Configuring LiT with integrated lnd node

The "integrated" mode means that lnd is started within the same process as litd, alongside the UI server. Once the integrated lnd has been unlocked, litd then goes ahead and starts faraday, pool and loop and connects them to the integrated lnd node.

Currently the UI server cannot connect to loop, pool or faraday daemons that aren't running in the same process. But that feature will also be available in future versions.

Use command line parameters only

In addition to the LiT specific parameters, you must also provide configuration to the lnd, loop and faraday daemons. For lnd, each flag must be prefixed with lnd. (ex: lnd.lnddir=~/.lnd). Please see the sample-lnd.conf file for more details on the available parameters. Note that loopd and faraday will automatically connect to the in-process lnd node, so you do not need to provide them with any additional parameters unless you want to override them. If you do override them, be sure to add the loop. and faraday. prefixes.

To see all available command line options, run litd --help.

Here is an example command to start litd on testnet with a local bitcoind node:

⛰  litd \
  --httpslisten=0.0.0.0:8443 \
  --uipassword=My$trongP@ssword \
  --letsencrypt \
  --letsencrypthost=loop.merchant.com \
  --network=testnet \
  --lnd-mode=integrated \
  --lnd.lnddir=/root/.lnd \
  --lnd.alias=merchant \
  --lnd.externalip=loop.merchant.com \
  --lnd.rpclisten=0.0.0.0:10009 \
  --lnd.listen=0.0.0.0:9735 \
  --lnd.bitcoin.node=bitcoind \
  --lnd.bitcoind.rpchost=localhost \
  --lnd.bitcoind.rpcuser=testnetuser \
  --lnd.bitcoind.rpcpass=testnetpw \
  --lnd.bitcoind.zmqpubrawblock=localhost:28332 \
  --lnd.bitcoind.zmqpubrawtx=localhost:28333 \
  --lnd.debuglevel=debug \
  --loop.loopoutmaxparts=5 \
  --faraday.min_monitored=48h \
  --faraday.connect_bitcoin \
  --faraday.bitcoin.host=localhost \
  --faraday.bitcoin.user=testnetuser \
  --faraday.bitcoin.password=testnetpw

Use a configuration file

You can also store the configuration in a persistent ~/.lit/lit.conf file, so you do not need to type in the command line arguments every time you start the server. Just remember to use the appropriate prefixes as necessary.

Make sure you don't add any section headers (the lines starting with [ and ending with ], for example [Application Options]) as these don't work with the additional levels of sub configurations. You can replace them with a comment (starting with the # character) to get the same grouping effect as before.

Example ~/.lit/lit.conf:

# Application Options
httpslisten=0.0.0.0:8443
tlscertpath=~/.lit/tls.cert
tlskeypath=~/.lit/tls.key
letsencrypt=true
letsencrypthost=loop.merchant.com
lnd-mode=integrated
network=testnet

# Lnd
lnd.lnddir=~/.lnd
lnd.alias=merchant
lnd.externalip=loop.merchant.com
lnd.rpclisten=0.0.0.0:10009
lnd.listen=0.0.0.0:9735
lnd.debuglevel=debug

# Lnd - bitcoin
lnd.bitcoin.node=bitcoind

# Lnd - bitcoind
lnd.bitcoind.rpchost=localhost
lnd.bitcoind.rpcuser=testnetuser
lnd.bitcoind.rpcpass=testnetpw
lnd.bitcoind.zmqpubrawblock=localhost:28332
lnd.bitcoind.zmqpubrawtx=localhost:28333

# Loop
loop.loopoutmaxparts=5

# Pool
pool.newnodesonly=true

# Faraday
faraday.min_monitored=48h

# Faraday - bitcoin
faraday.connect_bitcoin=true
faraday.bitcoin.host=localhost
faraday.bitcoin.user=testnetuser
faraday.bitcoin.password=testnetpw

The default location for the lit.conf file will depend on your operating system:

On MacOS: ~/Library/Application Support/Lit/lit.conf
On Linux: ~/.lit/lit.conf
On Windows: ~/AppData/Roaming/Lit/lit.conf

LiT and LND interfaces

Port 10009 is the port that LND uses to expose its gRPC interface. LND's tls cert and macaroons will be required when making requests to this interface.

