mk-deb.sh

#!/bin/bash

#
#  Copyright (c) 2020 NetEase Inc.
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#

set -o errexit

dir=$(pwd)

# step1 清除生成的目录和文件
bazel clean

cleandir=(
    curvefs_python/BUILD
    curvefs_python/tmplib/
    curvesnapshot_python/BUILD
    curvesnapshot_python/tmplib/
    *.deb
    *.whl
    *.tar.gz
    build
)

rm -rf "${cleandir[@]}"

git submodule update --init

# step2 获取tag版本和git提交版本信息
# 获取tag版本
tag_version=$(git status | grep -Ew "HEAD detached at|On branch" | awk '{print $NF}' | awk -F"v" '{print $2}')
if [ -z ${tag_version} ]; then
    echo "not found version info, set version to 9.9.9"
    tag_version=9.9.9
fi

# 获取git提交版本信息
commit_id=$(git rev-parse --short HEAD)
if [ "$1" = "debug" ]; then
    debug="+debug"
else
    debug=""
fi

curve_version=${tag_version}+${commit_id}${debug}

function create_python_wheel() {
    local PYTHON_VER=$(basename $1)
    local curdir=$(pwd)
    local basedir="build/curvefs_${PYTHON_VER}/"

    mkdir -p ${basedir}/tmplib
    mkdir -p ${basedir}/curvefs

    cp ./curvefs_python/tmplib/* ${basedir}/tmplib
    cp ./curvefs_python/setup.py ${basedir}/setup.py
    cp ./curvefs_python/__init__.py ${basedir}/curvefs
    cp ./curvefs_python/curvefs.py ${basedir}/curvefs
    cp ./bazel-bin/curvefs_python/libcurvefs.so ${basedir}/curvefs/_curvefs.so

    cd ${basedir}
    sed -i "s/version-anchor/${curve_version}/g" setup.py

    deps=$(ldd curvefs/_curvefs.so | awk '{ print $1 }' | sed '/^$/d')
    for i in $(find tmplib/ -name "lib*so"); do
        basename=$(basename $i)
        if [[ $deps =~ $basename ]]; then
            echo $i
            cp $i curvefs
        fi
    done

    ${1} setup.py bdist_wheel
    cp dist/*whl ${curdir}

    cd ${curdir}
}

function build_curvefs_python() {
    for bin in "/usr/bin/python3" "/usr/bin/python2"; do
        if [ ! -f ${bin} ]; then
            echo "${bin} not exist"
            continue
        fi

        if ! bash ./curvefs_python/configure.sh $(basename ${bin}); then
            echo "configure for ${bin} failed"
            continue
        fi

        # backup and recover python depends shared libraries
        mkdir -p ./build/py_deps_libs
        cp ./curvefs_python/tmplib/* ./build/py_deps_libs/
        cp ./build/py_deps_libs/* ./curvefs_python/tmplib/

        rm -rf ./bazel-bin/curvefs_python

        if [ "$1" = "release" ]; then
            bazel build curvefs_python:curvefs --copt -DHAVE_ZLIB=1 --copt -O2 \
                --define=with_glog=true --define=libunwind=true --copt -DGFLAGS_NS=google \
                --copt -Wno-error=format-security --copt -DUSE_BTHREAD_MUTEX --linkopt \
                -L${dir}/curvefs_python/tmplib/ --copt -DCURVEVERSION=${curve_version} \
                ${bazelflags}
        else
            bazel build curvefs_python:curvefs --copt -DHAVE_ZLIB=1 --compilation_mode=dbg \
                --define=with_glog=true --define=libunwind=true --copt -DGFLAGS_NS=google \
                --copt -Wno-error=format-security --copt -DUSE_BTHREAD_MUTEX --linkopt \
                -L${dir}/curvefs_python/tmplib/ --copt -DCURVEVERSION=${curve_version} \
                ${bazelflags}
        fi

        create_python_wheel ${bin}
    done
}

# step3 执行编译
bazel_version=$(bazel version | grep "Build label" | awk '{print $3}')
if [ -z ${bazel_version} ]; then
    echo "please install bazel 4.2.2 first"
    exit 1
fi
if [ ${bazel_version} != "4.2.2" ]; then
    echo "bazel version must be 4.2.2"
    echo "current version is ${bazel_version}"
    exit 1
fi
echo "bazel version : ${bazel_version}"

