Skip to content

Latest commit

 

History

History
146 lines (112 loc) · 5.39 KB

README.rst

File metadata and controls

146 lines (112 loc) · 5.39 KB
TinyUSB

Build Status Documentation Status License

TinyUSB is an open-source cross-platform USB Host/Device stack for embedded system, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events are deferred then handled in the non-ISR task function.

Please take a look at the online documentation.

stackup
.
├── docs            # Documentation
├── examples        # Sample with Makefile build support
├── hw
│   ├── bsp         # Supported boards source files
│   └── mcu         # Low level mcu core & peripheral drivers
├── lib             # Sources from 3rd party such as freeRTOS, fatfs ...
├── src             # All sources files for TinyUSB stack itself.
├── test            # Unit tests for the stack
└── tools           # Files used internally

Supported MCUs

The stack supports the following MCUs:

  • Allwinner: F1C100s/F1C200s
  • Broadcom: BCM2837, BCM2711
  • Dialog: DA1469x
  • Espressif: ESP32-S2, ESP32-S3
  • GigaDevice: GD32VF103
  • Infineon: XMC4500
  • MicroChip: SAMD11, SAMD21, SAMD51, SAME5x, SAMG55, SAML21, SAML22, SAME7x
  • NordicSemi: nRF52833, nRF52840, nRF5340
  • Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505
  • NXP:
    • iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
    • Kinetis: KL25, K32L2
    • LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55
  • Raspberry Pi: RP2040
  • Renesas: RX63N, RX65N, RX72N
  • Silabs: EFM32GG
  • Sony: CXD56
  • ST: STM32 series: F0, F1, F2, F3, F4, F7, H7, G4, L0, L1, L4, L4+
  • TI: MSP430, MSP432E4, TM4C123
  • ValentyUSB: eptri

Here is the list of Supported Devices that can be used with provided examples.

Device Stack

Supports multiple device configurations by dynamically changing USB descriptors, low power functions such like suspend, resume, and remote wakeup. The following device classes are supported:

  • Audio Class 2.0 (UAC2)
  • Bluetooth Host Controller Interface (BTH HCI)
  • Communication Device Class (CDC)
  • Device Firmware Update (DFU): DFU mode (WIP) and Runtime
  • Human Interface Device (HID): Generic (In & Out), Keyboard, Mouse, Gamepad etc ...
  • Mass Storage Class (MSC): with multiple LUNs
  • Musical Instrument Digital Interface (MIDI)
  • Network with RNDIS, Ethernet Control Model (ECM), Network Control Model (NCM)
  • Test and Measurement Class (USBTMC)
  • Video class 1.5 (UVC): work in progress
  • Vendor-specific class support with generic In & Out endpoints. Can be used with MS OS 2.0 compatible descriptor to load winUSB driver without INF file.
  • WebUSB with vendor-specific class

If you have a special requirement, usbd_app_driver_get_cb() can be used to write your own class driver without modifying the stack. Here is how the RPi team added their reset interface raspberrypi/pico-sdk#197

Host Stack

  • Human Interface Device (HID): Keyboard, Mouse, Generic
  • Mass Storage Class (MSC)
  • Hub currently only supports 1 level of hub (due to my laziness)

OS Abstraction layer

TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) events into a central queue, then processing them later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as Communication Device Class (CDC) FIFO. Therefore the stack needs to use some of the OS's basic APIs. Following OSes are already supported out of the box.

  • No OS
  • FreeRTOS
  • RT-Thread: repo
  • Mynewt Due to the newt package build system, Mynewt examples are better to be on its own repo

Local Docs

License

All TinyUSB sources in the src folder are licensed under MIT license, the Full license is here. However, each file can be individually licensed especially those in lib and hw/mcu folder. Please make sure you understand all the license term for files you use in your project.