Skip to content

Latest commit

 

History

History
36 lines (27 loc) · 1.9 KB

File metadata and controls

36 lines (27 loc) · 1.9 KB

Power Manager HWIP Technical Specification

pwrmgr:

Overview

This document specifies the functionality of the OpenTitan power manager.

Features

  • Cold boot, low power entry / exit and reset support.
  • 2 different low power modes.
  • Software initiated low power entry and hardware requested low power exit.
  • Peripheral reset requests
  • Low power abort and low power fall-through support.
  • ROM integrity check at power-up.
  • Local checks for escalator and power stability.

Description

The power manager sequences power, clocks, and reset resources of the design through cold boot, low power entry/exit and reset scenarios.

Cold boot, also known as POR (power on reset) is the first reset state of the design. The power manager sequences the design from a freshly reset state to an active state where software can be initialized.

  • Low power entry is the process in which the device enters one of two low power modes (sleep or deep sleep).
  • Low power exit is the process in which the device exits low power mode and returns to active state.
  • Low power entry is always initiated by software, while low power exit is always initiated by a previously setup hardware event such as pins or internal timers.
  • The power manager processes the software and hardware requests to perform the appropriate actions.

Reset scenarios refer to non-POR events that cause the device to reboot. There are various stimuli that can cause such a reset, ranging from external user input to watchdog timeout. The power manager processes the reset request and brings the device to an appropriate state.