diff --git a/docs/appendix/glossary.md b/docs/appendix/glossary.md index dcd942dcd..b57bd2558 100644 --- a/docs/appendix/glossary.md +++ b/docs/appendix/glossary.md @@ -333,6 +333,20 @@ associated with a specific quantity ([quantity specification](#quantity_spec) and [unit](#unit)). +[`canonical representation of a unit, canonical unit`](#canonical-unit){ #canonical-unit } + +: - A canonical representation of a unit consists of: + - a reference unit being the result of extraction of all the intermediate + [derived units](#derived-unit), + - a magnitude being a product of all the prefixes and magnitudes of extracted scaled units. + - All units having the same canonical unit are deemed equal. + - All units having the same reference unit are convertible + (their magnitude may differ and is used during conversion). + +[`reference unit`](#reference-unit){ #reference-unit } + +: See [canonical representation of a unit](#canonical-unit) + [`absolute quantity point origin`, `absolute point origin`](#absolute-point-origin){ #absolute-point-origin } : - An explicit point on an axis of values of a specific [quantity](#quantity) type that serves diff --git a/docs/users_guide/framework_basics/design_overview.md b/docs/users_guide/framework_basics/design_overview.md index a2f8ebf3b..4dec871cd 100644 --- a/docs/users_guide/framework_basics/design_overview.md +++ b/docs/users_guide/framework_basics/design_overview.md @@ -19,7 +19,7 @@ flowchart TD quantity_character["Quantity character"] --- QuantitySpec QuantitySpec --- Reference["Quantity reference"] Reference --- Quantity - quantity_character --- Representation + quantity_character -.- Representation Representation --- Quantity Quantity --- QuantityPoint["Quantity point"] PointOrigin["Point origin"] --- QuantityPoint diff --git a/docs/users_guide/framework_basics/simple_and_typed_quantities.md b/docs/users_guide/framework_basics/simple_and_typed_quantities.md index 0e9ea1cd6..eddd5489e 100644 --- a/docs/users_guide/framework_basics/simple_and_typed_quantities.md +++ b/docs/users_guide/framework_basics/simple_and_typed_quantities.md @@ -1,16 +1,18 @@ # Simple and Typed Quantities -ISO specifies a quantity as: +ISO defines a quantity as: !!! quote - property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference + property of a phenomenon, body, or substance, where the property has a magnitude + that can be expressed as a number and a reference After that, it says: !!! quote - A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such. + A reference can be a measurement unit, a measurement procedure, a reference material, + or a combination of such. ## `quantity` class template @@ -22,9 +24,10 @@ template` being instantiated. +The above example results in the following type `reference` being instantiated. -Based on this property, the **mp-units** library provides two modes of dealing with quantities. +As we have two alternative options that satisfy the `Reference` concept in the **mp-units** library, +we also have two modes of dealing with quantities. ## Simple quantities @@ -85,7 +89,7 @@ A car driving 110 km in 2 h has an average speed of 15.2778 m/s (55 km/h) !!! example "[Try it on Compiler Explorer](https://godbolt.org/z/zWe8ecf93)" -### Easy to understand compilation error messages +### Easy-to-understand compilation error messages In case a user makes an error in a quantity equation and the result of the calculation will not match the function return type, the compiler will detect such an issue at @@ -175,7 +179,7 @@ As we can see above, the compilation error is longer but still relatively easy t Based on the previous example, it might seem that typed quantities are not that useful, more to type and provide harder-to-understand error messages. It might be true in some cases, -but there are cases where they provide an additional level of safety. +but there are scenarios where they offer an additional level of safety. Let's see another example: @@ -292,7 +296,7 @@ Let's see another example: In the above example, the highlighted call doesn't look that safe anymore in the case of simple quantities, right? Suppose someone, either by mistake or due to some refactoring, -will call the function with invalid order of arguments. In that case, the program will compile +will call the function with an invalid order of arguments. In that case, the program will compile fine but not work as expected. Let's see what will happen if we reorder the arguments in the case of typed quantities: @@ -303,7 +307,7 @@ auto tank = RectangularStorageTank(horizontal_length(1'000 * mm), isq::width(500 * mm)); ``` -This time a compiler provides the following compilation error: +This time, a compiler provides the following compilation error: ```text In function 'int main()': @@ -319,7 +323,7 @@ note: no known conversion for argument 2 from 'mp_units::quantity(radius)` can't be converted to `horizontal_area` as well. +As `isq::radius` is not convertible to `horizontal_length`, the derived quantity of +`pow<2>(radius)` can't be converted to `horizontal_area` as well. It would be unsafe to allow such a conversion as not all of the circles lie flat on the ground, right? In such a case, the user has to explicitly force such an unsafe conversion with the help of a `quantity_cast()`. This function name is easy to spot in code reviews or while -searching the project for problems if something goes sideways. In case of unexpected issues -related to quantities, this should be the first function to look for. +searching the project for problems if something goes sideways. In case of unexpected +quantities-related issues, this should be the first function to look for. !!! tip @@ -397,7 +401,7 @@ related to quantities, this should be the first function to look for. In case you wonder which mode you should choose for your project, we have good news for you. Simple and typed quantity modes can be freely mixed with each other. When you use different -quantities of the same kind (e.g. radius, wavelength, altitude, ...), you should probably +quantities of the same kind (e.g., _radius_, _wavelength_, _altitude_, ...), you should probably reach for typed quantities to bring additional safety for those cases. Otherwise, just use simple mode for the remaining quantities. The **mp-units** library will do its best to protect your project based on the information provided. diff --git a/docs/users_guide/framework_basics/systems_of_quantities.md b/docs/users_guide/framework_basics/systems_of_quantities.md index 050269a1c..080972bb3 100644 --- a/docs/users_guide/framework_basics/systems_of_quantities.md +++ b/docs/users_guide/framework_basics/systems_of_quantities.md @@ -33,10 +33,10 @@ Box my_box(2 * m, 3 * m, 1 * m); How do you like such an interface? It turns out that in most existing strongly-typed libraries this is often the best we can do :woozy_face: -Another typical question many users ask is how to deal with energy and moment of force. +Another typical question many users ask is how to deal with _work_ and _torque_. Both of those have the same dimension but are different quantities. -Another question is what should be the result of: +A similar issue is related to figuring out what should be the result of: ```cpp auto res = 1 * Hz + 1 * Bq + 1 * Bd; @@ -44,20 +44,27 @@ auto res = 1 * Hz + 1 * Bq + 1 * Bd; where: -- `Hz` (hertz) - unit of frequency -- `Bq` (becquerel) - unit of activity -- `Bd` (baud) - unit of modulation rate +- `Hz` (hertz) - unit of _frequency_ +- `Bq` (becquerel) - unit of _activity_ +- `Bd` (baud) - unit of _modulation rate_ All of those quantities have the same dimension, namely $\mathsf{T}^{-1}$, but probably it is not wise to allow adding, subtracting, or comparing them, as they describe vastly different physical properties. +If the above example seems too abstract, let's consider a _fuel consumption_ (fuel _volume_ +divided by _distance_, e.g., `6.7 l/km`) and an _area_. Again, both have the same dimension +$\mathsf{L}^{2}$, but probably it wouldn't be wise to allow adding, subtracting, or comparing +a _fuel consumption_ of a car and the _area_ of a football field. Such an operation does not +have any physical sense and should fail to compile. + !!! important More than one quantity may be defined for the same dimension: - - quantities of _different kinds_ (e.g. frequency, modulation rate, activity, ...) - - quantities of _the same kind_ (e.g. length, width, altitude, distance, radius, wavelength, position vector, ...) + - quantities of **different kinds** (e.g. _frequency_, _modulation