diff --git a/.pylintrc b/.pylintrc
index 4cc9f477f..eb57fc54f 100644
--- a/.pylintrc
+++ b/.pylintrc
@@ -1,27 +1,77 @@
-[MASTER]
+[MAIN]
+
+# Analyse import fallback blocks. This can be used to support both Python 2 and
+# 3 compatible code, which means that the block might have code that exists
+# only in one or another interpreter, leading to false positives when analysed.
+analyse-fallback-blocks=no
+
+# Clear in-memory caches upon conclusion of linting. Useful if running pylint
+# in a server-like mode.
+clear-cache-post-run=no
+
+# Load and enable all available extensions. Use --list-extensions to see a list
+# all available extensions.
+#enable-all-extensions=
+
+# In error mode, messages with a category besides ERROR or FATAL are
+# suppressed, and no reports are done by default. Error mode is compatible with
+# disabling specific errors.
+#errors-only=
+
+# Always return a 0 (non-error) status code, even if lint errors are found.
+# This is primarily useful in continuous integration scripts.
+#exit-zero=
 
 # A comma-separated list of package or module names from where C extensions may
 # be loaded. Extensions are loading into the active Python interpreter and may
 # run arbitrary code.
-extension-pkg-whitelist=pydantic
+extension-pkg-allow-list=
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code. (This is an alternative name to extension-pkg-allow-list
+# for backward compatibility.)
+extension-pkg-whitelist=
 
-# Specify a score threshold to be exceeded before program exits with error.
-fail-under=10.0
+# Return non-zero exit code if any of these messages/categories are detected,
+# even if score is above --fail-under value. Syntax same as enable. Messages
+# specified are enabled, while categories only check already-enabled messages.
+fail-on=
 
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
+# Specify a score threshold under which the program will exit with error.
+fail-under=10
+
+# Interpret the stdin as a python script, whose filename needs to be passed as
+# the module_or_package argument.
+#from-stdin=
+
+# Files or directories to be skipped. They should be base names, not paths.
 ignore=CVS
 
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
+# Add files or directories matching the regular expressions patterns to the
+# ignore-list. The regex matches against paths and can be in Posix or Windows
+# format. Because '\\' represents the directory delimiter on Windows systems,
+# it can't be used as an escape character.
+ignore-paths=
+
+# Files or directories matching the regular expression patterns are skipped.
+# The regex matches against base names, not paths. The default value ignores
+# Emacs file locks
+ignore-patterns=^\.#
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis). It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
 
 # Python code to execute, usually for sys.path manipulation such as
 # pygtk.require().
 #init-hook=
 
 # Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use.
+# number of processors available to use, and will cap the count on Windows to
+# avoid hangs.
 jobs=1
 
 # Control the amount of potential inferred values when inferring a single
@@ -36,6 +86,19 @@ load-plugins=
 # Pickle collected data for later comparisons.
 persistent=yes
 
+# Minimum Python version to use for version dependent checks. Will default to
+# the version used to run pylint.
+py-version=3.10
+
+# Discover python modules and packages in the file system subtree.
+recursive=no
+
+# Add paths to the list of the source roots. Supports globbing patterns. The
+# source root is an absolute path or a path relative to the current working
+# directory used to determine a package namespace for modules located under the
+# source root.
+source-roots=
+
 # When enabled, pylint would attempt to guess common misconfiguration and emit
 # user-friendly hints instead of false-positive error messages.
 suggestion-mode=yes
@@ -44,222 +107,8 @@ suggestion-mode=yes
 # active Python interpreter and may run arbitrary code.
 unsafe-load-any-extension=no
 
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        deprecated-operator-function,
-        deprecated-urllib-function,
-        xreadlines-attribute,
-        deprecated-sys-function,
-        exception-escape,
-        comprehension-escape,
-
-# added disables
-        design,
-        similarities,
-        invalid-name,
-        missing-module-docstring,
-        missing-class-docstring,
-        missing-function-docstring,
-        attribute-defined-outside-init,
-        fixme,
-        logging-fstring-interpolation,
-        line-too-long,
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'error', 'warning', 'refactor', and 'convention'
-# which contain the number of messages in each category, as well as 'statement'
-# which is the total number of statements analyzed. This score is used by the
-# global evaluation report (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=old
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
+# In verbose mode, extra non-checker-related info will be displayed.
+#verbose=
 
 
 [BASIC]
@@ -268,13 +117,15 @@ signature-mutators=
 argument-naming-style=snake_case
 
 # Regular expression matching correct argument names. Overrides argument-
-# naming-style.
+# naming-style. If left empty, argument names will be checked with the set
+# naming style.
 #argument-rgx=
 
 # Naming style matching correct attribute names.
 attr-naming-style=snake_case
 
 # Regular expression matching correct attribute names. Overrides attr-naming-
+# style. If left empty, attribute names will be checked with the set naming
 # style.
 #attr-rgx=
 
@@ -294,20 +145,30 @@ bad-names-rgxs=
 class-attribute-naming-style=any
 
 # Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style.
+# attribute-naming-style. If left empty, class attribute names will be checked
+# with the set naming style.
 #class-attribute-rgx=
 
+# Naming style matching correct class constant names.
+class-const-naming-style=UPPER_CASE
+
+# Regular expression matching correct class constant names. Overrides class-
+# const-naming-style. If left empty, class constant names will be checked with
+# the set naming style.
+#class-const-rgx=
+
 # Naming style matching correct class names.
 class-naming-style=PascalCase
 
 # Regular expression matching correct class names. Overrides class-naming-
-# style.
+# style. If left empty, class names will be checked with the set naming style.
 #class-rgx=
 
 # Naming style matching correct constant names.
 const-naming-style=UPPER_CASE
 
 # Regular expression matching correct constant names. Overrides const-naming-
+# style. If left empty, constant names will be checked with the set naming
 # style.
 #const-rgx=
 
@@ -319,7 +180,8 @@ docstring-min-length=-1
 function-naming-style=snake_case
 
 # Regular expression matching correct function names. Overrides function-
-# naming-style.
+# naming-style. If left empty, function names will be checked with the set
+# naming style.
 #function-rgx=
 
