Section 2 Semantic Point Cloud Segmentation
In this workshop, we will perform semantic point cloud segmentation on raw LiDAR data using the deep learning model from the notebooks. In particular, we will take a recording from our test vehicle which is equipped with a Velodyne VLP-32C and we will apply our detection model on the raw sensor data.
The learning goals of this workshop are
- Inspect a rosbag which contains point cloud data
- Learn about ROS2' standard point cloud message definition
points2 - Learn about a simple Python inference node for semantic point cloud segmentation
- Implement a ROS2 publisher which publishes the segmented point cloud
Navigate to the local directory ${REPOSITORY}/docker and execute ./ros2_run.sh. This will start the Docker container, in which ROS and all required libraries are preinstalled. You can stop the container by pressing Ctrl+C in the terminal. If everything is setup correctly you will see the following:
Starting new container...
================================================================================
=== CONTAINER INFORMATION ======================================================
Architecture: x86_64
Ubuntu: 22.04.2 LTS (Jammy Jellyfish)
Python: 3.10.6
ROS: humble
CMake: 3.22.1
CUDA: 12.1.105
cuDNN: 8.9.2
TensorRT: 8.6.1
TensorFlow Python: 2.13.0
TensorFlow C/C++:
PyTorch Python:
PyTorch C/C++:
Available GPUs: 1
name driver_version utilization.gpu [%] utilization.memory [%] memory.used [MiB] memory.total [MiB]
NVIDIA TITAN RTX 470.182.03 0 % 2 % 552 MiB 24217 MiB
===============================================================================
root@******:/home/rosuser/ws/colcon_workspace#
The acdc folder is mounted from your host into the container. Note that your current working directory inside the container is /home/rosuser/ws/colcon_workspace.
Download the file lidar_campus_melaten.db3 from here (1.5 GB).
Save this file to your local directory ${REPOSITORY}/bag. This directory will be mounted into the docker container to the path /home/rosuser/bag.
You can start the docker container now with ./ros2_run.sh (if you haven't already).
Inside the container, you can navigate to /home/rosuser/bag and execute ros2 bag info lidar_campus_melaten.db3 to inspect the rosbag:
~/bag$ ros2 bag info lef_camera_templegraben
Files: lidar_campus_melaten.db3
Bag size: 1.5 GiB
Storage id: sqlite3
Duration: 119.955s
Start: Feb 5 2020 16:25:31.409 (1580916331.409)
End: Feb 5 2020 16:27:31.365 (1580916451.365)
Messages: 1200
Topic information:
Topic: /points2 | Type: sensor_msgs/msg/PointCloud2 | Count: 1199 |
Serialization Format: cdr
Topic: /tf_static | Type: tf2_msgs/msg/TFMessage | Count: 1 |
Serialization Format: cdr
You can see that the rosbag has a duration of 1 minute and 59 seconds and contains 1199 frames of type sensor_msgs/PointCloud2. We will use these point cloud data in this assignment in order to apply semantic point cloud segmentation.
The message definition sensor_msgs/PointCloud2 is ROS' standard point cloud message format. Each message contains a collection of XYZ points, which may also contain additional information such as timestamp, intensity or ring number. Feel free to read the documentation of sensor_msgs/msg/PointCloud2 to learn more details about it.
The code for the image segmentation inference node can be found in the directory src/section_2/pointcloud_segmentation_r2. The structure of this Python package is illustrated in the following:
pointcloud_segmentation_r2/
├── package.xml
├── setup.cfg
├── setup.py
├── config
└── params.yaml
├── assets
│ ├── image1.png
│ ├── image2.png
│ ├── video1.gif
│ └── video2.gif
├── launch
│ └── start_all.launch
├── models
│ ├── class_id_to_rgb.xml
│ └── miou62_squeezeseg
│ ├── saved_model.pb
├── keras_metadata.pb
│ └── variables
│ ├── variables.data-00000-of-00001
│ └── variables.index
└── pointcloud_segmentation_r2
│ |── pointcloud_segmentation.py
| └── __init__.py
├── resource
└── test
The inference node source code is located in pointcloud_segmentation_r2/pointcloud_segmentation.py. The pretrained model is located in the directory models. The launch file and parameters are located in directory launch. The conversion between RGB encoding and class IDs are defined in class_id_to_rgb.xml. Feel free to read all the code, parameters and launch files to get a in-depth understanding how this inference node is working.
Note that the provided point cloud segmentation model is quite similar to the one you have trained in the assignment, but it was trained on a much larger dataset consisting of 40000 training samples.
Now, let's build the package with with colcon build
colcon build --packages-select pointcloud_segmentation_r2 --symlink-installand source the workspace
source install/setup.bashPerfect! Now you will be able to perform inference on point cloud data with this package. Let's go to the next section.
