vimcat

#!/bin/sh
version_tag=2.06

# FIND REAL PARENT DIRECTORY
link=$0

while [ -h "$link" ]; do
    ls0=`ls -l "$link"`
    new_link=`expr "$ls0" : '.* -> \(.*\)$'`
    if expr "$new_link" : '/.*' > /dev/null; then
        link=$new_link
    else
        link=`dirname "$link"`/$new_link
    fi
done

project_dir=`dirname "$link"`
# END OF FIND REAL PARENT DIRECTORY

. "$project_dir/inc/prologue.sh"

[ -n "$ZSH_VERSION" ] && emulate -R sh 2>/dev/null # force zsh into full POSIX

version="$(cd "$project_dir" && git describe 2>/dev/null) (git)" || version="$version_tag (checkout)"
runtime=$project_dir

if [ -n "$VIMPAGER_VIM" ]; then
    vim=$VIMPAGER_VIM
elif command -v vim.basic >/dev/null; then
    vim=vim.basic
elif command -v vim >/dev/null; then
    vim=vim
elif command -v nvim >/dev/null; then
    vim=nvim
else
    echo "$0: neither vim nor nvim found, vim or nvim is required for vimcat" >&2
    exit 1
fi

tab_stop=8

# Do not interact with X server in any way (fixes bug #255 with clobbering
# selection buffer and clipboard.)
unset DISPLAY

quit() {
    (
        kill "$vim_pid" >/dev/null 2>&1
        do_sleep 100
        kill -9 "$vim_pid" >/dev/null 2>&1

        kill "$pipeline_pid" >/dev/null 2>&1
        do_sleep 100
        kill -9 "$pipeline_pid" >/dev/null 2>&1

        kill "$tail_pid" >/dev/null 2>&1
        do_sleep 100
        if [ -f "${tmp_dir}/cat_pid" ]; then
            cat_pid=$(cat "${tmp_dir}/cat_pid")
            kill "$cat_pid" >/dev/null 2>&1
            do_sleep 100
            kill -9 "$cat_pid" >/dev/null 2>&1
        fi
        kill -9 "$tail_pid" >/dev/null 2>&1

        cd "${tmp_dir%/*}" 2>/dev/null # some systems cannot remove CWD

        rm -rf "$tmp_dir" 2>/dev/null # rm -rf "" shows error on OpenBSD
    ) &

    # Terminal settings may get screwed up.
    if [ -n "$OLDSTTY" ]; then
        stty "$OLDSTTY" 2>/dev/null >/dev/tty
    fi

    [ $tab_stop -ne 8 ] && tabs -8 2>/dev/null >/dev/tty

    exit "$@"
}

do_sleep() {
    _ms=${1:-100}
    "$vim" -NEnR -i NONE -u NONE +"sleep $_ms m" +q >/dev/null 2>&1
}

usage() {
    cat <<'EOF'
Usage: vimcat [OPTION]... [FILE | -]...
Display FILE(s) in the terminal with (n)vim syntax highlighting using ANSI escape codes.

With no FILE, or when FILE is -, read standard input.

  -h, --help, --usage                This help screen.
  -v, --version                      Show version information and exit.
  -n                                 Print with line numbers.
  -s                                 Squeeze multiple blank lines into one.
  -o FILE | -                        Output ANSI highlighted text to FILE or standard output.
  -t seconds                         Scroll time in seconds (e.g: 1, 5, 0.4)
  --cmd COMMAND                      Run (n)vim COMMAND before initialization.
  -c COMMAND                         Run (n)vim COMMAND after initialization.
  -u FILE                            Use FILE as the vimrc.
  -x                                 Give debugging output on stderr.