 # Good variable names which should always be accepted, separated by a comma.
@@ -341,21 +203,22 @@ include-naming-hint=no
 inlinevar-naming-style=any
 
 # Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style.
+# inlinevar-naming-style. If left empty, inline iteration names will be checked
+# with the set naming style.
 #inlinevar-rgx=
 
 # Naming style matching correct method names.
 method-naming-style=snake_case
 
 # Regular expression matching correct method names. Overrides method-naming-
-# style.
+# style. If left empty, method names will be checked with the set naming style.
 #method-rgx=
 
 # Naming style matching correct module names.
 module-naming-style=snake_case
 
 # Regular expression matching correct module names. Overrides module-naming-
-# style.
+# style. If left empty, module names will be checked with the set naming style.
 #module-rgx=
 
 # Colon-delimited sets of names that determine each other's naming style when
@@ -371,14 +234,93 @@ no-docstring-rgx=^_
 # These decorators are taken in consideration only for invalid-name.
 property-classes=abc.abstractproperty
 
+# Regular expression matching correct type alias names. If left empty, type
+# alias names will be checked with the set naming style.
+#typealias-rgx=
+
+# Regular expression matching correct type variable names. If left empty, type
+# variable names will be checked with the set naming style.
+#typevar-rgx=
+
 # Naming style matching correct variable names.
 variable-naming-style=snake_case
 
 # Regular expression matching correct variable names. Overrides variable-
-# naming-style.
+# naming-style. If left empty, variable names will be checked with the set
+# naming style.
 #variable-rgx=
 
 
+[CLASSES]
+
+# Warn about protected attribute access inside special methods
+check-protected-access-in-special-methods=no
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,
+                      __new__,
+                      setUp,
+                      asyncSetUp,
+                      __post_init__
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,_fields,_replace,_source,_make,os._exit
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=mcs
+
+
+[DESIGN]
+
+# List of regular expressions of class ancestor names to ignore when counting
+# public methods (see R0903)
+exclude-too-few-public-methods=
+
+# List of qualified class names to ignore when counting class parents (see
+# R0901)
+ignored-parents=
+
+# Maximum number of arguments for function / method.
+max-args=5
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Maximum number of boolean expressions in an if statement (see R0916).
+max-bool-expr=5
+
+# Maximum number of branch for function / method body.
+max-branches=12
+
+# Maximum number of locals for function / method body.
+max-locals=15
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of return / yield for function / method body.
+max-returns=6
+
+# Maximum number of statements in function / method body.
+max-statements=50
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when caught.
+overgeneral-exceptions=builtins.BaseException,builtins.Exception
+
+
 [FORMAT]
 
 # Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
@@ -409,50 +351,111 @@ single-line-class-stmt=no
 single-line-if-stmt=no
 
 
-[SIMILARITIES]
+[IMPORTS]
 
-# Ignore comments when computing similarities.
-ignore-comments=yes
+# List of modules that can be imported at any level, not just the top level
+# one.
+allow-any-import-level=
 
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
+# Allow explicit reexports by alias from a package __init__.
+allow-reexport-from-package=no
 
-# Ignore imports when computing similarities.
-ignore-imports=no
+# Allow wildcard imports from modules that define __all__.
+allow-wildcard-with-all=no
 
-# Minimum lines number of a similarity.
-min-similarity-lines=4
+# Deprecated modules which should not be used, separated by a comma.
+deprecated-modules=
 
+# Output a graph (.gv or any supported image format) of external dependencies
+# to the given file (report RP0402 must not be disabled).
+ext-import-graph=
 
-[STRING]
+# Output a graph (.gv or any supported image format) of all (i.e. internal and
+# external) dependencies to the given file (report RP0402 must not be
+# disabled).
+import-graph=
 
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
+# Output a graph (.gv or any supported image format) of internal dependencies
+# to the given file (report RP0402 must not be disabled).
+int-import-graph=
 
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
+# Force import order to recognize a module as part of the standard
+# compatibility libraries.
+known-standard-library=
 
+# Force import order to recognize a module as part of a third party library.
+known-third-party=enchant
 
-[SPELLING]
+# Couples of modules and preferred modules, separated by a comma.
+preferred-modules=
 
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
 
-# Spelling dictionary name. Available dictionaries: none. To make it work,
-# install the python-enchant package.
-spelling-dict=
+[LOGGING]
 
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
+# The type of string formatting that logging methods do. `old` means using %
+# formatting, `new` is for `{}` formatting.
+logging-format-style=old
 
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
+# Logging modules to check that the string format arguments are in logging
+# function parameter format.
+logging-modules=logging
 
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, CONTROL_FLOW, INFERENCE, INFERENCE_FAILURE,
+# UNDEFINED.
+confidence=HIGH,
+           CONTROL_FLOW,
+           INFERENCE,
+           INFERENCE_FAILURE,
+           UNDEFINED
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once). You can also use "--disable=all" to
+# disable everything first and then re-enable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use "--disable=all --enable=classes
+# --disable=W".
+disable=raw-checker-failed,
+        bad-inline-option,
+        locally-disabled,
+        file-ignored,
+        suppressed-message,
+        useless-suppression,
+        deprecated-pragma,
+        use-symbolic-message-instead,
+        use-implicit-booleaness-not-comparison-to-string,
+        use-implicit-booleaness-not-comparison-to-zero,
+        design,
+        similarities,
+        invalid-name,
+        missing-module-docstring,
+        missing-class-docstring,
+        missing-function-docstring,
+        attribute-defined-outside-init,
+        fixme,
+        logging-fstring-interpolation,
+        line-too-long,
+        global-statement,
+        unnecessary-dunder-call,
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time (only on the command line, not in the configuration file where
+# it should appear only once). See also the "--disable" option for examples.
+enable=
+
+
+[METHOD_ARGS]
+
+# List of qualified names (i.e., library.method) which require a timeout
+# parameter e.g. 'requests.api.get,requests.api.post'
+timeout-methods=requests.api.delete,requests.api.get,requests.api.head,requests.api.options,requests.api.patch,requests.api.post,requests.api.put,requests.api.request
 
