Skip to content

Latest commit

 

History

History
277 lines (204 loc) · 11.6 KB

README.md

File metadata and controls

277 lines (204 loc) · 11.6 KB

bundler-patch

bundler-patch can update your gems conservatively to deal with vulnerable gems or just get more current.

By default, "conservatively" means it will prefer the latest patch releases from the current version, over the latest minor releases or the latest major releases. This is somewhat opposite from bundle update which prefers newest/major versions first.

Works with Bundler 1.9 and higher. Starting with Bundler 1.14 (undocumented in 1.13), much of the core behavior in bundler-patch has been ported to Bundler itself. See Patch Level Options, Overlapping Dependencies in the bundle update docs, also Patch Level Options in the bundle outdated docs.

Build Status

Installation

$ gem install bundler-patch

Usage

With the bundler-patch binary available, both bundler-patch and bundle patch can be used to execute.

Without any options, all gems will be conservatively updated. An attempt to upgrade any vulnerable gem (according to https://github.com/rubysec/ruby-advisory-db) to a patched version will be made.

$ bundle patch

"Conservatively" means it will sort all available versions to prefer the latest patch releases from the current version, then the latest minor releases and then the latest major releases.

"Prefer" means that no available versions are removed from consideration*, to help ensure a suitable dependency graph can be reconciled. This does mean some gems cannot be upgraded or may be upgraded to unexpected versions. NOTE: There is a --strict option which will remove versions from consideration, see below.

*That's a white-lie. bundler-patch will actually remove from consideration any versions older than the currently locked version, which bundle update will not do. It's not common, but it is possible for bundle update to regress a gem to an older version, if necessary to reconcile the dependency graph.

Gem requirements as defined in the Gemfile will still define what versions are available. The new conservative behavior controls the preference order of those versions.

For example, if gem 'foo' is locked at 1.0.2, with no gem requirement defined in the Gemfile, and versions 1.0.3, 1.0.4, 1.1.0, 1.1.1, 2.0.0 all exist, the default order of preference will be "1.0.4, 1.0.3, 1.0.2, 1.1.1, 1.1.0, 2.0.0".

In the same example, if gem 'foo' has a requirement of '~> 1.0', version 2.0.0 will be removed from consideration as always.

With no gem names provided on the command line, all gems will be unlocked and open for updating. A list of gem names can be passed to restrict to just those gems.

$ bundle patch foo bar
  • -m/--minor option will give preference for minor versions over patch versions.

  • -n/--minimal option will reverse the preference order within patch, minor, major groups to just 'the next' version. In the prior example, the order of preference changes to "1.0.3, 1.0.4, 1.0.2, 1.1.0, 1.1.1, 2.0.0"

  • -s/--strict option will actually remove from consideration versions outside either the current patch version (or minor version if -m specified). This increases the chances of Bundler being unable to reconcile the dependency graph and could raise a VersionConflict.

bundler-patch will also check for vulnerabilities based on the ruby-advisory-db, but also will modify (if necessary) the gem requirement in the Gemfile on vulnerable gems to ensure they can be upgraded.

  • -l/--list option will just list vulnerable gems. No updates will be performed.

  • -a/--advisory-db-path option can provide the path to an additional custom ruby-advisory-db styled directory. The path should not include the final gems directory, that will be appended automatically. This can be used for flagging necessary updates for custom/internal gems.

  • -d/--ruby-advisory-db-path option can override the default path where the ruby-advisory-db repository is checked out into.

The rules for updating vulnerable gems are almost identical to the general bundler-patch behavior described above, and abide by the same options (-m, -n, and -s) though there are some tweaks to encourage getting to at least a patched version of the gem. Keep in mind Bundler may still choose unexpected versions in order to satisfy the dependency graph.

  • -v/--vulnerable-gems-only option will automatically restrict the gems to update list to currently vulnerable gems. If a combination of -v and a list of gem names are passed, the -v option is ignored in favor of the listed gem names.

bundler-patch can also update the Ruby version listed in .ruby-version and the Gemfile if given a list of the latest Ruby versions that are available with the following options. Jumps of major versions will not be made at all and this feature is designed such that the version will be updated to only the next available in the list. If the current version is 2.3.1, and the list of --rubies is "2.3.2, 2.3.3", then 2.3.2 will be used, not 2.3.3. The intention is for this list to be only the most recent version(s) of Ruby supported, (e.g. "2.1.10, 2.2.7, 2.3.4").

  • -r/--ruby option indicates updates to Ruby version will be made.
  • --rubies a comma-delimited list of target Ruby versions to upgrade to.