Port 8443 is a port that LiT uses to expose a variety of interfaces: gRPC, REST, grpc-web. When making requests using this interface, LiT's tls cert and macaroons should be used.

Upgrade Existing Nodes

If you already have existing lnd, loop, or faraday nodes, you can easily upgrade them to the LiT single executable while keeping all of your past data.

For lnd:

if you use an lnd.conf file for configurations, copy that file to your LiT directory (~/.lit for example, see last section for other operating system's default directories) and call it lit.conf. Then edit lit.conf and add the lnd. prefix to each of the configuration parameters. You also have to remove any section headers (the lines starting with [ and ending with ], for example [Application Options]) as these don't work with the additional levels of sub configurations. You can replace them with a comment (starting with the # character) to get the same grouping effect as before.

Before:
```
[Application Options]
alias=merchant

[bitcoin]
bitcoin.active=true
```
After:
```
# New flag to tell LiT to run its own lnd in integrated mode. We need to set
# this because "remote" is the new default value if we don't specify anything.
# We also don't need to explicitly activate the Bitcoin network anymore as
# that is the default for LiT.
lnd-mode=integrated

# Application Options
lnd.alias=merchant
```
if you use command line arguments for configuration, add the lnd. prefix to each argument to litd

Before:
```
⛰  lnd --lnddir=~/.lnd --alias=merchant ...
```
After:
```
⛰  litd lnd.lnddir=~/.lnd --lnd.alias=merchant ...
```

For loop:

if you use an loop.conf file for configurations, copy the parameters into the lit.conf and add the loop. prefix to each of the configuration parameters. Also remove any section headers or replace them with comments.

Before: (in loop.conf)
```
[Application Options]
loopoutmaxparts=5
```
After: (in lit.conf)
```
# Loop
loop.loopoutmaxparts=5
```

if you use command line arguments for configuration, add the loop. prefix to each argument to litd

Before:

⛰  loop --loopoutmaxparts=5 --debuglevel=debug ...

After:

⛰  litd --loop.loopoutmaxparts=5 --loop.debuglevel=debug ...

For faraday:

the standalone faraday daemon does not load configuration from a file, but you can now store the parameters into the lit.conf file. Just add the faraday. prefix to each of the configuration parameters.

Before: (from command line)
```
⛰  faraday --min_monitored=48h
```
After: (in lit.conf)
```
# Faraday
faraday.min_monitored=48h
```

if you use command line arguments for configuration, add the faraday. prefix to each argument to litd

Before:

⛰  faraday --min_monitored=48h --debuglevel=debug ...

After:

⛰  litd --faraday.min_monitored=48h --faraday.debuglevel=debug...

Upgrading from LiT v0.1.1-alpha or earlier

If you used command line arguments only, you don't need to change anything when updating from LiT v0.1.1-alpha or earlier.

If you used an lnd.conf file for LiT configurations, move that file to your LiT directory (~/.lit for example, see last section for other operating system's default directories) and call it lit.conf. Then edit lit.conf and remove any section headers (the lines starting with [ and ending with ], for example [Application Options]) as these don't work with the additional levels of sub configurations. You can replace them with a comment (starting with the # character) to get the same grouping effect as before.

Example commands for interacting with the command line

Because not all functionality of lnd (or loop/faraday for that matter) is available through the web UI, it will still be necessary to interact with those daemons through the command line.

We are going through an example for each of the command line tools and will explain the reasons for the extra flags. The examples assume that LiT is started with the following configuration (only relevant parts shown here):

lnd-mode=integrated
network=testnet

lnd.lnddir=~/.lnd
lnd.rpclisten=0.0.0.0:10009

Because all components listen on the same gRPC port and use the same TLS certificate, some command line calls now need some extra options that weren't necessary before.

