Skip to content
This repository has been archived by the owner on Aug 6, 2022. It is now read-only.

Latest commit

 

History

History
155 lines (106 loc) · 9.08 KB

README.bak.md

File metadata and controls

155 lines (106 loc) · 9.08 KB

plex_autoscan

Script to assist Sonarr/Radarr/Lidarr with Plex imports so that it will only scan the folder that has been imported, instead of the entire library section.

Install

Debian/Ubuntu

  1. cd /opt
  2. sudo git clone https://github.com/l3uddz/plex_autoscan
  3. sudo chown -R user:user plex_autoscan
  4. cd plex_autoscan
  5. sudo pip install -r requirements.txt
  6. python scan.py to generate default config.json

The user that runs plex_autoscan needs to beable to sudo without a password otherwise it cannot execute the PLEX_SCANNER as plex. This can be disabled by config option USE_SUDO

Windows

  1. Git clone / Download the master folder
  2. Install python requirements.txt, e.g. c:\python27\scripts\pip install -r c:\plex_autoscan\requirements.txt
  3. python scan.py to generate default config.json

The user running plex_autoscan MUST be the same user as the one running plex, e.g. Administrator)

Configuration

Example configuration:

{
    "DOCKER_NAME": "plex",
    "PLEX_DATABASE_PATH": "/var/lib/plexmediaserver/Library/Application Support/Plex Media Server/Plug-in Support/Databases/com.plexapp.plugins.library.db",
    "PLEX_EMPTY_TRASH": true,
    "PLEX_EMPTY_TRASH_CONTROL_FILES": [
        "/mnt/unionfs/mounted.bin"
    ],
    "PLEX_EMPTY_TRASH_MAX_FILES": 100,
    "PLEX_EMPTY_TRASH_ZERO_DELETED": false,
    "PLEX_LD_LIBRARY_PATH": "/usr/lib/plexmediaserver",
    "PLEX_LOCAL_URL": "http://localhost:32400",
    "PLEX_SCANNER": "/usr/lib/plexmediaserver/Plex\\ Media\\ Scanner",
    "PLEX_SUPPORT_DIR": "/var/lib/plexmediaserver/Library/Application\\ Support",
    "PLEX_TOKEN": "XXXXXXXXXX",
    "PLEX_USER": "plex",
    "PLEX_WAIT_FOR_EXTERNAL_SCANNERS": true,
    "SERVER_ALLOW_MANUAL_SCAN": false,
    "SERVER_FILE_EXIST_PATH_MAPPINGS": {
        "/home/thompsons/plexdrive": [
            "/data"
        ]
    },
    "SERVER_IP": "0.0.0.0",
    "SERVER_MAX_FILE_CHECKS": 10,
    "SERVER_PASS": "0c1fa7c986fe48b2bb3aa055cb86f533",
    "SERVER_PATH_MAPPINGS": {
        "/mnt/unionfs": [
            "/home/seed/media/fused"
        ]
    },
    "SERVER_PORT": 3468,
    "SERVER_SCAN_DELAY": 5,
    "USE_DOCKER": false,
    "USE_SUDO": true
}

Output: Config output

Plex

Ensure the PLEX_LD_LIBRARY_PATH / PLEX_SCANNER / PLEX_SUPPORT_DIR variables are the correct locations (the defaults should be preset). You can verify this is working correctly by doing, python scan.py sections which will return a list of your Plex library Section Names & IDs.

PLEX_USER is self explanatory, again this should be fine as the default plex. Ignore for Windows installations

PLEX_TOKEN only needs to be used in conjunction with PLEX_EMPTY_TRASH and PLEX_LOCAL_URL. For more on how to retrieve this, visit https://support.plex.tv/hc/en-us/articles/204059436-Finding-an-authentication-token-X-Plex-Token

PLEX_LOCAL_URL is the local url of plex server where the empty trash request is sent.

PLEX_EMPTY_TRASH when set to true, after a scan was performed, empty trash will also be performed for that section. PLEX_DATABASE_PATH and PLEX_EMPTY_TRASH_MAX_FILES must be set when this is enabled.

PLEX_EMPTY_TRASH_CONTROL_FILES is used before performing an empty trash request, this allows you to specify a list of files that must exist. If they dont then no empty trash request is sent. If this is not needed, you can leave the list empty to disable the check.

PLEX_EMPTY_TRASH_MAX_FILES must be set when using PLEX_EMPTY_TRASH, this value is the maximum deleted items to delete, so if there is more than than this amount deleted items, abort the empty trash.

PLEX_EMPTY_TRASH_ZERO_DELETED if set to True, will always perform an empty trash on the scanned section. If False, trash will only be emptied when the database returns more than 0 deleted items.