rate_, _activity_, ...) + - quantities of **the same kind** (e.g. _length_, _width_, _altitude_, _distance_, _radius_, + _wavelength_, _position vector_, ...) It turns out that the above issues can't be solved correctly without proper modeling of a [system of quantities](../../appendix/glossary.md#system-of-quantities). @@ -76,7 +83,7 @@ a [system of quantities](../../appendix/glossary.md#system-of-quantities). dimension** - Quantities of the **same dimension are not necessarily of the same kind** -The above quotes from ISO 80000 answer to all the issues above. Two quantities can't be +The above quotes from ISO 80000 provide answers to all the issues above. Two quantities can't be added, subtracted, or compared unless they belong to the same [kind](../../appendix/glossary.md#kind). As frequency, activity, and modulation rate are different kinds, the expression provided above should not compile. @@ -106,11 +113,12 @@ flowchart TD radius --- radius_of_curvature ``` -Each of the above quantities expresses some kind of length, and each can be measured with `si::metre`. -However, each of them has different properties, usage, and sometimes even a different +Each of the above quantities expresses some kind of _length_, and each can be measured with `si::metre`. +However, each of them has different properties, usage, and sometimes even requires a different representation type (notice that `position_vector` and `displacement` are vector quantities). -Analyzing such a hierarchy can help us in defining arithmetics and conversion rules. +Such a hierarchy helps us in defining arithmetics and conversion rules for various quantities of +the same kind. ## Defining quantities @@ -206,14 +214,14 @@ For example, here is how the above quantity kind tree can be modeled in the libr ## Comparing, adding, and subtracting quantities -ISO 80000 explicitly states that `width` and `height` are quantities of the same kind, and as such they: +ISO 80000 explicitly states that _width_ and _height_ are quantities of the same kind, and as such they: -- are mutually comparable -- can be added and subtracted +- are mutually comparable, +- can be added and subtracted. If we take the above for granted, the only reasonable result of `1 * width + 1 * height` is `2 * length`, -where the result of `length` is known as a common quantity type. A result of such an equation is always -the first common branch in a hierarchy tree of the same kind. For example: +where the result of `length` is known as a **common quantity** type. A result of such an equation is always +the first common node in a hierarchy tree of the same kind. For example: ```cpp static_assert(common_quantity_spec(isq::width, isq::height) == isq::length); @@ -228,33 +236,33 @@ Based on the same hierarchy of quantities of kind length, we can define quantity 1. **Implicit conversions** - - every `width` is a `length` - - every `radius` is a `width` + - every _width_ is a _length_ + - every _radius_ is a _width_ ```cpp static_assert(implicitly_convertible(isq::width, isq::length)); - static_assert(implicitly_convertible(isq::radius, isq::length)); static_assert(implicitly_convertible(isq::radius, isq::width)); + static_assert(implicitly_convertible(isq::radius, isq::length)); ``` 2. **Explicit conversions** - - not every `length` is a `width` - - not every `width` is a `radius` + - not every _length_ is a _width_ + - not every _width_ is a _radius_ ```cpp static_assert(!implicitly_convertible(isq::length, isq::width)); - static_assert(!implicitly_convertible(isq::length, isq::radius)); static_assert(!implicitly_convertible(isq::width, isq::radius)); + static_assert(!implicitly_convertible(isq::length, isq::radius)); static_assert(explicitly_convertible(isq::length, isq::width)); - static_assert(explicitly_convertible(isq::length, isq::radius)); static_assert(explicitly_convertible(isq::width, isq::radius)); + static_assert(explicitly_convertible(isq::length, isq::radius)); ``` 3. **Explicit casts** - - `height` is not a `width` - - both `height` and `width` are quantities of kind `length` + - _height_ is not a _width_ + - both _height_ and _width_ are quantities of kind _length_ ```cpp static_assert(!implicitly_convertible(isq::height, isq::width)); @@ -264,7 +272,7 @@ Based on the same