 
 [MISCELLANEOUS]
@@ -463,138 +466,186 @@ notes=FIXME,
       TODO
 
 # Regular expression of note tags to take in consideration.
-#notes-rgx=
+notes-rgx=
 
 
-[VARIABLES]
+[REFACTORING]
 
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
 
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
+# Complete name of functions that never returns. When checking for
+# inconsistent-return-statements if a never returning function is called then
+# it will be considered as an explicit return statement and no message will be
+# printed.
+never-returning-functions=sys.exit,argparse.parse_error
 
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
+# Let 'consider-using-join' be raised when the separator to join on would be
+# non-empty (resulting in expected fixes of the type: ``"- " + " -
+# ".join(items)``)
+suggest-join-with-non-empty-separator=yes
 
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
 
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore.
-ignored-argument-names=_.*|^ignored_|^unused_
+[REPORTS]
 
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
+# Python expression which should return a score less than or equal to 10. You
+# have access to the variables 'fatal', 'error', 'warning', 'refactor',
+# 'convention', and 'info' which contain the number of messages in each
+# category, as well as 'statement' which is the total number of statements
+# analyzed. This score is used by the global evaluation report (RP0004).
+evaluation=max(0, 0 if fatal else 10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10))
 
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details.
+msg-template=
 
+# Set the output format. Available formats are: text, parseable, colorized,
+# json2 (improved json format), json (old json format) and msvs (visual
+# studio). You can also give a reporter class, e.g.
+# mypackage.mymodule.MyReporterClass.
+#output-format=
 
-[IMPORTS]
+# Tells whether to display a full report or only the messages.
+reports=no
 
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
+# Activate the evaluation score.
+score=yes
 
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
 
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
+[SIMILARITIES]
 
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=optparse,tkinter.tix
+# Comments are removed from the similarity computation
+ignore-comments=yes
 
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled).
-ext-import-graph=
+# Docstrings are removed from the similarity computation
+ignore-docstrings=yes
 
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled).
-import-graph=
+# Imports are removed from the similarity computation
+ignore-imports=yes
 
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled).
-int-import-graph=
+# Signatures are removed from the similarity computation
+ignore-signatures=yes
 
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
+# Minimum lines number of a similarity.
+min-similarity-lines=4
 
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
 
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
+[SPELLING]
 
+# Limits count of emitted suggestions for spelling mistakes.
+max-spelling-suggestions=4
 
-[DESIGN]
+# Spelling dictionary name. No available dictionaries : You need to install
+# both the python package and the system dependency for enchant to work.
+spelling-dict=
 
-# Maximum number of arguments for function / method.
-max-args=5
+# List of comma separated words that should be considered directives if they
+# appear at the beginning of a comment and should not be checked.
+spelling-ignore-comment-directives=fmt: on,fmt: off,noqa:,noqa,nosec,isort:skip,mypy:
 
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
 
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
+# A path to a file that contains the private dictionary; one word per line.
+spelling-private-dict-file=
 
-# Maximum number of branch for function / method body.
-max-branches=12
+# Tells whether to store unknown words to the private dictionary (see the
+# --spelling-private-dict-file option) instead of raising a message.
+spelling-store-unknown-words=no
 
-# Maximum number of locals for function / method body.
-max-locals=15
 
-# Maximum number of parents for a class (see R0901).
-max-parents=7
+[STRING]
 
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
+# This flag controls whether inconsistent-quotes generates a warning when the
+# character used as a quote delimiter is used inconsistently within a module.
+check-quote-consistency=no
 
-# Maximum number of return / yield for function / method body.
-max-returns=6
+# This flag controls whether the implicit-str-concat should generate a warning
+# on implicit string concatenation in sequences defined over several lines.
+check-str-concat-over-line-jumps=no
 
-# Maximum number of statements in function / method body.
-max-statements=50
 
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
+[TYPECHECK]
 
+# List of decorators that produce context managers, such as
+# contextlib.contextmanager. Add to this list to register other decorators that
+# produce valid context managers.
+contextmanager-decorators=contextlib.contextmanager
 
-[CLASSES]
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
 
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      __post_init__
+# Tells whether to warn about missing members when the owner of the attribute
+# is inferred to be None.
+ignore-none=yes
 
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
+# This flag controls whether pylint should warn about no-member and similar
+# checks whenever an opaque object is returned when inferring. The inference
+# can return multiple potential results while evaluating a Python object, but
+# some branches might not be evaluated, which results in partial inference. In
+# that case, it might be useful to still emit no-member and other checks for
+# the rest of the inferred objects.
+ignore-on-opaque-inference=yes
 
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
+# List of symbolic message names to ignore for Mixin members.
+ignored-checks-for-mixins=no-member,
+                          not-async-context-manager,
+                          not-context-manager,
+                          attribute-defined-outside-init
 
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=cls
+# List of class names for which member attributes should not be checked (useful
+# for classes with dynamically set attributes). This supports the use of
+# qualified names.
+ignored-classes=optparse.Values,thread._local,_thread._local,argparse.Namespace
 
+# Show a hint with possible names when a member name was not found. The aspect
+# of finding the hint is based on edit distance.
+missing-member-hint=yes
 
-[EXCEPTIONS]
+# The minimum edit distance a name should have in order to be considered a
+# similar match for a missing member name.
+missing-member-hint-distance=1
 