Examples

Single Gem

Requirements Locked Available Options Result
foo 1.4.3 1.4.4, 1.4.5, 1.5.0, 1.5.1 1.4.5
foo 1.4.3 1.4.4, 1.4.5, 1.5.0, 1.5.1 -m 1.5.1
foo 1.4.3 1.4.4, 1.4.5, 1.5.0, 1.5.1 -n 1.4.4
foo 1.4.3 1.4.4, 1.4.5, 1.5.0, 1.5.1 -m -n 1.5.0

Two Gems

Given the following gem specifications:

  • foo 1.4.3, requires: ~> bar 2.0
  • foo 1.4.4, requires: ~> bar 2.0
  • foo 1.4.5, requires: ~> bar 2.1
  • foo 1.5.0, requires: ~> bar 2.1
  • foo 1.5.1, requires: ~> bar 3.0
  • bar with versions 2.0.3, 2.0.4, 2.1.0, 2.1.1, 3.0.0

Gemfile:

gem 'foo'

Gemfile.lock:

foo (1.4.3)
  bar (~> 2.0)
bar (2.0.3)
# Command Line Result
1 bundle patch 'foo 1.4.5', 'bar 2.1.1'
2 bundle patch foo 'foo 1.4.5', 'bar 2.1.1'
3 bundle patch --minor 'foo 1.5.1', 'bar 3.0.0'
4 bundle patch --minor --strict 'foo 1.5.0', 'bar 2.1.1'
5 bundle patch --strict 'foo 1.4.4', 'bar 2.0.4'
6 bundle patch --minimal 'foo 1.4.4', 'bar 2.0.4'
7 bundle patch --strict foo 'foo 1.4.4', 'bar 2.0.3'
8 bundle patch --minimal --minor 'foo 1.5.0', 'bar 2.1.0'

In case 1, bar is upgraded to 2.1.1, a minor version increase, because the dependency from foo 1.4.5 required it.

In case 2, bar still moves because it is not a declared dependency in the Gemfile, but it is a dependency of foo and is therefore free to move if foo's requirement of bar changes. If bar appeared in the Gemfile, then it would stay put in this case and foo would only move to 1.4.4.

In case 3, bar goes up a whole major release, because a minor increase is preferred now for foo, and when it goes to 1.5.1, it requires 3.0.0 of bar.

In case 4, foo is preferred up to a 1.5.x, but 1.5.1 won't work because the strict -s flag removes bar 3.0.0 from consideration since it's a major increment.

In case 5, both foo and bar have any minor or major increments removed from consideration because of the -s strict flag, so the most they can move is up to 1.4.4 and 2.0.4.

In case 6, the prefer minimal switch -n means they only increment to the next available release.

In case 7, the -s strict flag removes any bar 2.1 versions from consideration, which restricts foo to 1.4.4 at latest. bar is not unlocked and therefore doesn't move.

In case 8, the -n and -m switches allow both to move to just the next available minor version.

Troubleshooting

First, make sure the current bundle command itself runs to completion on its own without any problems.

The most frequent problems with this tool involve expectations around what gems should or shouldn't be upgraded. This can quickly get complicated as even a small dependency tree can involve many moving parts, and Bundler works hard to find a combination that satisfies all of the dependencies and requirements.

NOTE: the requirements in the Gemfile trump anything else. The most control you have is by modifying those in the Gemfile, in some circumstances it may be better to pin your versions to what you need instead of trying to diagnose why Bundler isn't calculating the versions you expect with a broader requirement. If there is an incompatibility, pinning to desired versions can also aide in debugging dependency conflicts.

You can get a (very verbose) look into how Bundler's resolution algorithm is working by setting the DEBUG_RESOLVER environment variable. While it can be tricky to dig through, it should explain how it came to the conclusions it came to.

In particular, grep for 'Unwinding for conflict' in the debug output to isolate some key issues that may be preventing the outcome you expect.

Adding to the usual Bundler complexity, bundler-patch is injecting its own logic to the resolution process to achieve its goals. If there's a bug involved, it's almost certainly in the bundler-patch code as Bundler has been around a long time and has thorough testing and real world experience.

bundler-patch can dump its own debug output, potentially helpful, with DEBUG_PATCH_RESOLVER.

To get additional Bundler debugging output, enable the DEBUG env variable. This will include all of the details of the downloading the full dependency data from remote sources.

At the end of all of this though, again, the requirements in the Gemfile trump anything else, and the most control you have is by modifying those in the Gemfile.

Breaking Changes from 0.x to 1.0

  • Command line options with underscores now uses hyphens instead of underscores. (Underscore versions will still work, but are undocumented).

  • Some options have been renamed. (Old names will still work, but will be undocumented).

    • --minor_preferred => --minor
    • --prefer_minimal => --minimal / -p => -n
    • --strict_updates => --strict

In the "Two Gems" cases documented above, case 2 was wrong (the docs were incorrect, there was no bug in the code). Case 2 has been corrected and a new similar case has been inserted towards the end of the table.

Development

How To

After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/livingsocial/bundler-patch.

License

The gem is available as open source under the terms of the MIT License.