hierarchy of quantities of kind length, we can define quantity 4. **No conversion** - - `time` has nothing in common with `length` + - _time_ has nothing in common with _length_ ```cpp static_assert(!implicitly_convertible(isq::time, isq::length)); @@ -286,12 +294,12 @@ The below presents some arbitrary hierarchy of derived quantities of kind energy ```mermaid flowchart TD - energy["energy\n(mass * length^2 / time^2)"] + energy["energy\n(mass * length2 / time2)"] energy --- mechanical_energy mechanical_energy --- potential_energy potential_energy --- gravitational_potential_energy["gravitational_potential_energy\n(mass * acceleration_of_free_fall * height)"] - potential_energy --- elastic_potential_energy["elastic_potential_energy\n(spring_constant * amount_of_compression^2)"] - mechanical_energy --- kinetic_energy["kinetic_energy\n(mass * speed^2)"] + potential_energy --- elastic_potential_energy["elastic_potential_energy\n(spring_constant * amount_of_compression2)"] + mechanical_energy --- kinetic_energy["kinetic_energy\n(mass * speed2)"] energy --- enthalpy enthalpy --- internal_energy[internal_energy, thermodynamic_energy] internal_energy --- Helmholtz_energy[Helmholtz_energy, Helmholtz_function] @@ -301,21 +309,21 @@ flowchart TD Notice, that even though all of those quantities have the same dimension and can be expressed in the same units, they have different [quantity equations](../../appendix/glossary.md#quantity-equation) -used to create them implicitly: +that can be used to create them implicitly: -- `energy` is the most generic one and thus can be created from base quantities of `mass`, `length`, - and `time`. As those are also the roots of quantities of their kinds and all other quantities are - implicitly convertible to them (we agreed on that "every `width` is a `length`" already), it means - that an `energy` can be implicitly constructed from any quantity of mass, length, and time. +- _energy_ is the most generic one and thus can be created from base quantities of _mass_, _length_, + and _time_. As those are also the roots of quantities of their kinds and all other quantities from their + trees are implicitly convertible to them (we agreed on that "every _width_ is a _length_" already), + it means that an _energy_ can be implicitly constructed from any quantity of _mass_, _length_, and _time_: ```cpp static_assert(implicitly_convertible(isq::mass * pow<2>(isq::length) / pow<2>(isq::time), isq::energy)); static_assert(implicitly_convertible(isq::mass * pow<2>(isq::height) / pow<2>(isq::time), isq::energy)); ``` -- `mechanical_energy` is a more "specialized" quantity than `energy` (not every `energy` is - a `mechanical_energy`). It is why an explicit cast is needed to convert from either `energy` or - the results of its [quantity equation](../../appendix/glossary.md#quantity-equation). +- _mechanical energy_ is a more "specialized" quantity than _energy_ (not every _energy_ is + a _mechanical energy_). It is why an explicit cast is needed to convert from either _energy_ or + the results of its [quantity equation](../../appendix/glossary.md#quantity-equation): ```cpp static_assert(!implicitly_convertible(isq::energy, isq::mechanical_energy)); @@ -326,10 +334,10 @@ used to create them implicitly: isq::mechanical_energy)); ``` -- `gravitational_potential_energy` is not only even more specialized one but additionally, +- _gravitational potential energy_ is not only even more specialized one but additionally, it is special in a way that it provides its own "constrained" [quantity equation](../../appendix/glossary.md#quantity-equation). Maybe not every - `mass * pow<2>(length) / pow<2>(time)` is a `gravitational_potential_energy`, but every + `mass * pow<2>(length) / pow<2>(time)` is a _gravitational potential energy_, but every `mass * acceleration_of_free_fall * height` is. ```cpp @@ -372,7 +380,7 @@ Additionally, the result of operations on quantity kinds is also a quantity kind static_assert(same_type / kind_of, kind_of>); ``` -However, if at least one equation's operand is not a kind, the result becomes a "strong" +However, if at least one equation's operand is not a quantity kind, the result becomes a "strong" quantity where all the kinds are converted to the hierarchy tree's root quantities: ```cpp diff --git a/docs/users_guide/framework_basics/systems_of_units.md b/docs/users_guide/framework_basics/systems_of_units.md index 3e3d2f29e..882c8acbb 100644 --- a/docs/users_guide/framework_basics/systems_of_units.md +++ b/docs/users_guide/framework_basics/systems_of_units.md @@ -7,14 +7,14 @@ quantities and provide automated conversion factors between various compatible u Probably all the libraries in the wild model the [SI](../../appendix/glossary.md#si) and many of them provide support for additional units belonging to various other systems -(e.g. imperial). +(e.g., imperial, cgs, etc). ## Systems of Units are based on Systems of Quantities [Systems of quantities](../../appendix/glossary.md#system-of-quantities) specify a set of quantities and equations relating to those quantities. Those equations do not take any -unit or a numerical representation into account at all. In order to create a quantity, +unit or a numerical representation into account at all. To create a quantity, we need to add those missing pieces of information. This is where a [system of units](../../appendix/glossary.md#system-of-units) kicks in. @@ -33,14 +33,14 @@ inline constexpr struct metre : named_unit<"m", kind_of> {} metre; The `kind_of` above states explicitly that this unit has an associated quantity kind. In other words, `si::metre` (and scaled units based - on it) can be used to express the amount of any quantity of kind length. + on it) can be used to express the amount of any quantity of kind _length_. ## Units compose -One of the strongest points of the [SI](../../appendix/glossary.md#si) system +One of the most vital points of the [SI](../../appendix/glossary.md#si) system is that its units compose. This allows providing thousands of different units for -hundreds of various quantities with a really small set of predefined units +hundreds of various quantities with a tiny set of predefined units and prefixes. The same is modeled in the **mp-units** library, which also allows composing @@ -51,9 +51,9 @@ predefined units to create a nearly infinite number of different quantity q; ``` -to express a quantity of speed. The resulting quantity type is implicitly inferred +to express a quantity of _speed_. The resulting quantity type is implicitly inferred from the [unit equation](../../appendix/glossary.md#unit-equation) by repeating -exactly the same operations on the associated quantity kinds. +the same operations on the associated quantity kinds. ## Many shades of the same unit @@ -64,13 +64,13 @@ The [SI](../../appendix/glossary.md#si) provides the names for 22 common Each such named [derived unit](../../appendix/glossary.md#derived-unit) is a result of a specific predefined [unit equation](../../appendix/glossary.md#unit-equation). -For example, a unit of power quantity is defined in the library as: +For example, a unit of _power_ quantity is defined in the library as: ```cpp inline constexpr struct watt : named_unit<"W", joule / second> {} watt; ``` -However, a power quantity can be expressed in other units as well. For example, +However, a _power_ quantity can be expressed in other units as well. For example, the following: ```cpp @@ -96,23 +96,26 @@ All of the above quantities are equivalent and mean exactly the same. ## Constraining a derived unit to work only with a specific derived quantity Some derived units are valid only for specific derived quantities. For example, -SI specifies both `hertz` and `becquerel` derived units with the same unit equation `1 / s`. -However, it also explicitly states: +[SI](../../appendix/glossary.md#si) specifies both `hertz` and `becquerel` derived units +with the same unit equation `1 / s`. However, it also explicitly states: !!! quote "SI Brochure" The hertz shall only be used for periodic phenomena and the becquerel shall only be used for stochastic processes in activity referred to a radionuclide. -The library allows constraining such units in the following way: +The above means that the usage of `becquerel` as a unit of a _frequency_ quantity is an error. + +The library allows constraining such units to work only with quantities of a specific kind in +the following way: ```cpp inline constexpr struct hertz : named_unit<"Hz", one / second, kind_of> {} hertz; inline