-# Exceptions that will emit a warning when being caught. Defaults to
-# "BaseException, Exception".
-overgeneral-exceptions=BaseException,
-                       Exception
+# The total number of similar names that should be taken in consideration when
+# showing a hint for a missing member.
+missing-member-max-choices=1
+
+# Regex pattern to define which classes are considered mixins.
+mixin-class-rgx=.*[Mm]ixin
+
+# List of decorators that change the signature of a decorated function.
+signature-mutators=
+
+
+[VARIABLES]
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid defining new builtins when possible.
+additional-builtins=
+
+# Tells whether unused global variables should be treated as a violation.
+allow-global-unused-variables=yes
+
+# List of names allowed to shadow builtins
+allowed-redefined-builtins=
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,
+          _cb
+
+# A regular expression matching the name of dummy variables (i.e. expected to
+# not be used).
+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
+
+# Argument names that match this expression will be ignored.
+ignored-argument-names=_.*|^ignored_|^unused_
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# List of qualified module names which can have objects that can redefine
+# builtins.
+redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
diff --git a/Pipfile b/Pipfile
index 1199f0c63..42da6f72a 100644
--- a/Pipfile
+++ b/Pipfile
@@ -6,7 +6,7 @@ name = "pypi"
 [dev-packages]
 black = "==22.6.0"
 isort = "==5.13.2"
-pylint = "==2.10.2"
+pylint = "==3.1.0"
 coverage = "~=5.5"
 # api-server
 api-server = {editable = true, path = "./packages/api-server"}
diff --git a/Pipfile.lock b/Pipfile.lock
index 82ad7f3cf..7af923efb 100644
--- a/Pipfile.lock
+++ b/Pipfile.lock
@@ -1,7 +1,7 @@
 {
     "_meta": {
         "hash": {
-            "sha256": "cf70c440075b3bc7b6431b84421a67b1bd917286a3fc336859961c749cbd0ef8"
+            "sha256": "b7b6e862e5191aca7cc5e8c8eb25fc8c0428ab21a7094307abda965ac78f4c83"
         },
         "pipfile-spec": 6,
         "requires": {
@@ -63,11 +63,11 @@
         },
         "astroid": {
             "hashes": [
-                "sha256:3b680ce0419b8a771aba6190139a3998d14b413852506d99aff8dc2bf65ee67c",
-                "sha256:dc1e8b28427d6bbef6b8842b18765ab58f558c42bb80540bd7648c98412af25e"
+                "sha256:951798f922990137ac090c53af473db7ab4e70c770e6d7fae0cec59f74411819",
+                "sha256:ac248253bfa4bd924a0de213707e7ebeeb3138abeb48d798784ead1e56d419d4"
             ],
-            "markers": "python_version ~= '3.6'",
-            "version": "==2.7.3"
+            "markers": "python_full_version >= '3.8.0'",
+            "version": "==3.1.0"
         },
         "bidict": {
             "hashes": [
@@ -382,6 +382,14 @@
             "markers": "python_version >= '3.7' and python_version < '4.0'",
             "version": "==0.25.4"
         },
+        "dill": {
+            "hashes": [
+                "sha256:3ebe3c479ad625c4553aca177444d89b486b1d84982eeacded644afc0cf797ca",
+                "sha256:c36ca9ffb54365bdd2f8eb3eff7d2a21237f8452b57ace88b1ac615b7e815bd7"
+            ],
+            "markers": "python_version < '3.11'",
+            "version": "==0.3.8"
+        },
         "dnspython": {
             "hashes": [
                 "sha256:5ef3b9680161f6fa89daf8ad451b5f1a33b18ae8a1c6778cdf4b43f08c0a6e50",
@@ -526,49 +534,6 @@
             "markers": "python_version >= '3.7'",
             "version": "==3.1.3"
         },
-        "lazy-object-proxy": {
-            "hashes": [
-                "sha256:009e6bb1f1935a62889ddc8541514b6a9e1fcf302667dcb049a0be5c8f613e56",
-                "sha256:02c83f957782cbbe8136bee26416686a6ae998c7b6191711a04da776dc9e47d4",
-                "sha256:0aefc7591920bbd360d57ea03c995cebc204b424524a5bd78406f6e1b8b2a5d8",
-                "sha256:127a789c75151db6af398b8972178afe6bda7d6f68730c057fbbc2e96b08d282",
-                "sha256:18dd842b49456aaa9a7cf535b04ca4571a302ff72ed8740d06b5adcd41fe0757",
-                "sha256:217138197c170a2a74ca0e05bddcd5f1796c735c37d0eee33e43259b192aa424",
-                "sha256:2297f08f08a2bb0d32a4265e98a006643cd7233fb7983032bd61ac7a02956b3b",
-                "sha256:2fc0a92c02fa1ca1e84fc60fa258458e5bf89d90a1ddaeb8ed9cc3147f417255",
-                "sha256:30b339b2a743c5288405aa79a69e706a06e02958eab31859f7f3c04980853b70",
-                "sha256:366c32fe5355ef5fc8a232c5436f4cc66e9d3e8967c01fb2e6302fd6627e3d94",
-                "sha256:3ad54b9ddbe20ae9f7c1b29e52f123120772b06dbb18ec6be9101369d63a4074",
-                "sha256:5ad9e6ed739285919aa9661a5bbed0aaf410aa60231373c5579c6b4801bd883c",
-                "sha256:5faf03a7d8942bb4476e3b62fd0f4cf94eaf4618e304a19865abf89a35c0bbee",
-                "sha256:75fc59fc450050b1b3c203c35020bc41bd2695ed692a392924c6ce180c6f1dc9",
-                "sha256:76a095cfe6045c7d0ca77db9934e8f7b71b14645f0094ffcd842349ada5c5fb9",
-                "sha256:78247b6d45f43a52ef35c25b5581459e85117225408a4128a3daf8bf9648ac69",
-                "sha256:782e2c9b2aab1708ffb07d4bf377d12901d7a1d99e5e410d648d892f8967ab1f",
-                "sha256:7ab7004cf2e59f7c2e4345604a3e6ea0d92ac44e1c2375527d56492014e690c3",
-                "sha256:80b39d3a151309efc8cc48675918891b865bdf742a8616a337cb0090791a0de9",
-                "sha256:80fa48bd89c8f2f456fc0765c11c23bf5af827febacd2f523ca5bc1893fcc09d",
-                "sha256:855e068b0358ab916454464a884779c7ffa312b8925c6f7401e952dcf3b89977",
-                "sha256:92f09ff65ecff3108e56526f9e2481b8116c0b9e1425325e13245abfd79bdb1b",
-                "sha256:952c81d415b9b80ea261d2372d2a4a2332a3890c2b83e0535f263ddfe43f0d43",
-                "sha256:9a3a87cf1e133e5b1994144c12ca4aa3d9698517fe1e2ca82977781b16955658",
-                "sha256:9e4ed0518a14dd26092614412936920ad081a424bdcb54cc13349a8e2c6d106a",
-                "sha256:a899b10e17743683b293a729d3a11f2f399e8a90c73b089e29f5d0fe3509f0dd",
-                "sha256:b1f711e2c6dcd4edd372cf5dec5c5a30d23bba06ee012093267b3376c079ec83",
-                "sha256:b4f87d4ed9064b2628da63830986c3d2dca7501e6018347798313fcf028e2fd4",
-                "sha256:cb73507defd385b7705c599a94474b1d5222a508e502553ef94114a143ec6696",
-                "sha256:dc0d2fc424e54c70c4bc06787e4072c4f3b1aa2f897dfdc34ce1013cf3ceef05",
-                "sha256:e221060b701e2aa2ea991542900dd13907a5c90fa80e199dbf5a03359019e7a3",
-                "sha256:e271058822765ad5e3bca7f05f2ace0de58a3f4e62045a8c90a0dfd2f8ad8cc6",
-                "sha256:e2adb09778797da09d2b5ebdbceebf7dd32e2c96f79da9052b2e87b6ea495895",
-                "sha256:e333e2324307a7b5d86adfa835bb500ee70bfcd1447384a822e96495796b0ca4",
-                "sha256:e98c8af98d5707dcdecc9ab0863c0ea6e88545d42ca7c3feffb6b4d1e370c7ba",
-                "sha256:edb45bb8278574710e68a6b021599a10ce730d156e5b254941754a9cc0b17d03",
-                "sha256:fec03caabbc6b59ea4a638bee5fce7117be8e99a4103d9d5ad77f15d6f81020c"
-            ],
-            "markers": "python_version >= '3.8'",
-            "version": "==1.10.0"
-        },
         "markupsafe": {
             "hashes": [
                 "sha256:00e046b6dd71aa03a41079792f8473dc494d564611a8f89bbbd7cb93295ebdcf",
@@ -637,10 +602,11 @@
         },
         "mccabe": {
             "hashes": [
-                "sha256:ab8a6258860da4b6677da4bd2fe5dc2c659cff31b3ee4f7f5d64e79735b80d42",
-                "sha256:dd8d182285a0fe56bace7f45b5e7d1a6ebcbf524e8f3bd87eb0f125271b8831f"
+                "sha256:348e0240c33b60bbdf4e523192ef919f28cb2c3d7d5c7794f74009290f236325",
+                "sha256:6c2d30ab6be0e4a46919781807b4f0d834ebdd6c6e3dca0bda5a15f863427b6e"
             ],
-            "version": "==0.6.1"
+            "markers": "python_version >= '3.6'",
+            "version": "==0.7.0"
         },
         "mypy-extensions": {
             "hashes": [
@@ -790,12 +756,12 @@
         },
         "pylint": {
             "hashes": [
-                "sha256:6758cce3ddbab60c52b57dcc07f0c5d779e5daf0cf50f6faacbef1d3ea62d2a1",
-                "sha256:e178e96b6ba171f8ef51fbce9ca30931e6acbea4a155074d80cc081596c9e852"
+                "sha256:507a5b60953874766d8a366e8e8c7af63e058b26345cfcb5f91f89d987fd6b74",
+                "sha256:6a69beb4a6f63debebaab0a3477ecd0f559aa726af4954fc948c51f7a2549e23"
             ],
             "index": "pypi",
-            "markers": "python_version ~= '3.6'",
-            "version": "==2.10.2"
+            "markers": "python_full_version >= '3.8.0'",
+            "version": "==3.1.0"
         },
         "pypika-tortoise": {
             "hashes": [