# check gcc version, gcc version must >= 4.8.5
gcc_version_major=$(gcc -dumpversion | awk -F'.' '{print $1}')
gcc_version_minor=$(gcc -dumpversion | awk -F'.' '{print $2}')
gcc_version_pathlevel=$(gcc -dumpversion | awk -F'.' '{print $3}')
if [ ${gcc_version_major} -lt 4 ]; then
    echo "gcc version must >= 4.8.5, current version is "$(gcc -dumpversion)
    exit 1
fi

if [[ ${gcc_version_major} -eq 4 ]] && [[ ${gcc_version_minor} -lt 8 ]]; then
    echo "gcc version must >= 4.8.5, current version is "$(gcc -dumpversion)
    exit 1
fi

if [[ ${gcc_version_major} -eq 4 ]] && [[ ${gcc_version_minor} -eq 8 ]] && [[ ${gcc_version_pathlevel} -lt 5 ]]; then
    echo "gcc version must >= 4.8.5, current version is "$(gcc -dumpversion)
    exit 1
fi
echo "gcc version : "$(gcc -dumpversion)

echo "start compiling"

cd ${dir}/thirdparties/etcdclient &&
    make clean &&
    make all &&
    cd $OLDPWD

cp ${dir}/thirdparties/etcdclient/libetcdclient.h ${dir}/include/etcdclient/etcdclient.h

if [ $(gcc -dumpversion | awk -F'.' '{print $1}') -le 6 ]; then
    bazelflags=''
else
    bazelflags='--copt -faligned-new'
fi

if [ "$1" = "debug" ]; then
    make build stor=bs release=0 dep=1 only=src/*

    fail_count=0
    for python in "python2" "python3"; do
        if ! bash ./curvefs_python/configure.sh ${python}; then
            echo "configure ${python} failed"
            let fail_count++
        fi
    done

    if [[ $fail_count -ge 2 ]]; then
        echo "configure python2/3 failed"
        exit
    fi

    bazel build curvefs_python:curvefs --copt -DHAVE_ZLIB=1 --compilation_mode=dbg \
        --define=with_glog=true --define=libunwind=true --copt -DGFLAGS_NS=google \
        --copt \
        -Wno-error=format-security --copt -DUSE_BTHREAD_MUTEX --linkopt \
        -L${dir}/curvefs_python/tmplib/ --copt -DCURVEVERSION=${curve_version} \
        --linkopt -L/usr/local/lib ${bazelflags}
else
    make build stor=bs release=1 dep=1 only=src/*

    fail_count=0
    for python in "python2" "python3"; do
        if ! bash ./curvefs_python/configure.sh ${python}; then
            echo "configure ${python} failed"
            let fail_count++
        fi
    done

    if [[ $fail_count -ge 2 ]]; then
        echo "configure python2/3 failed"
        exit
    fi

    bazel build curvefs_python:curvefs --copt -DHAVE_ZLIB=1 --copt -O2 \
        --define=with_glog=true --define=libunwind=true --copt -DGFLAGS_NS=google \
        --copt \
        -Wno-error=format-security --copt -DUSE_BTHREAD_MUTEX --linkopt \
        -L${dir}/curvefs_python/tmplib/ --copt -DCURVEVERSION=${curve_version} \
        --linkopt -L/usr/local/lib ${bazelflags}
fi
echo "end compile"

#step4 创建临时目录，拷贝二进制、lib库和配置模板
mkdir build
cp -r curve-mds build/
cp -r curve-chunkserver build/

cp -r curve-sdk build/
cp -r curve-tools build/
cp -r curve-monitor build/
cp -r curve-snapshotcloneserver build/
cp -r curve-nginx build/

mkdir -p build/curve-mds/usr/bin

mkdir -p build/curve-mds/etc/curve
mkdir -p build/curve-mds/usr/lib
mkdir -p build/curve-tools/usr/bin
cp ./bazel-bin/src/mds/main/curvemds build/curve-mds/usr/bin/curve-mds
cp thirdparties/etcdclient/libetcdclient.so \
    build/curve-mds/usr/lib/libetcdclient.so
cp ./bazel-bin/tools/curvefsTool build/curve-mds/usr/bin/curve-tool
cp -r tools/snaptool build/curve-tools/usr/bin/snaptool-lib
cp tools/snaptool/snaptool build/curve-tools/usr/bin/snaptool
chmod a+x build/curve-tools/usr/bin/snaptool
cp ./bazel-bin/src/tools/curve_tool \
    build/curve-tools/usr/bin/curve_ops_tool
mkdir -p build/curve-chunkserver/usr/bin
mkdir -p build/curve-chunkserver/etc/curve
cp ./bazel-bin/src/chunkserver/chunkserver \
    build/curve-chunkserver/usr/bin/curve-chunkserver
cp ./bazel-bin/src/tools/curve_chunkserver_tool \
    build/curve-chunkserver/usr/bin/curve_chunkserver_tool

cp ./bazel-bin/src/tools/curve_format \
    build/curve-chunkserver/usr/bin/curve-format