Examples:
  vimcat program.py                  # output program.py with highlighting to terminal

Project homepage: <http://github.com/rkitover/vimpager>
and documentation: <https://github.com/rkitover/vimpager/blob/master/markdown/vimcat.md>
or available locally via: man vimcat
EOF
}

write_chunks() {
    cd "$chunks_dir"
    rm -f -- *
    split -b 4096 -
    touch PIPELINE_DONE
}

start_pipeline() {
    if [ -n "$pipeline" ]; then
        pipeline="$pipeline | write_chunks"
    else
        pipeline=write_chunks
    fi
    cat -- "$pipeline_start" | (eval "$pipeline" <&3 & echo $! > "$tmp_dir/pipeline_pid") 3<&0
    pipeline_pid=$(cat "$tmp_dir/pipeline_pid")
}

start_highlight_job() {
    # INSERT VIMCAT_DEBUG PREPARATION HERE
    set -- -NEn -i NONE \
        --cmd "set runtimepath^=$runtime" \
        --cmd "call vimcat#Init({ 'rc': '$vimcatrc' })" \
        --cmd visual \
        ${extra_cmd:+--cmd "$extra_cmd"} \
        ${extra_c:+-c "$extra_c"} \
        -c "call vimcat#Run(\"$dest_file\", ${line_numbers:-0}, \"$chunks_dir\", \"$pipeline_start\")"

    [ -n "$vimcatrc" ] && set -- "$@" -u "$vimcatrc"

    if [ "${VIMCAT_DEBUG:-0}" -eq 0 ]; then
        ("$vim" "$@" </dev/tty >/dev/null 2>&1; touch "$tmp_dir/vim_done") &
        vim_pid=$!
    else
        "$vim" "$@" </dev/tty
        touch "$tmp_dir/vim_done"
    fi
}

squeeze_blank_lines() {
    sed '/^[ 	]*$/{
        N
        /^[ 	]*\n[ 	]*$/D
    }'
}

read_vim_settings() {
    i=1
    OLDIFS=$IFS
    IFS='
'
    for var in $(IFS=$OLDIFS; "$vim" -NEnR ${vimcatrc:+-u "$vimcatrc"} ${extra_cmd:+--cmd "$extra_cmd"} ${extra_c:+-c "$extra_c"} -i NONE +'
        let g:tab_stop = 8
        if ! &et
            let g:tab_stop = &ts
        endif
        call writefile([""] + map([g:tab_stop], "\"VAL:\".v:val"), "/dev/stderr")
        quit
    ' </dev/tty 2>&1 >/dev/null); do
        case "$var" in
            VAL:*)
                case $i in
                    1)
                        tab_stop=${var#VAL:}
                        break
                        ;;
                esac
                i=$((i + 1))
                ;;
        esac
    done
    IFS=$OLDIFS
}

# if no args and stdin is on a terminal, pretend we're cat and wait on stdin.
if [ $# -eq 0 -a -t 0 ]; then
    exec cat
fi

# check for -h before main option parsing, this is much faster
for arg in "$@"; do
    case "$arg" in
        "-h"|"--help"|"-help"|"--usage"|"-usage")
            usage
            quit 0
            ;;
        "-v"|"--version"|"-version")
            echo "vimcat $version"
            quit 0
            ;;
        "-x")
            set -x
            ;;
    esac
done

tmp_dir=${TMPDIR:-/tmp}
mkdir_options="-m 700"

case "$(uname -s)" in
    MINGW*|MSYS*)
        if [ -n "$temp" ]; then
            # MSYS2 is a little tricky, we're gonna stick to the user's private temp
            # the -m mode switch to mkdir doesn't work
            tmp_dir=$(cygpath --unix "$temp")
            mkdir_options=
        fi
        ;;
esac

tmp_dir=$tmp_dir/vimcat_$$

if ! mkdir $mkdir_options "$tmp_dir"; then
    echo "Could not create temporary directory $tmp_dir" >&2
    exit 1
fi

trap 'quit 1' PIPE HUP INT QUIT ILL TRAP KILL BUS TERM
tmp_file_in=$tmp_dir/vimcat_in.txt
out_fifo=$tmp_dir/vimcat_out.fifo

mkfifo "$out_fifo"