@@ -921,14 +887,6 @@
             "markers": "python_version >= '3.7'",
             "version": "==1.2.1"
         },
-        "setuptools": {
-            "hashes": [
-                "sha256:0ff4183f8f42cd8fa3acea16c45205521a4ef28f73c6391d8a25e92893134f2e",
-                "sha256:c21c49fb1042386df081cb5d86759792ab89efca84cf114889191cd09aacc80c"
-            ],
-            "markers": "python_version >= '3.8'",
-            "version": "==69.2.0"
-        },
         "simple-websocket": {
             "hashes": [
                 "sha256:17d2c72f4a2bd85174a97e3e4c88b01c40c3f81b7b648b0cc3ce1305968928c8",
@@ -950,7 +908,6 @@
                 "sha256:13d429aa93a61dc40bf503e8c801db1f1bca3dc706b10ef2434a36123568f044",
                 "sha256:90a671733cfb35771d8cc605e0b679d23b992f8dcfad48cc60b38cb29aeb7080"
             ],
-            "index": "pypi",
             "markers": "python_version >= '3.8'",
             "version": "==0.36.3"
         },
@@ -959,7 +916,7 @@
                 "sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
                 "sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
             ],
-            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "markers": "python_version < '3.11'",
             "version": "==0.10.2"
         },
         "tomli": {
@@ -967,9 +924,17 @@
                 "sha256:939de3e7a6161af0c887ef91b7d41a53e7c5a1ca976325f429cb46ea9bc30ecc",
                 "sha256:de526c12914f0c550d15924c62d72abc48d6fe7364aa87328337a31007fe8a4f"
             ],
-            "markers": "python_full_version < '3.11.0a7'",
+            "markers": "python_version < '3.11'",
             "version": "==2.0.1"
         },
+        "tomlkit": {
+            "hashes": [
+                "sha256:5cd82d48a3dd89dee1f9d64420aa20ae65cfbd00668d6f094d7578a78efbb77b",
+                "sha256:7ca1cfc12232806517a8515047ba66a19369e71edf2439d0f5824f91032b6cc3"
+            ],
+            "markers": "python_version >= '3.7'",
+            "version": "==0.12.4"
+        },
         "tortoise-orm": {
             "hashes": [
                 "sha256:1891ad935de689ddf002c5c65c864176d28659ab6069e45f0e2cde32359bb8d9",
@@ -1207,12 +1172,6 @@
             ],
             "version": "==12.0"
         },
-        "wrapt": {
-            "hashes": [
-                "sha256:b62ffa81fb85f4332a4f609cab4ac40709470da05643a082ec1eb88e6d9b97d7"
-            ],
-            "version": "==1.12.1"
-        },
         "wsproto": {
             "hashes": [
                 "sha256:ad565f26ecb92588a3e43bc3d96164de84cd9902482b130d0ddbaa9664a85065",
diff --git a/packages/api-server/.pylintrc b/packages/api-server/.pylintrc
deleted file mode 100644
index b06a1ba75..000000000
--- a/packages/api-server/.pylintrc
+++ /dev/null
@@ -1,603 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code.
-extension-pkg-whitelist=pydantic
-
-# Specify a score threshold to be exceeded before program exits with error.
-fail-under=10.0
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS
-
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use.
-jobs=1
-
-# Control the amount of potential inferred values when inferring a single
-# object. This can help the performance when dealing with large functions or
-# complex, nested conditions.
-limit-inference-results=100
-
-# List of plugins (as comma separated values of python module names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages.
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        deprecated-operator-function,
-        deprecated-urllib-function,
-        xreadlines-attribute,
-        deprecated-sys-function,
-        exception-escape,
-        comprehension-escape,
-
-# added disables
-        design,
-        similarities,
-        invalid-name,
-        missing-module-docstring,
-        missing-class-docstring,
-        missing-function-docstring,
-        attribute-defined-outside-init,
-        fixme,
-        logging-fstring-interpolation,
-        line-too-long,
-# fastapi heavily uses singletons, disallowing global statements just ends up with things
-# using nonlocal as singletons which are functionally the same as globals.
-        global-statement,
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'error', 'warning', 'refactor', and 'convention'
-# which contain the number of messages in each category, as well as 'statement'
-# which is the total number of statements analyzed. This score is used by the
-# global evaluation report (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=old
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
-
-
-[BASIC]
-
-# Naming style matching correct argument names.
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style.
-#argument-rgx=
-
-# Naming style matching correct attribute names.
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style.
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma.
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Bad variable names regexes, separated by a comma. If names match any regex,
-# they will always be refused
-bad-names-rgxs=
-
-# Naming style matching correct class attribute names.
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style.
-#class-attribute-rgx=
-
-# Naming style matching correct class names.
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-
-# style.
-#class-rgx=
-
-# Naming style matching correct constant names.
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style.
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names.
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style.
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma.
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Good variable names regexes, separated by a comma. If names match any regex,
-# they will always be accepted
-good-names-rgxs=
-
-# Include a hint for the correct naming format with invalid-name.
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names.
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style.
-#inlinevar-rgx=
-
-# Naming style matching correct method names.
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style.
-#method-rgx=
-
-# Naming style matching correct module names.
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style.
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-# These decorators are taken in consideration only for invalid-name.
-property-classes=abc.abstractproperty
-
-# Naming style matching correct variable names.
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style.
-#variable-rgx=
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module.
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[STRING]
-
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
-
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
-
-# Spelling dictionary name. Available dictionaries: none. To make it work,
-# install the python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-# Regular expression of note tags to take in consideration.
-#notes-rgx=
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore.
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
-
-
-[IMPORTS]
-
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=optparse,tkinter.tix
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled).
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled).
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled).
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method.
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
-
-# Maximum number of branch for function / method body.
-max-branches=12
-
-# Maximum number of locals for function / method body.
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body.
-max-returns=6
-
-# Maximum number of statements in function / method body.
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      __post_init__
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=cls
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "BaseException, Exception".
-overgeneral-exceptions=BaseException,
-                       Exception
diff --git a/packages/api-server/api_server/rmf_io/operators/health.py b/packages/api-server/api_server/rmf_io/operators/health.py
index 6a94a23a3..fd46ab673 100644
--- a/packages/api-server/api_server/rmf_io/operators/health.py
+++ b/packages/api-server/api_server/rmf_io/operators/health.py
@@ -29,6 +29,8 @@ def criticality(health_status: HealthStatus):
             return 1
         if health_status == HealthStatus.DEAD:
             return 2
+        # FIXME
+        # pylint: disable=broad-exception-raised
         raise Exception("unknown health status")
 
