 deck memory
\ 11% Writing to bcAI:gap8 deck memory
| 12% Writing to bcAI:gap8 deck memory
/ 13% Writing to bcAI:gap8 deck memory
\ 15% Writing to bcAI:gap8 deck memory
| 16% Writing to bcAI:gap8 deck memory
/ 17% Writing to bcAI:gap8 deck memory
\ 19% Writing to bcAI:gap8 deck memory
| 20% Writing to bcAI:gap8 deck memory
/ 21% Writing to bcAI:gap8 deck memory
\ 23% Writing to bcAI:gap8 deck memory
| 24% Writing to bcAI:gap8 deck memory
/ 25% Writing to bcAI:gap8 deck memory
\ 27% Writing to bcAI:gap8 deck memory
| 28% Writing to bcAI:gap8 deck memory
/ 29% Writing to bcAI:gap8 deck memory
\ 31% Writing to bcAI:gap8 deck memory
| 32% Writing to bcAI:gap8 deck memory
/ 33% Writing to bcAI:gap8 deck memory
\ 35% Writing to bcAI:gap8 deck memory
| 36% Writing to bcAI:gap8 deck memory
/ 37% Writing to bcAI:gap8 deck memory
\ 39% Writing to bcAI:gap8 deck memory
| 40% Writing to bcAI:gap8 deck memory
/ 41% Writing to bcAI:gap8 deck memory
\ 43% Writing to bcAI:gap8 deck memory
| 44% Writing to bcAI:gap8 deck memory
/ 45% Writing to bcAI:gap8 deck memory
\ 47% Writing to bcAI:gap8 deck memory
| 48% Writing to bcAI:gap8 deck memory
/ 49% Writing to bcAI:gap8 deck memory
\ 51% Writing to bcAI:gap8 deck memory
| 52% Writing to bcAI:gap8 deck memory
/ 53% Writing to bcAI:gap8 deck memory
\ 55% Writing to bcAI:gap8 deck memory
| 56% Writing to bcAI:gap8 deck memory
/ 57% Writing to bcAI:gap8 deck memory
\ 59% Writing to bcAI:gap8 deck memory
| 60% Writing to bcAI:gap8 deck memory
/ 61% Writing to bcAI:gap8 deck memory
\ 63% Writing to bcAI:gap8 deck memory
| 64% Writing to bcAI:gap8 deck memory
/ 65% Writing to bcAI:gap8 deck memory
\ 67% Writing to bcAI:gap8 deck memory
| 68% Writing to bcAI:gap8 deck memory
/ 69% Writing to bcAI:gap8 deck memory
\ 71% Writing to bcAI:gap8 deck memory
| 72% Writing to bcAI:gap8 deck memory
/ 73% Writing to bcAI:gap8 deck memory
\ 75% Writing to bcAI:gap8 deck memory
| 76% Writing to bcAI:gap8 deck memory
/ 77% Writing to bcAI:gap8 deck memory
\ 79% Writing to bcAI:gap8 deck memory
| 80% Writing to bcAI:gap8 deck memory
/ 81% Writing to bcAI:gap8 deck memory
\ 83% Writing to bcAI:gap8 deck memory
| 84% Writing to bcAI:gap8 deck memory
/ 85% Writing to bcAI:gap8 deck memory
\ 87% Writing to bcAI:gap8 deck memory
| 88% Writing to bcAI:gap8 deck memory
/ 89% Writing to bcAI:gap8 deck memory
\ 91% Writing to bcAI:gap8 deck memory
| 92% Writing to bcAI:gap8 deck memory
/ 93% Writing to bcAI:gap8 deck memory
\ 95% Writing to bcAI:gap8 deck memory
| 96% Writing to bcAI:gap8 deck memory
/ 97% Writing to bcAI:gap8 deck memory
\ 99% Writing to bcAI:gap8 deck memory
It stops at 99% ...
Beta Was this translation helpful? Give feedback.
All reactions