v0.6.3

What's Changed

• Added lightning statistics reset, renamed CMD_RESET_RAINGAUGE to CMD_RESET_WS_POSTPROC in #73
• Updated uplink formatter example in #74
• Switched to lwActivate() from radiolib-persistence/examples/LoRaWAN_ESP32 in #75
• Fixed CMD_GET_BLE_ADDR (get default if Preferences are empty/zero) in #76
• Updated scripts/examples.json
• Library updates
  • BresserWeatherSensorReceiver v0.28.8
    (fixes using default sensor include/exclude lists if lists in Preferences are empty/zero)
  • NimBLE-Arduino v1.4.2
  • powerfeather-sdk v1.0.6

Full Changelog: v0.6.2...v0.6.3

v0.6.2

What's Changed

• Fixed using BLE addresses from preferences in #71 & #72

Full Changelog: v0.6.1...v0.6.2

v0.6.1

What's Changed

• Fix maximum number of 868 MHz sensors' default in #57
• Added AppLayer programming interface documentation in #58
• Added LoRaWAN device status message (CMD_GET_LW_STATUS) in #59
• Fixed exception caused by max_num_sensors = 0 in #62
• Fixed exception with empty list of BLE addresses in #64
• Refactored command encoding #66
• Added 'ChirpStack and InfluxDB Integration' by Davide D'Asaro (@evon800c) in #52
• Fixes in Config Helper and uplink payload formatter
• Updated BresserWeatherSensorReceiver to v0.28.7

Full Changelog: v0.6.0...v0.6.1

v0.6.0

What's Changed

• Added control of enabled decoders via LoRaWAN in #27
• Added 1-Wire temperature sensor function in #31
• Added configuration of sensor data uplink payload via LoRaWAN in #40
• Added mapping of invalid RainGauge values to INV_FLOAT in #46
• Changed lightning event to provide timestamp and time in #47
• Added compatibility mode: "status" flags as in BresserweatherSensorTTN in #49 & #50
• Added uplink of sensor status flags via downlink command CMD_GET_SENSORS_STAT and at fixed interval in #51
• Modified recalling of LoRaWAN nonces & session after changes in RadioLib v6.6.x in #53
• Config Helper: Added maximum payload size input, info and modified check for size limit in #54
• Added configuration of sensor status uplink interval via LoRaWAN in #55
• Refactored AppLayer by moving code into PayloadBresser, PayloadAnalog, PayloadDigital and PayloadBLE
• Modified default payload
• Created payload Config Helper
• Modified payload formatters
• Updated board configurations after changes in Arduino ESP32 Package v3.0.0
• Updated library dependencies:
  • [email protected]
  • [email protected]

Full Changelog: v0.5.0...v0.6.0

v0.5.0

What's Changed

• Implement configuration of maximum number of 868 MHz sensors & RX flags via LoRaWAN in #22
• Added configuration of sensor data decoders via LoRaWAN #23
• Added template/description for customizing AppLayer in #26
• Minor fixes in downlink_formatter.js
• Added scripts/examples.json and scripts/metadata.json (see #10)
• Updated BresserWeatherSensorReceiver to v0.28.2

Full Changelog: v0.4.0...v0.5.0

v0.4.0

What's Changed

• Heltec WiFi 32 LoRa V3: Changed ADC input attenuation to get higher accuracy of battery voltage measurement in #20 —
  thanks to @evon800c for this contribution!
• Implemented optional loading of LoRaWAN secrets from JSON file on LittleFS in #21

Full Changelog: v0.3.1...v0.4.0

v0.3.1

What's Changed

• Fixed PowerFeather battery voltage measurement in #19
• Refactoring: Moved LoRaWAN command interface from BresserWeatherSensorLWCfg.h to BresserWeatherSensorLWCmd.h

Full Changelog: v0.3.0...v0.3.1

v0.3.0

What's Changed

• Refactored BLE address initialization in #15
• Added configuration of BLE scan parameters via LoRaWAN in #17
• Implemented battery voltage measurement for Heltec WiFi LoRa 32 V3 in #16 — thanks @evon800c for testing!
• Modified ADC configuration/getBatteryVoltage()
• Fixed uplink_formatter.js/downlink_formatter.js
• Updated ATC_MiThermometer requirement from ^0.3.1 to ^0.4.2 by @dependabot in #18
• Updated TheengsDecoder to v1.7.8
• Updated documentation
• Added keywords.txt

Full Changelog: v0.2.0...v0.3.0

v0.2.0

What's Changed

• Refactored ADC handling in #1
• Added separation between LoRaWAN and application layer in #3
• Added ESP32-S3 PowerFeather in #2
• Added sensor configuration (BLE and Bresser) at run time in #6
• Updated payload formatters in #7
• Improved Heltec WiFi LoRa 32 V3 detection by C++ preprocessor
• Update BresserWeatherSensorReceiver requirement from ^0.25.0 to ^0.27.1

Known limitation: Battery voltage measurement not working for some targets
(only affects energy saving / battery discharge protection)

Full Changelog: v0.1.0...v0.2.0

v0.1.0

Release Notes

• Initial release
• Known limitation: Battery voltage measurement not working for some targets
  (only affects energy saving / battery discharge protection)