     def get_most_critical(health_statuses):
diff --git a/packages/api-server/api_server/test/test_fixtures.py b/packages/api-server/api_server/test/test_fixtures.py
index 788d59bc4..99e30e224 100644
--- a/packages/api-server/api_server/test/test_fixtures.py
+++ b/packages/api-server/api_server/test/test_fixtures.py
@@ -106,6 +106,8 @@ def impl():
 
                 async def handle_resp(emit_room, msg, *_args, **_kwargs):
                     if emit_room == "subscribe" and not msg["success"]:
+                        # FIXME
+                        # pylint: disable=broad-exception-raised
                         raise Exception("Failed to subscribe")
                     if emit_room == room:
                         async with condition:
@@ -115,7 +117,7 @@ async def handle_resp(emit_room, msg, *_args, **_kwargs):
                 mock_sio.emit.side_effect = handle_resp
                 # this is so type narrowing works
                 if self.client.portal is None:
-                    raise Exception(
+                    raise AssertionError(
                         "self.client.portal is None, make sure this is called within a test context"
                     )
 
diff --git a/packages/api-server/api_server/test_sio_auth.py b/packages/api-server/api_server/test_sio_auth.py
index af13f4edd..a47f4085a 100644
--- a/packages/api-server/api_server/test_sio_auth.py
+++ b/packages/api-server/api_server/test_sio_auth.py
@@ -8,7 +8,6 @@
 
