Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

worker threads mechanism does not allow for small number of volumes #56

Open
michael-db opened this issue Mar 1, 2021 · 23 comments
Open
Assignees

Comments

@michael-db
Copy link

The external-health-monitor's worker thread mechanism (10 by default) is blind to the number of volumes. If there are fewer than 10 volumes then there is a burst of repeated probes of the same volume: if there is only one then there is a rapid fire succession of 10 probes of the same volume every minute.

This is not a high priority issue.

@xing-yang
Copy link
Contributor

Have you observed this problem on both the controller and agent?

@michael-db
Copy link
Author

I haven't looked at the controller. I was using only the agent. In the PVMonitorAgent code, you will see the checkPVWorker threads started together. Every monitorInterval, one picks an item from the queue, does its check, and requeues it - at which point (if there is only one volume attached to a pod) the next thread immediately pulls the requeued item and does the same thing, and so on, so that there are 10 successive checks for the same volume all at once.

This is not really a problem, it's just noisy and looks like a bug until you know why it's happening. Mitigation would be to reduce threads to 1 and decrease the interval. Ideally, monitorInterval would define an upper bound of on the polling frequency of any given volume, regardless of the number of threads.

@fengzixu
Copy link
Contributor

fengzixu commented Apr 6, 2021

Let me check the code and give your feedback. Thanks for your issue ❤️

@fengzixu
Copy link
Contributor

fengzixu commented Apr 6, 2021

/assign @fengzixu

@michael-db
Copy link
Author

Thank you @fengzixu. Conceptually, this issue would be solved simply by putting the monitor interval delay after the volume is checked and before requeuing it to be checked again - though that would entail some reorganization of the code as it is currently structured.

@fejta-bot
Copy link

Issues go stale after 90d of inactivity.
Mark the issue as fresh with /remove-lifecycle stale.
Stale issues rot after an additional 30d of inactivity and eventually close.

If this issue is safe to close now please do so with /close.

Send feedback to sig-contributor-experience at kubernetes/community.
/lifecycle stale

@k8s-ci-robot k8s-ci-robot added the lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. label Jul 11, 2021
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue or PR as fresh with /remove-lifecycle rotten
  • Close this issue or PR with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

@k8s-ci-robot k8s-ci-robot added lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. and removed lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. labels Aug 10, 2021
@fengzixu
Copy link
Contributor

/remove-lifecycle rotten

@k8s-ci-robot k8s-ci-robot removed the lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. label Aug 10, 2021
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue or PR as fresh with /remove-lifecycle stale
  • Mark this issue or PR as rotten with /lifecycle rotten
  • Close this issue or PR with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

@k8s-ci-robot k8s-ci-robot added the lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. label Nov 8, 2021
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue or PR as fresh with /remove-lifecycle rotten
  • Close this issue or PR with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

@k8s-ci-robot k8s-ci-robot added lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. and removed lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. labels Dec 8, 2021
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Reopen this issue or PR with /reopen
  • Mark this issue or PR as fresh with /remove-lifecycle rotten
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

@k8s-ci-robot
Copy link
Contributor

@k8s-triage-robot: Closing this issue.

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Reopen this issue or PR with /reopen
  • Mark this issue or PR as fresh with /remove-lifecycle rotten
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

@winrouter
Copy link

the issue remain exist in v0.9.0

@xing-yang
Copy link
Contributor

/reopen

@k8s-ci-robot
Copy link
Contributor

@xing-yang: Reopened this issue.

In response to this:

/reopen

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

@k8s-ci-robot k8s-ci-robot reopened this Jun 8, 2023
@xing-yang
Copy link
Contributor

/remove-lifecycle rotten

@k8s-ci-robot k8s-ci-robot removed the lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. label Jun 8, 2023
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue as fresh with /remove-lifecycle stale
  • Close this issue with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

@k8s-ci-robot k8s-ci-robot added the lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. label Jan 22, 2024
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue as fresh with /remove-lifecycle rotten
  • Close this issue with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

@k8s-ci-robot k8s-ci-robot added lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. and removed lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. labels Feb 21, 2024
@michael-db
Copy link
Author

/remove-lifecycle rotten

@k8s-ci-robot k8s-ci-robot removed the lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. label Feb 21, 2024
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue as fresh with /remove-lifecycle stale
  • Close this issue with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

@k8s-ci-robot k8s-ci-robot added the lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. label May 21, 2024
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

  • Mark this issue as fresh with /remove-lifecycle rotten
  • Close this issue with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

@k8s-ci-robot k8s-ci-robot added lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. and removed lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. labels Jun 20, 2024
@michael-db
Copy link
Author

/remove-lifecycle rotten

@k8s-ci-robot k8s-ci-robot removed the lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. label Jun 20, 2024
@mowangdk
Copy link
Contributor

/assign

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

8 participants