mkdir -p build/curve-sdk/usr/curvefs
mkdir -p build/curve-sdk/usr/bin
mkdir -p build/curve-sdk/etc/curve
mkdir -p build/curve-sdk/usr/lib
mkdir -p build/curve-sdk/usr/include
cp ./bazel-bin/curvefs_python/libcurvefs.so \
    build/curve-sdk/usr/curvefs/_curvefs.so
cp curvefs_python/curvefs.py build/curve-sdk/usr/curvefs/curvefs.py
cp curvefs_python/__init__.py build/curve-sdk/usr/curvefs/__init__.py
cp curvefs_python/curvefs_tool.py build/curve-sdk/usr/curvefs/curvefs_tool.py
cp curvefs_python/parser.py build/curve-sdk/usr/curvefs/parser.py
cp curvefs_python/curve build/curve-sdk/usr/bin/curve
chmod a+x build/curve-sdk/usr/bin/curve
cp curvefs_python/tmplib/* build/curve-sdk/usr/lib/
cp include/client/libcurve.h build/curve-sdk/usr/include
cp include/client/libcbd.h build/curve-sdk/usr/include
cp include/client/libcurve_define.h build/curve-sdk/usr/include
mkdir -p build/curve-monitor/etc/curve/monitor
cp -r monitor/* build/curve-monitor/etc/curve/monitor
mkdir -p build/curve-snapshotcloneserver/usr/bin
cp ./bazel-bin/src/snapshotcloneserver/snapshotcloneserver \
    build/curve-snapshotcloneserver/usr/bin/curve-snapshotcloneserver

mkdir -p build/curve-nginx/etc/curve/nginx/app/etc
mkdir -p build/curve-nginx/etc/curve/nginx/conf
# step 4.1 prepare for nebd-package
cp -r nebd/nebd-package build/
mkdir -p build/nebd-package/usr/include/nebd
mkdir -p build/nebd-package/usr/bin
mkdir -p build/nebd-package/usr/lib/nebd

mkdir -p k8s/nebd/nebd-package/usr/bin
cp nebd/nebd-package/usr/bin/nebd-daemon k8s/nebd/nebd-package/usr/bin
sed -i '/^baseLogPath=/cbaseLogPath=/var/log/nebd' k8s/nebd/nebd-package/usr/bin/nebd-daemon
cp -r k8s/nebd/nebd-package build/k8s-nebd-package
mkdir -p build/k8s-nebd-package/usr/bin
mkdir -p build/k8s-nebd-package/usr/lib/nebd

for i in $(find bazel-bin/ | grep -w so | grep -v solib | grep -v params | grep -v test | grep -v fake); do
    cp -f $i build/nebd-package/usr/lib/nebd
    cp -f $i build/k8s-nebd-package/usr/lib/nebd
done

cp nebd/src/part1/libnebd.h build/nebd-package/usr/include/nebd
cp bazel-bin/nebd/src/part2/nebd-server build/nebd-package/usr/bin
cp bazel-bin/nebd/src/part2/nebd-server build/k8s-nebd-package/usr/bin

# step 4.2 prepare for curve-nbd package
cp -r nbd/nbd-package build
mkdir -p build/nbd-package/usr/bin
cp bazel-bin/nbd/src/curve-nbd build/nbd-package/usr/bin

cp -r k8s/nbd/nbd-package build/k8s-nbd-package
mkdir -p build/k8s-nbd-package/usr/bin
cp bazel-bin/nbd/src/curve-nbd build/k8s-nbd-package/usr/bin

# step5 记录到debian包的配置文件，打包debian包
version="Version: ${curve_version}"
echo ${version} >>build/curve-mds/DEBIAN/control
echo ${version} >>build/curve-sdk/DEBIAN/control
echo ${version} >>build/curve-chunkserver/DEBIAN/control
echo ${version} >>build/curve-tools/DEBIAN/control
echo ${version} >>build/curve-monitor/DEBIAN/control
echo ${version} >>build/curve-snapshotcloneserver/DEBIAN/control
echo ${version} >>build/curve-nginx/DEBIAN/control
echo ${version} >>build/nebd-package/DEBIAN/control
echo ${version} >>build/k8s-nebd-package/DEBIAN/control
echo ${version} >>build/nbd-package/DEBIAN/control
echo ${version} >>build/k8s-nbd-package/DEBIAN/control

dpkg-deb -b build/curve-mds .
dpkg-deb -b build/curve-sdk .
dpkg-deb -b build/curve-chunkserver .
dpkg-deb -b build/curve-tools .
dpkg-deb -b build/curve-monitor .
dpkg-deb -b build/curve-snapshotcloneserver .
dpkg-deb -b build/curve-nginx .
dpkg-deb -b build/nebd-package .
dpkg-deb -b build/k8s-nebd-package .
dpkg-deb -b build/nbd-package .
dpkg-deb -b build/k8s-nbd-package .

# step6 清理libetcdclient.so编译出现的临时文件
cd ${dir}/thirdparties/etcdclient
make clean
cd ${dir}

# step7 打包python wheel
build_curvefs_python $1