 
 class TestSioAuth(AppFixture):
-    # pylint: disable=no-self-use
     def test_token_is_verified(self):
         with patch.object(
             authenticator, "verify_token"
diff --git a/packages/api-server/package.json b/packages/api-server/package.json
index 38f0ee551..5e46d3ea5 100644
--- a/packages/api-server/package.json
+++ b/packages/api-server/package.json
@@ -11,7 +11,7 @@
     "test": "../../scripts/pipenv run python scripts/test.py",
     "test:cov": "../../scripts/pipenv run python -m coverage run scripts/test.py",
     "test:report": "../../scripts/pipenv run python -m coverage html && xdg-open htmlcov/index.html",
-    "lint": "../../scripts/pipenv run pyright && ../../scripts/pipenv run pylint api_server --ignore=ros_pydantic,rmf_api,rmf_ros2",
+    "lint": "../../scripts/pipenv run pyright && ../../scripts/pipenv run pylint --rcfile=../../.pylintrc api_server --ignore=ros_pydantic,rmf_api,rmf_ros2",
     "generate-models": "./generate-models.sh",
     "generate-docs": "RMF_API_SERVER_CONFIG=scripts/docs_config.py ../../scripts/pipenv run python scripts/extract_docs.py -o docs"
   },
diff --git a/packages/ros-translator/.pylintrc b/packages/ros-translator/.pylintrc
deleted file mode 100644
index 4cc9f477f..000000000
--- a/packages/ros-translator/.pylintrc
+++ /dev/null
@@ -1,600 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code.
-extension-pkg-whitelist=pydantic
-
-# Specify a score threshold to be exceeded before program exits with error.
-fail-under=10.0
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS
-
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use.
-jobs=1
-
-# Control the amount of potential inferred values when inferring a single
-# object. This can help the performance when dealing with large functions or
-# complex, nested conditions.
-limit-inference-results=100
-
-# List of plugins (as comma separated values of python module names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages.
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        deprecated-operator-function,
-        deprecated-urllib-function,
-        xreadlines-attribute,
-        deprecated-sys-function,
-        exception-escape,
-        comprehension-escape,
-
-# added disables
-        design,
-        similarities,
-        invalid-name,
-        missing-module-docstring,
-        missing-class-docstring,
-        missing-function-docstring,
-        attribute-defined-outside-init,
-        fixme,
-        logging-fstring-interpolation,
-        line-too-long,
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'error', 'warning', 'refactor', and 'convention'
-# which contain the number of messages in each category, as well as 'statement'
-# which is the total number of statements analyzed. This score is used by the
-# global evaluation report (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=old
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
-
-
-[BASIC]
-
-# Naming style matching correct argument names.
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style.
-#argument-rgx=
-
-# Naming style matching correct attribute names.
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style.
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma.
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Bad variable names regexes, separated by a comma. If names match any regex,
-# they will always be refused
-bad-names-rgxs=
-
-# Naming style matching correct class attribute names.
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style.
-#class-attribute-rgx=
-
-# Naming style matching correct class names.
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-
-# style.
-#class-rgx=
-
-# Naming style matching correct constant names.
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style.
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names.
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style.
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma.
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Good variable names regexes, separated by a comma. If names match any regex,
-# they will always be accepted
-good-names-rgxs=
-
-# Include a hint for the correct naming format with invalid-name.
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names.
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style.
-#inlinevar-rgx=
-
-# Naming style matching correct method names.
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style.
-#method-rgx=
-
-# Naming style matching correct module names.
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style.
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-# These decorators are taken in consideration only for invalid-name.
-property-classes=abc.abstractproperty
-
-# Naming style matching correct variable names.
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style.
-#variable-rgx=
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module.
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[STRING]
-
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
-
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
-
-# Spelling dictionary name. Available dictionaries: none. To make it work,
-# install the python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-# Regular expression of note tags to take in consideration.
-#notes-rgx=
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore.
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
-
-
-[IMPORTS]
-
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=optparse,tkinter.tix
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled).
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled).
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled).
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method.
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
-
-# Maximum number of branch for function / method body.
-max-branches=12
-
-# Maximum number of locals for function / method body.
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body.
-max-returns=6
-
-# Maximum number of statements in function / method body.
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      __post_init__
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=cls
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "BaseException, Exception".
-overgeneral-exceptions=BaseException,
-                       Exception
diff --git a/packages/ros-translator/ros_translator/typescript/.pylintrc b/packages/ros-translator/ros_translator/typescript/.pylintrc
deleted file mode 100644
index ad65af983..000000000
--- a/packages/ros-translator/ros_translator/typescript/.pylintrc
+++ /dev/null
@@ -1,631 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code.
-extension-pkg-allow-list=
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code. (This is an alternative name to extension-pkg-allow-list
-# for backward compatibility.)
-extension-pkg-whitelist=pydantic
-
-# Specify a score threshold to be exceeded before program exits with error.
-fail-under=10.0
-
-# Files or directories to be skipped. They should be base names, not paths.
-ignore=CVS,
-       test
-
-# Files or directories matching the regex patterns are skipped. The regex
-# matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use.
-jobs=1
-
-# Control the amount of potential inferred values when inferring a single
-# object. This can help the performance when dealing with large functions or
-# complex, nested conditions.
-limit-inference-results=100
-
-# List of plugins (as comma separated values of python module names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages.
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=invalid-name,
-        missing-module-docstring,
-        missing-class-docstring,
-        missing-function-docstring,
-        line-too-long,
-        print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        duplicate-code,
-        too-many-ancestors,
-        too-many-instance-attributes,
-        too-few-public-methods,
-        too-many-public-methods,
-        too-many-return-statements,
-        too-many-branches,
-        too-many-arguments,
-        too-many-locals,
-        too-many-statements,
-        too-many-boolean-expressions,
-        attribute-defined-outside-init,
-        fixme,
-        logging-fstring-interpolation,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        deprecated-operator-function,
-        deprecated-urllib-function,
-        xreadlines-attribute,
-        deprecated-sys-function,
-        exception-escape,
-        comprehension-escape
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'error', 'warning', 'refactor', and 'convention'
-# which contain the number of messages in each category, as well as 'statement'
-# which is the total number of statements analyzed. This score is used by the
-# global evaluation report (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=old
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
-
-
-[BASIC]
-
-# Naming style matching correct argument names.
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style.
-#argument-rgx=
-
-# Naming style matching correct attribute names.
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style.
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma.
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Bad variable names regexes, separated by a comma. If names match any regex,
-# they will always be refused
-bad-names-rgxs=
-
-# Naming style matching correct class attribute names.
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style.
-#class-attribute-rgx=
-
-# Naming style matching correct class constant names.
-class-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct class constant names. Overrides class-
-# const-naming-style.
-#class-const-rgx=
-
-# Naming style matching correct class names.