PLEX_DATABASE_PATH is the plex library database location. Make sure the user running plex_autoscan has access to this file directly, e.g. chmod -R 777 /var/lib/plexmediaserver or the empty trash will never be performed. On Windows, this database filepath can usually be found at "%LOCALAPPDATA%\Plex Media Server\Plug-in Support\Databases"

PLEX_WAIT_FOR_EXTERNAL_SCANNERS when set to true, the active scanner in the plex_autoscan queue will once the lock is acquired, before a plex scan is commenced, scan the process list looking for existing Plex Media Scanners. If one is found, it will sleep 60 seconds and check again in a constant loop. Once all Plex Media Scanner's are no longer in the process list, the scan will commence, thus continuing the plex_autoscan scan backlog. Note: if USE_DOCKER is enabled, this will not work properly if there is multiple plex dockers being ran, as it will see all the plex scanners being ran in all the containers. So turn this off when using USE_DOCKER unless there is only 1 docker container

DOCKER_NAME is the name of the docker container to execute the plex scanner in, if USE_DOCKER is enabled.

USE_SUDO is on by default. If the user that runs your plex_autoscan server is able to run the Plex CLI Scanner without sudo, you can disable the sudo requirement here. Ignore for Windows installations

USE_DOCKER is off by default. If this is enabled, then docker exec will be used to execute the plex scanner inside the DOCKER_NAME container.

Server

SERVER_IP is the server IP that plex_autoscan will listen on. usually 0.0.0.0 for remote access and 127.0.0.1 for local.

SERVER_PORT is the port that plex_autoscan will listen on.

SERVER_SCAN_DELAY is the seconds that is slept before a scan request can continue.

SERVER_MAX_FILE_CHECKS is an additional check that is performed after the SERVER_SCAN_DELAY. It will check if the file that was requested to be scanned exists, if it does not then it will sleep for 1 minute and check again until this value has been reached. This setting does not work with sonarr until https://github.com/Sonarr/Sonarr/commit/4189bc6f76347aee00db4449dba142ae04961e0a has been merged with master

SERVER_PASS is a random 32 character string generated on config build. This is used in the URL given to sonarr/radarr of plex_autoscan server.

SERVER_PATH_MAPPINGS is a list of paths that will be remapped before being scanned. This is useful for receiving scan requests from a remote sonarr/radarr installation. Lets take for example:

    "SERVER_PATH_MAPPINGS": {
        "/mnt/unionfs": [
            "/home/seed/media/fused"
        ]
    },

If the filepath that was reported to plex_autoscan by sonarr/radarr was /home/seed/media/fused/Movies/Die Hard/Die Hard.mkv then the path that would be scanned by plex would become /mnt/unionfs/Movies/Die Hard/Die Hard.mkv.

SERVER_FILE_EXIST_PATH_MAPPINGS this is exactly like the option above, but for the file exist checks. this is useful when using docker, because the folder being scanned by the plex container, may be different to the path on the host system running plex_autoscan. This config option allows you to specify a path mapping to be used exclusively for the file exist checks, and then continue using the remapped path using the setting above for the plex scanner. You can leave this empty if it is not required.

SERVER_ALLOW_MANUAL_SCAN when set to true will allow GET requests to the webhook URL where you can perform manual scans on a filepath. Remember all path mappings and section id mappings of server apply. So this is a good way of testing your configuration manually. You can either visit your webhook url in a browser, or initiate a scan by curl e.g. curl -d "eventType=Manual&filepath=/mnt/unionfs/Media/Movies/Shut In (20166f533t In (2016) - Bluray-1080p.x264.DTS-GECKOS.mkv" http://localhost:3468/0c1fa3c9867e48b1bb3aa055cb86

Windows

Windows installations only need to be concerned with the PLEX_SCANNER and PLEX_LIBRARY_PATH if empty trash is being used, ignore the USE_SUDO, PLEX_USER, PLEX_SUPPORT_DIR and PLEX_LD_LIBRARY_PATH variables.

PLEX_SCANNER can usually be found in the C:\Program Files (x86)\Plex folder. You must use double backslashes for this path, e.g. C:\\Program Files (x86)\\Plex\\Plex Scanner.exe

Follow the same guidelines as above but instead of / in paths, use \\, so, /Movies/ becomes \\Movies\\.

Sonarr/Radarr

To setup your sonarr/radarr installations to use plex_autoscan, simply go to Settings -> Connect -> Add New -> Webhook. Untick on Grab and tick Download, Rename, Upgrade. Then enter the url to your server which is normally:

http://SERVER_IP:SERVER_PORT/SERVER_PASS

Sonarr

Startup

Linux

To start the server, simply python scan.py server - this will start the request server. This is good todo too grab a quick file and ensure your configuration is correct, before configuring / starting / enabling the included systemd service file.

Windows

Follow the same steps as above to run the server. As for startup, this can be achieved using the Windows Task Scheduler. Bear in mind however you decide to get your script to startup, it must be executed as a user that has permissions to access the PLEX_SCANNER file, typically Administrator. If this is not the case, it will hang.