diff --git a/README.md b/README.md
index 8f71f4d..2badc3c 100644
--- a/README.md
+++ b/README.md
@@ -28,7 +28,7 @@ This library is designed to work with GPS module through the hardware serial por
 
 Download `UbxGps` and place it to the Arduino libraries directory. Refer to [How to install Libraries](https://www.arduino.cc/en/Guide/Libraries) for details.
 
-Next step is configuring your GPS module properly, to find out how to do this see section [GPS module configuration](#gps-module-configuration).
+Next step is configuring your GPS module properly, to find out how to do this see section [GPS module configuration](#gps-module-configuration). Also, take a look at the [Auto-configuration](https://github.com/1oginov/UBX-GPS-Library/blob/master/Configuration/Auto-configuration-Mega/Auto-configuration-Mega.ino) sketch for the Arduino Mega boards to configure your GPS module automatically to get NAV-PVT messages with 100 ms frequency and 115200 baudrate. 
 
 After that you can use included examples or play with following simple sketch:
 
@@ -61,6 +61,16 @@ Because of Uno has only one TX/RX pair we should connect GPS module's `TX` to th
 
 ![Wiring](https://raw.githubusercontent.com/1oginov/UBX-GPS-Library/master/Configuration/Step%201.%20Wiring.jpg)
 
+### Auto-configuration
+
+After wiring you can upload the [Auto-configuration](https://github.com/1oginov/UBX-GPS-Library/blob/master/Configuration/Auto-configuration-Mega/Auto-configuration-Mega.ino) sketch for the Arduino Mega boards to configure your GPS module automatically.
+
+At the moment it configures the receiver to get NAV-PVT messages with 100 ms frequency and 115200 baudrate, but you can change it according your needs.
+
+You are not required to follow next steps and [use u-center](#step-3-meet-u-center) after that, you can pass to the [Checks](#step-9-checks) step instead.
+
+![Auto-configuration](https://raw.githubusercontent.com/1oginov/UBX-GPS-Library/master/Configuration/Auto-configuration.jpg)
+
 ### Step 2. Serial bridge
 
 Let's make a bridge between GPS module and computer: upload `Serial-Bridge-Uno.ino` or `Serial-Bridge-Mega.ino` sketch on the board, it allows us to communicate with GPS module directly from computer. Open _Serial Monitor_, and if your GPS module is new or have default settings you will see something like on the picture below. If everything is OK, GPS will send some data.
@@ -131,6 +141,10 @@ Feel free to add something useful to this library :relaxed: For example new clas
 
 ## History
 
+### July 3, 2017
+
+Auto-configuration sketch for the Arduino Mega boards added
+
 ### July 2, 2017
 
 UbxGpsNavPosecef.h added