NOTE: All mentioned command line tools have the following behavior in common: You either specify the --network flag and the --tlscertpath and --macaroonpath are implied by looking inside the default directories for that network. Or you specify the --tlscertpath and --macaroonpath flags explicitly, then you must not set the --network flag. Otherwise, you will get an error like [lncli] could not load global options: unable to read macaroon path (check the network setting!): open /home/<user>/.lnd/data/chain/bitcoin/testnet/admin.macaroon: no such file or directory.

Example `lncli` command

The lncli commands in the "integrated" mode are the same as if lnd was running standalone. The --lnddir flag does not need to be specified as long as it is the default directory (~/.lnd on Linux).

⛰  lncli --rpcserver=localhost:10009 --tlscertpath=~/.lnd/tls.cert getinfo

Example `loop` command

This is where things get a bit tricky. Because as mentioned above, loopd also runs on the same gRPC server as lnd. That's why we have to both specify the host:port as well as the TLS certificate of lnd. But loopd verifies its own macaroon, so we have to specify that one from the .loop directory.

⛰  loop --rpcserver=localhost:8443 --tlscertpath=~/.lit/tls.cert \
  --macaroonpath=~/.loop/testnet/loop.macaroon \
  quote out 500000

You can easily create an alias for this by adding the following line to your ~/.bashrc file:

⛰  alias lit-loop="loop --rpcserver=localhost:8443 --tlscertpath=~/.lit/tls.cert --macaroonpath=~/.loop/testnet/loop.macaroon"

Example `pool` command

Again, poold also runs on the same gRPC server as lnd and we have to specify the host:port and the TLS certificate of lnd but use the macaroon from the .pool directory.

⛰  pool --rpcserver=localhost:8443 --tlscertpath=~/.lit/tls.cert \
  --macaroonpath=~/.pool/testnet/pool.macaroon \
  accounts list

You can easily create an alias for this by adding the following line to your ~/.bashrc file:

⛰  alias lit-pool="pool --rpcserver=localhost:8443 --tlscertpath=~/.lit/tls.cert --macaroonpath=~/.pool/testnet/pool.macaroon"

Example `frcli` command

Faraday's command line tool follows the same pattern as loop. We also have to specify the server and TLS flags for lnd but use faraday's macaroon:

⛰  frcli --rpcserver=localhost:8443 --tlscertpath=~/.lit/tls.cert \
  --macaroonpath=~/.faraday/testnet/faraday.macaroon \
  audit

You can easily create an alias for this by adding the following line to your ~/.bashrc file:

⛰  alias lit-frcli="frcli --rpcserver=localhost:8443 --tlscertpath=~/.lit/tls.cert --macaroonpath=~/.faraday/testnet/faraday.macaroon"

Shutting down LiT

In the integrated mode LiT can be shut down by stopping the integrated lnd node:

⛰  lncli stop

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

config-lnd-integrated.md

config-lnd-integrated.md

Configuring LiT with integrated lnd node

Use command line parameters only

Use a configuration file

LiT and LND interfaces

Upgrade Existing Nodes

Upgrading from LiT v0.1.1-alpha or earlier

Example commands for interacting with the command line

Example `lncli` command

Example `loop` command

Example `pool` command

Example `frcli` command

Shutting down LiT

Files

config-lnd-integrated.md

Latest commit

History

config-lnd-integrated.md

File metadata and controls

Configuring LiT with integrated lnd node

Use command line parameters only

Use a configuration file

LiT and LND interfaces

Upgrade Existing Nodes

Upgrading from LiT v0.1.1-alpha or earlier

Example commands for interacting with the command line

Example lncli command

Example loop command

Example pool command

Example frcli command

Shutting down LiT

Example `lncli` command

Example `loop` command

Example `pool` command

Example `frcli` command