Arduino library for the MS5837 pressure sensor. The MS5837 is a tiny SMT pressures sensor from Measurement Specialties that can measure pressure of up to 30 Bar (300m depth) with resolution of 0.2 mbar.
This library also supports the MS5837-02BA which has a much smaller measurement range and is better suited for altitude measurement in air.
Please see the examples for normal operation. Below are the available functions used in the library.
MS5837();
/** Must be called before attempting to operate the sensor.
* Returns true if the sensor was initialized successfully.
*/
bool init();
/** Set model of MS5837 sensor. Valid options are MS5837::MS5837_30BA (default)
* and MS5837::MS5837_02BA.
*/
void setModel(uint8_t model);
/** Provide the density of the working fluid in kg/m^3. Default is for
* seawater. Should be 997 for freshwater.
*/
void setFluidDensity(float density);
/** The read from I2C takes up for 40 ms, so use sparingly is possible.
*/
void read();
/** Pressure returned in mbar or mbar*conversion rate.
*/
float pressure(float conversion = 1.0f);
/** Temperature returned in deg C.
*/
float temperature();
/** Depth returned in meters (valid for operation in incompressible
* liquids only. Uses density that is set for fresh or seawater.
*/
float depth();
/** Altitude returned in meters (valid for operation in air only).
*/
float altitude();
1.0.0 - First release, included in Arduino Library Manager
You can find the MS5837-30BA datasheet here.