Skip to content

Latest commit

 

History

History
78 lines (51 loc) · 2.63 KB

README.md

File metadata and controls

78 lines (51 loc) · 2.63 KB

OpenTitan Synthesis Flow

This readme gives some quick instructions on how to run synthesis in OpenTitan, using top_earlgrey as an example.

Normal Synthesis Through dvsim

To run synthesis through dvsim, use a command like the following:

$ cd $REPO_TOP
$ ./util/dvsim/dvsim.py -t dc hw/top_earlgrey/syn/chip_earlgrey_asic_syn_cfg.hjson --purge --local

This comment will invoke dvsim to run synthesis and terminate upon success or failure. The synthesis results are placed in the scratch area under $SCRATCH_ROOT/{branch_name}/chip_earlgrey_asic-syn-dc/ for this example command.

The main script that powers synthesis is hw/syn/tools/dc/run-syn.tcl.

To follow the progress of the different synthesis flow stages (analysis, elaboration, etc.), it is recommended to use the tail -f command on the report file of interest.

For example, overall status can be observed with

tail -f `$SCRATCH_ROOT/{branch_name}/chip_earlgrey_asic-syn-dc/default/synthesis.log`

Another example would be the elaboration status

tail -f `$SCRATCH_ROOT/{branch_name}/chip_earlgrey_asic-syn-dc/default/REPORTS/elab.rpt`

Re-run Interactive Synthesis

Assuming the above synthesis steps produces an error or creates a situation where we must run synthesis interactively for debug, it can be done as follows.

When the normal synthesis steps are run (see example above), an output file called env_variables.tcl is created in the synthesis scratch area, $SCRATCH_ROOT/{branch_name}/chip_earlgrey_asic-syn-dc/default in the above example.

To re-run this synthesis interactively, do the following:

$ cd $SCRATCH_ROOT/{branch_name}/chip_earlgrey_asic-syn-dc/default/syn-icarus
$ dc_shell

The above command opens dc_shell in the scratch area. Once dc_shell is open, do the following:

$ source ../env_variables.tcl
$ source $REPO_TOP/hw/syn/tools/dc/run-syn.tcl

Now, synthesis will begin again but will not exit dc_shell upon completion. If you do not wish for synthesis to run that far, run_syn.tcl can be directly modified to add or skip steps.

Loading DDC After Synth Completion

If a synthesis job has completed and you would like to reload the session for more details, follow the steps below

$ cd $SCRATCH_ROOT/{branch_name}/chip_earlgrey_asic-syn-dc/default/syn-icarus
$ dc_shell

The above command opens dc_shell in the scratch area. Once dc_shell is open, do the following:

$ source ../env_variables.tcl
$ set foundry_root "$::env(foundry_root)"
$ source "${foundry_root}/syn/dc/setup.tcl"
$ read_ddc DDC/mapped.ddc

This will begin reading in the libraries and load up the database for further analysis / experiments.