constexpr struct becquerel : named_unit<"Bq", one / second, kind_of> {} becquerel; ``` -With the above, `hertz` can only be used for frequencies while becquerel should only be used for -quantities of activity. This means that the following equation will not compile: +With the above, `hertz` can only be used with _frequencies_, while `becquerel` should only be used with +quantities of _activity_. This means that the following equation will not compile: ```cpp auto q = 1 * Hz + 1 * Bq; // Fails to compile @@ -131,7 +134,7 @@ Implementation of `std::ratio` provided by all major compilers is able to expres 16 of them. This is why, in the **mp-units**, we had to find an alternative way to represent unit magnitude in a more flexible way. -Each prefix is implemented as: +Each prefix is implemented similarly to the following: ```cpp template struct quecto_ : prefixed_unit<"q", mag_power<10, -30>, U> {}; @@ -145,7 +148,7 @@ way: inline constexpr auto qm = quecto; ``` -The usage of `mag_power` not only enables providing support for SI prefixes but it can also +The usage of `mag_power` not only enables providing support for SI prefixes, but it can also efficiently represent any rational magnitude. For example, IEC 80000 prefixes used in the IT industry can be implemented as: @@ -157,10 +160,10 @@ template inline constexpr yobi_ yobi; ## Scaled units In the [SI](../../appendix/glossary.md#si), all units are either base or derived units or prefixed -versions of those. However, those are not the only options possible. +versions of those. However, those are only some of the options possible. For example, there is a list of [off-system units](../../appendix/glossary.md#off-system-unit) -accepted for use with SI. All of those are scaled versions of the SI units with ratios that can't +accepted for use with SI. Those are scaled versions of the SI units with ratios that can't be explicitly expressed with predefined SI prefixes. Those include units like minute, hour, or electronvolt: diff --git a/example/currency.cpp b/example/currency.cpp index 40892ad2a..fb1ff9fa6 100644 --- a/example/currency.cpp +++ b/example/currency.cpp @@ -41,6 +41,15 @@ inline constexpr struct great_british_pound : named_unit<"GBP", kind_of> {} japanese_jen; // clang-format on +namespace unit_symbols { + +inline constexpr auto EUR = euro; +inline constexpr auto USD = us_dollar; +inline constexpr auto GBP = great_british_pound; +inline constexpr auto JPY = japanese_jen; + +} // namespace unit_symbols + static_assert(!std::equality_comparable_with, quantity>); @@ -88,7 +97,9 @@ quantity_point exchange_to(quantity_point q) int main() { - quantity_point price_usd = zero + 100 * us_dollar; + using namespace unit_symbols; + + quantity_point price_usd = zero + 100 * USD; quantity_point price_euro = exchange_to(price_usd); std::cout << price_usd.quantity_from(zero) << " -> " << price_euro.quantity_from(zero) << "\n"; diff --git a/src/core/include/mp-units/unit.h b/src/core/include/mp-units/unit.h index c792f5529..c55425970 100644 --- a/src/core/include/mp-units/unit.h +++ b/src/core/include/mp-units/unit.h @@ -262,16 +262,13 @@ struct is_one : std::true_type {}; /** * @brief A canonical representation of a unit * - * A canonical representation of a unit consists of a `reference_unit` and its scaling - * factor represented by the magnitude `mag`. - * - * `reference_unit` is a unit (possibly derived one) that consists only named base units. - * All of the intermediate derived units are extracted, prefixes and magnitudes of scaled - * units are stripped from them and accounted in the `mag`. + * A canonical representation of a unit consists of: + * - a reference unit being the result of extraction of all the intermediate derived units, + * - a magnitude being a product of all the prefixes and magnitudes of extracted scaled units. * * All units having the same canonical unit are deemed equal. - * All units having the same `reference_unit` are convertible (their `mag` may differ - * and is the subject of conversion). + * All units having the same reference unit are convertible (their magnitude may differ and + * is used during conversion). * * @tparam U a unit to use as a `reference_unit` * @tparam M a Magnitude representing an absolute scaling factor of this unit