diff --git a/setup/configuration.md b/setup/configuration.md
index 07c2a1d..e78779f 100644
--- a/setup/configuration.md
+++ b/setup/configuration.md
@@ -1,10 +1,13 @@
-# Configuration
+---
+description: >-
+  Mainsail requires a minimum configuration to function properly and will
+  display a warning at startup if the required parts are not found in your
+  configuration file(s).
+---
 
-{% hint style="warning" %}
-Mainsail requires a minimum configuration to function properly and will display a warning at startup if the required parts are not found in your configuration file(s).
-{% endhint %}
+# Configuration
 
-## Required
+## Fast way (mainsail.cfg)
 
 The following configuration elements are required and must be configured for Mainsail to function properly. In **MainsailOS** they are stored by default in [mainsail.cfg](https://github.com/mainsail-crew/mainsail-config/blob/master/client.cfg) and only need to be included in `printer.cfg`.
 
@@ -16,6 +19,12 @@ This ensures that your printer config file includes the mainsail.cfg. If you are
 [include mainsail.cfg]
 ```
 
+## Manual way
+
+{% hint style="info" %}
+This step is not necessary if you are already using mainsail.cfg.
+{% endhint %}
+
 ### Virtual SD Card <a href="#virtual-sd-card" id="virtual-sd-card"></a>
 
 The `Virtual SD Card` allows G-Code file uploads.
@@ -41,9 +50,7 @@ These macros enable pause and resume in Klipper.
 [pause_resume]
 ```
 
-### Macros <a href="#macros" id="macros"></a>
-
-#### Add pause / resume / cancel functionality <a href="#add-pause--resume--cancel-functionality" id="add-pause--resume--cancel-functionality"></a>
+#### Add pause / resume / cancel macros <a href="#add-pause--resume--cancel-functionality" id="add-pause--resume--cancel-functionality"></a>
 
 You can modify the below macros to fit your needs.
 
@@ -63,8 +70,8 @@ rename_existing: RESUME_BASE
 gcode:
   ##### read extrude from  _TOOLHEAD_PARK_PAUSE_CANCEL  macro #####
 
-{% raw %}
-  {% set extrude = printer['gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL'].extrude %}
+  {% raw %}
+{% set extrude = printer['gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL'].extrude %}
   #### get VELOCITY parameter if specified ####
   {% if 'VELOCITY' in params|upper %}
     {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
@@ -82,6 +89,7 @@ gcode:
 {% endraw %}
 
 
+
   RESUME_BASE {get_params}
 ```
 
@@ -93,13 +101,14 @@ variable_park: True
 gcode:
   ## Move head and retract only if not already in the pause state and park set to true
 
-{% raw %}
-  {% if printer.pause_resume.is_paused|lower == 'false' and park|lower == 'true'%}
+  {% raw %}
+{% if printer.pause_resume.is_paused|lower == 'false' and park|lower == 'true'%}
     _TOOLHEAD_PARK_PAUSE_CANCEL
   {% endif %}
 {% endraw %}
 
 
+
   TURN_OFF_HEATERS
   CANCEL_PRINT_BASE
 ```
@@ -112,8 +121,8 @@ gcode:
   ##### set park positon for x and y #####
   # default is your max posion from your printer.cfg
 
-{% raw %}
-  {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
+  {% raw %}
+{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
   {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
   {% set z_park_delta = 2.0 %}
   ##### calculate save lift position #####