# check for arguments
while [ $# -gt 0 ] ; do
    case "$1" in
        "-c")
            shift
            if [ -z "$extra_c" ]; then
                extra_c=$1
            else
                extra_c="$extra_c | $1"
            fi
            shift
            ;;
        "--cmd")
            shift
            if [ -z "$extra_cmd" ]; then
                extra_cmd=$1
            else
                extra_cmd="$extra_cmd | $1"
            fi
            shift
            ;;
        "-u")
            shift
            vimcatrc=$1
            shift
            ;;
        "-o")
            shift
            output_file=$1
            shift
            ;;
        "-t")
            shift
            scroll_time=$1
            shift
            ;;
        "-s")
            shift
            squeeze_blank_lines=1
            ;;
        "-n")
            shift
            line_numbers=1
            ;;
        "-x")
            # xtrace should already be set by the first option parsing
            shift
            ;;
        "--")
            shift
            break
            ;;
        -)
            break
            ;;
        -*)
            echo "$0: bad option '$1', see --help for usage." >&2
            quit 1
            ;;
        *)
            break
            ;;
    esac
done

# Check for directories in args.
for arg; do
    [ -d "$arg" ] && echo "$0: '$arg' is a directory" && quit 1
done

# Just pass through if not on a tty, unless -o was given
if [ -z "$output_file" ]; then
    if [ ! -t 1 ]; then
        exec cat "$@"
    fi
fi

if [ -z "$vimcatrc" ]; then
    if [ -f ~/.vimcatrc ]; then
        vimcatrc=~/.vimcatrc
    else
        vimcatrc=
    fi
fi

if [ $# -eq 0 ]; then
    set -- -
fi

if [ -n "$output_file" -a $# -gt 1 ]; then
    echo "$0: -o can only be used with one input file or stdin." >&2
    quit 1
fi

# Save terminal settings to restore on quit.
OLDSTTY=$(stty -g 2>/dev/null </dev/tty)

read_vim_settings

chunks_dir=$tmp_dir/chunks
mkdir "$chunks_dir"

i=1
for file in "$@"
do
    if [ $# -ge 2 ]; then
        if [ $i -gt 1 ]; then
            printf '\n'
        fi
        printf "==> %s <==\n\n" "$file"
    fi

    pipeline=
    pipeline_start=$file

    if [ "${squeeze_blank_lines:-0}" -eq 1 ]; then
        pipeline=squeeze_blank_lines
    fi

    exit_code=0

    # Check that the file is readable
    if [ "$file" != - ]; then
        if [ ! -r "$file" ]; then
            echo "$0: Cannot read file: $file" >&2
            exit_code=1
        fi

        [ ! -s "$file" ] && continue
    fi

    if [ -z "$output_file" -o "$output_file" = "-" ]; then
        dest_file=$out_fifo

        (
            if [ $tab_stop -ne 8 ]; then
                stty tab0         2>/dev/null >/dev/tty
                tabs -${tab_stop} 2>/dev/null >/dev/tty
            fi
            while :; do
                [ ! -z "$scroll_time" ] && sleep ${scroll_time}
                cat "$out_fifo" & cat_pid=$!
                echo ${cat_pid} > "${tmp_dir}/cat_pid"
                wait ${cat_pid}
            done
        ) &
        tail_pid=$!
    else
        dest_file=$output_file
        printf '' > "$dest_file"
    fi

    start_highlight_job
    start_pipeline
    while [ ! -f "$tmp_dir/vim_done" ]; do
        do_sleep 50
    done

    if [ -n "$tail_pid" ]; then
        # if it's not a fifo where this doesn't work, tail needs some time to catch up
        [ ! -p "$out_fifo" ] && do_sleep 1100

        kill $tail_pid >/dev/null 2>&1
    fi

    i=$((i + 1))
done

quit $exit_code

# vim: sw=4 et ft=sh