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-
-# style.
-#class-rgx=
-
-# Naming style matching correct constant names.
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style.
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names.
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style.
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma.
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Good variable names regexes, separated by a comma. If names match any regex,
-# they will always be accepted
-good-names-rgxs=
-
-# Include a hint for the correct naming format with invalid-name.
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names.
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style.
-#inlinevar-rgx=
-
-# Naming style matching correct method names.
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style.
-#method-rgx=
-
-# Naming style matching correct module names.
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style.
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-# These decorators are taken in consideration only for invalid-name.
-property-classes=abc.abstractproperty
-
-# Naming style matching correct variable names.
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style.
-#variable-rgx=
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module.
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[STRING]
-
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
-
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
-
-# Spelling dictionary name. Available dictionaries: none. To make it work,
-# install the 'python-enchant' package.
-spelling-dict=
-
-# List of comma separated words that should be considered directives if they
-# appear and the beginning of a comment and should not be checked.
-spelling-ignore-comment-directives=fmt: on,fmt: off,noqa:,noqa,nosec,isort:skip,mypy:
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-# Regular expression of note tags to take in consideration.
-#notes-rgx=
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of names allowed to shadow builtins
-allowed-redefined-builtins=
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore.
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
-
-
-[IMPORTS]
-
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=optparse,tkinter.tix
-
-# Output a graph (.gv or any supported image format) of external dependencies
-# to the given file (report RP0402 must not be disabled).
-ext-import-graph=
-
-# Output a graph (.gv or any supported image format) of all (i.e. internal and
-# external) dependencies to the given file (report RP0402 must not be
-# disabled).
-import-graph=
-
-# Output a graph (.gv or any supported image format) of internal dependencies
-# to the given file (report RP0402 must not be disabled).
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method.
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
-
-# Maximum number of branch for function / method body.
-max-branches=12
-
-# Maximum number of locals for function / method body.
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body.
-max-returns=6
-
-# Maximum number of statements in function / method body.
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# Warn about protected attribute access inside special methods
-check-protected-access-in-special-methods=no
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      __post_init__
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=cls
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "BaseException, Exception".
-overgeneral-exceptions=BaseException,
-                       Exception
diff --git a/scripts/base.pylintrc b/scripts/base.pylintrc
deleted file mode 100644
index 4cc9f477f..000000000
--- a/scripts/base.pylintrc
+++ /dev/null
@@ -1,600 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code.
-extension-pkg-whitelist=pydantic
-
-# Specify a score threshold to be exceeded before program exits with error.
-fail-under=10.0
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS
-
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use.
-jobs=1
-
-# Control the amount of potential inferred values when inferring a single
-# object. This can help the performance when dealing with large functions or
-# complex, nested conditions.
-limit-inference-results=100
-
-# List of plugins (as comma separated values of python module names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages.
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        deprecated-operator-function,
-        deprecated-urllib-function,
-        xreadlines-attribute,
-        deprecated-sys-function,
-        exception-escape,
-        comprehension-escape,
-
-# added disables
-        design,
-        similarities,
-        invalid-name,
-        missing-module-docstring,
-        missing-class-docstring,
-        missing-function-docstring,
-        attribute-defined-outside-init,
-        fixme,
-        logging-fstring-interpolation,
-        line-too-long,
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'error', 'warning', 'refactor', and 'convention'
-# which contain the number of messages in each category, as well as 'statement'
-# which is the total number of statements analyzed. This score is used by the
-# global evaluation report (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=old
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
-
-
-[BASIC]
-
-# Naming style matching correct argument names.
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style.
-#argument-rgx=
-
-# Naming style matching correct attribute names.
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style.
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma.
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Bad variable names regexes, separated by a comma. If names match any regex,
-# they will always be refused
-bad-names-rgxs=
-
-# Naming style matching correct class attribute names.
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style.
-#class-attribute-rgx=
-
-# Naming style matching correct class names.
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-
-# style.
-#class-rgx=
-
-# Naming style matching correct constant names.
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style.
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names.
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style.
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma.
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Good variable names regexes, separated by a comma. If names match any regex,
-# they will always be accepted
-good-names-rgxs=
-
-# Include a hint for the correct naming format with invalid-name.
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names.
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style.
-#inlinevar-rgx=
-
-# Naming style matching correct method names.
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style.
-#method-rgx=
-
-# Naming style matching correct module names.
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style.
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-# These decorators are taken in consideration only for invalid-name.
-property-classes=abc.abstractproperty
-
-# Naming style matching correct variable names.
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style.
-#variable-rgx=
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module.
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[STRING]
-
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
-
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
-
-# Spelling dictionary name. Available dictionaries: none. To make it work,
-# install the python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-# Regular expression of note tags to take in consideration.
-#notes-rgx=
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore.
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
-
-
-[IMPORTS]
-
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=optparse,tkinter.tix
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled).
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled).
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled).
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method.
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
-
-# Maximum number of branch for function / method body.
-max-branches=12
-
-# Maximum number of locals for function / method body.
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body.
-max-returns=6
-
-# Maximum number of statements in function / method body.
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      __post_init__
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=cls
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "BaseException, Exception".
-overgeneral-exceptions=BaseException,
-                       Exception
diff --git a/scripts/generate-pylintrc.js b/scripts/generate-pylintrc.js
deleted file mode 100644
index e45a510f4..000000000
--- a/scripts/generate-pylintrc.js
+++ /dev/null
@@ -1,20 +0,0 @@
-/**
- * Unlike eslint, pylint does not support inheriting of configs. It does however support generating
- * config based on command line args, which can include the --rcfile args, this allows us to
- * do pseudo inheritance by generating the .pylintrc files with this script.
- */
-const { execSync } = require('child_process');
-const fs = require('fs');
-
-fs.copyFileSync(`${__dirname}/base.pylintrc`, `${__dirname}/../packages/api-server/.pylintrc`);
-fs.copyFileSync(`${__dirname}/base.pylintrc`, `${__dirname}/../packages/ros-translator/.pylintrc`);
-let result = execSync(
-  `pipenv run pylint --rcfile=${__dirname}/base.pylintrc --ignore=CVS,test --generate-rcfile`,
-  {
-    stdio: ['inherit', 'pipe', 'inherit'],
-  },
-);
-fs.writeFileSync(
-  `${__dirname}/../packages/ros-translator/ros_translator/typescript/.pylintrc`,
-  result,
-);