Skip to content

Latest commit

 

History

History
71 lines (50 loc) · 4.73 KB

README.md

File metadata and controls

71 lines (50 loc) · 4.73 KB

Modified Anycubic Kobra Neo V1.33 Firmware

Features

  • Increased default extruder max feedrate from 25 to 50 (now retraction speed is not limited to 25mm/s)
  • X and Y default max acceleration increased from 500 to 1000
  • Default X and Y jerk increased from 5 to 8
  • Enabled extra menu items (Leveling->Edit Mesh + Bed Tramming, Configuration->Controller Fan, Advanced Settings, etc...)
  • Enabled "Host Actions" and "Host Action Prompts" with support for the printer UI (allows starting/pausing/resuming of Octoprint prints)
  • Increased probing accuracy by doing multiple probes per point
  • Increased speed for the first Z-probe approach when double-probing
  • Enabled quick home (X and Y homes at the same time)
  • Set default mainboard fan speed to 5 instead of 255 (reverted as I had a few "Heater_ID: 0 - Printer halted" errors, if you'd like to experiment with mainboard fan speed, use the menu item Configuration->Controller Fan)
  • Enable M117 Gcode for setting messages to printer screen
  • Enable M73 Gcode for setting progress bar on printer screen
  • UI changes - black background, removed ugly yellow text color, fixed typos
  • Added personal PID and E-Step values

A note on Linear Advance and why it's not enabled

Unfortunately it seems that uncommenting #define LIN_ADVANCE is not enough to get linear advance to work properly with this version of Marlin and the Kobra Neo. While the feature itself works, there were issues with linear advance and TMC2208 drivers up until around mid 2022, causing the stepper to stall randomly during prints. This PR seemingly fixes the issue, but merging it to Kobra Neo fork causes weird wobbly stepper movement and prints that look awful. Other options include switching from stealthChop on the extruder to spreadCycle, but that causes the stepper to stall too, there's also SQUARE_WAVE_STEPPING but that reduces the stepper steps in half.

There is a fork of mainline Marlin for HC32F46x MCUs (made to work on an Aquila X2), and I've got a base configuration done for Kobra Neo, but that fork currently does not have support for SoftwareSerial (which is needed for Kobra Neo's TMC2208 drivers that are running in UART mode) and TFT SPI (for our LCD display). Currently looking into it to see if I could port those features over.

Download

https://github.com/jokubasver/Kobra_Neo/releases

Flashing

Copy firmware.bin to your microSD card, insert the card with the printer off, turn printer on and wait until you get to the home screen. Afterwards, delete the firmware.bin file from your card.

(IMPORTANT) Before printing

Reset EEPROM

After flashing, I recommend to reset your EEPROM, as I found that even after changing some values in the firmware, the printer still used the old values saved in EEPROM.

Ways to reset EEPROM:

  • Menu->Configuration->Advanced Configuration->Initiliaze EEPROM;
  • Using Prontercace/Octoprint: send M502 and M500;
  • Use the EEPROM Editor plugin in Octoprint

Perform a PID autotune and calibrate your e-steps!

This firmware contains values for my own printer, but even the stock firmware does not have great values.

Even after doing all the hardware and mechanical touch-ups, I was not getting great prints. This was solved by calibrating E-steps, as they were quite off (instead of extruding 100mm of filament, my printer extruded 95mm before calibration), so make sure you do that as well.

PID Autotune using the menu:

  • PID Autotune: Go to Menu->Configuration->Advanced Settings->Temperature
  • select PID Autotune E1, and set your printing temperature. Wait for the Autotune to complete.
  • Now do the same for PID Autotune Bed.
  • Go way back to the Configuration menu and select Store Settings.

PID Autotune using Pronterface/Octoprint

If you'd like to perform PID Autotune using Octoprint or Pronterface, follow: https://teachingtechyt.github.io/calibration.html#pid

E-Step Calibration

To perform E-Step calibration, I reccomend to follow this guide: https://teachingtechyt.github.io/calibration.html#esteps

(Optional) Include your PID and E-step values to firmware

If you are building the firmware yourself, you can include your personal PID and E-step values in the firmware's Configuration.h file: https://github.com/jokubasver/Kobra_Neo/commit/a33ebd921d4031b541fb395de72f8292334ff8a0

Having these values saved in the firmware itself could save a lot of headaches, as If the EEPROM for whatever reason was to clear, your values will not dissapear.

Building

https://www.reddit.com/r/anycubic/comments/y2waxu/tutorial_how_to_build_anycubic_marlin_source_code/

Based on

https://github.com/sjorge/Kobra_Neo_Fw

https://github.com/jojos38/anycubic-kobra-improved-firmware

https://github.com/Auburn/Kobra_Go