-
Notifications
You must be signed in to change notification settings - Fork 772
/
rom_ctrl_testplan.hjson
110 lines (104 loc) · 4 KB
/
rom_ctrl_testplan.hjson
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
// Copyright lowRISC contributors (OpenTitan project).
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{
name: "rom_ctrl"
import_testplans: ["hw/dv/tools/dvsim/testplans/csr_testplan.hjson",
"hw/dv/tools/dvsim/testplans/alert_test_testplan.hjson",
"hw/dv/tools/dvsim/testplans/mem_testplan.hjson",
"hw/dv/tools/dvsim/testplans/passthru_mem_intg_testplan.hjson",
"hw/dv/tools/dvsim/testplans/tl_device_access_types_testplan.hjson",
"hw/dv/tools/dvsim/testplans/sec_cm_fsm_testplan.hjson",
"hw/dv/tools/dvsim/testplans/stress_all_with_reset_testplan.hjson",
"rom_ctrl_sec_cm_testplan.hjson"]
testpoints: [
{
name: smoke
desc: '''
Smoke test exercising the main features of rom_ctrl.
**Stimulus**:
- Create a random valid ROM where expected digest doesn't match with the KMAC digest
image and load into memory model
- Allow the rom check to complete
- Perform some random memory accesses
- Create a random valid ROM where expected digest matches with the KMAC digest
- Repeat steps 2 and 3.
**Checks**:
- Check that all data supplied to kmac is correct
- Check that the rom checking sequence gives the expected result
- Check that the memory accesses return expected data
- Check that pwrmgr_data_o.good is not asserted in first iteration.
- Check that pwrmgr_data_o.good is asserted in second iteration.
- Check that tile link accesses are blocked till pwrmgr_data_o.done is asserted.
'''
stage: V1
tests: ["rom_ctrl_smoke"]
}
{
name: corrupt_sig_fatal_chk
desc: '''
Corrupt integrity of signals like the select signal to addr mux.
**Checks**:
- Check that fatal error is flagged.
'''
stage: V2S
tests: ["rom_ctrl_corrupt_sig_fatal_chk"]
}
{
name: max_throughput_chk
desc: '''
This test is intended to test the max throughput of ROM controller.
It takes N+1 cycles to finish N ROM read accesses.
**Checks**:
- Check if N read accesses finish in N+1 cycles.
'''
stage: V2
tests: ["rom_ctrl_max_throughput_chk"]
}
{
name: stress_all
desc: '''
- Combine above sequences in one test to run sequentially.
- Randomly add reset between each sequence'''
stage: V2
tests: ["rom_ctrl_stress_all"]
}
{
name: kmac_err_chk
desc: '''
- Generate error from KMAC when it responds with KMAC digest image.
- Check that ROM controller goes into invalid state'''
stage: V2
tests: ["rom_ctrl_kmac_err_chk"]
}
]
covergroups: [
{
name: rom_ctrl_kmac_cg
desc: '''
Collect coverage on the rom_ctrl / kmac interface, specifically around
stalling and back-pressure behavior.
The agent needs to cover the case where the kmac returns a digest
before the rom_ctrl finishes reading the expected digest from memory,
and also after.
'''
}
{
name: rom_ctrl_tlul_cg
desc: '''
-Collect coverage on the two TLUL interfaces, specifically checking
that we see requests around the same time as the rom check completes.
- Collect coverage to ensure that a_valid goes high when rom check
is in progress. This ensures that the scenario where TL accesses are
blocked until the ROM check is done is covered.
'''
}
{
name: rom_ctrl_check_cg
desc: '''
Collect coverage on the outputs sent to the power manager to confirm
that we see pass and fail results.
'''
}
]
}