We have already prepared a launch file for you to execute the image segmentation. Please read carefully through the following lines of code.
Contents of the file image_segmentation_r2.launch.py:
import os
from ament_index_python.packages import get_package_share_directory
from launch import LaunchDescription
from launch.actions import DeclareLaunchArgument
from launch_ros.actions import Node
from launch.actions import ExecuteProcess
def generate_launch_description():
# Get the package and params directory
image_segmentation_dir = get_package_share_directory('pointcloud_segmentation_r2')
config = os.path.join(image_segmentation_dir, "config","params.yaml")
# Declare launch arguments
use_sim_time = DeclareLaunchArgument(
'use_sim_time',
default_value='true',
description='Use simulation clock time')
# ROSBAG PLAY node
rosbag_play_node = ExecuteProcess(
cmd=['ros2', 'bag', 'play','--rate', '0.75', '-l',
'/home/rosuser/bag/lidar_campus_melaten',
],
output='screen'
)
# CAMERA SEGMENTATION NODE
pointcloud_segmentation_node = Node(
package='pointcloud_segmentation_r2',
name='pointcloud_segmentation',
executable='pointcloud_segmentation',
output='screen',
parameters=[config]
)
# Create the launch description and populate
ld = LaunchDescription()
# Add the actions to the launch description
ld.add_action(use_sim_time)
ld.add_action(rosbag_play_node)
ld.add_action(pointcloud_segmentation_node)
return ldThis launch file will start the following tasks:
- Replay the rosbag with a speed of 0.75. Feel free to adjust this replay speed depending on the performance of your hardware.
-
Start the
pointcloud_segmentation_pynode with the parameters__ that are necessary for thepointcloud_segmentation_pynode. Note, thatparams.yamlcontains the parameter
do_visualizations: Truewhich will enable an internal visualization of the segmented point cloud. You can also set this value to False and visualize the point cloud with RVIZ.
We can now start the launch file with:
ros2 launch pointcloud_segmentation_r2 pointcloud_segmentation_r2.launch.py You should see now the model's prediction as shown in the image below.
Before we start with the programming exercise, lets get an overview about the point cloud segmentation node pointcloud_segmentation.py.Note, the segmentation node is quite complex and we do not require you to implement any in-depth function. We would like to encourage you to read the code and try to understand what each function is doing. To help you we have generated a little summary about the structure of the inference node.
The inference node is implemented as a Python class called PCLSegmentation. The class has the following member functions. We will give here a short description of each class so you can understand what each class is doing.
-
class PCLSegmentation
Class which implements the point cloud segmentation task. Listens on a topic of type
PointCloud2converts the point cloud to a 2D representation, applies point cloud segmentation and publishes the segmented point cloud on aPointCloud2topic.__init__(self)
Calls all necessary functions for the initialization of the node
def setup(self)
Loads and initializes the segmentation model from a file. Creates subscriber
self.sub_pcland publisherself.pub_segwhich listen and sendPointCloud2load_parameters(self)
Loads all ROS params and stores them as class members attributes,
parse_convert_xml(self, conversion_file_path)
Reads the xml file from directory
convert_xmland constructs all necessary variables for the class ID to color association.def predict(self, pcl_msg)
Callback function which is triggered when a new message of type
PointCloud2arrives at the subscriberself.sub_pclmake_point_field(self)
Helper function to create a
PointCloud2with several fields.rgb_to_float(self, color)
Helper function which can convert a RGB value to a packed float value
hv_in_range(self, x, y, z, fov, fov_type='h')
Function which can apply a field of view (FOV) to points with X, Y, Z values.
pcl_spherical_projection(self, pcl, height, width, num_channels, leftPhi, rightPhi)
Function which does a spherical projection of a 3D point cloud to a 2D representation
In this task, you will have the easy task to implement a publisher for the segmented point cloud. As you may know, the publisher takes specific messages and sends them via the ROS Framework to other processing or visualization nodes.
Read the function setup() in the file pointcloud_segmentation.py. Here all important class members are created that will be called in later during the inference. You can see that we instantiate the segmentation model as self.model.
We also instantiate the subscriber for the /points2 topic as self.sub_pcl. The subscriber is connected with the function self.predict. Whenever a new message of type PointCloud2 arrives on /point2, then the callback self.predict is called.
def setup(self):
# load inference model
self.model = tf.keras.models.load_model(self.model_path)
# create point field for cloud_creator
self.point_field = self.make_point_field()
### START TASK 1 CODE HERE ###
# create publisher for the segmented point cloud, publish on topic "points2_segmented"
# Publish type PointCloud2 data format
### END TASK 1 CODE HERE ###
# create points2 subcriber and listen to topic /points2
self.sub_pcl = self.create_subscription(PointCloud2, "/points2", self.predict, 1)Your task is now to implement a PointCloud2 publisher.
Hints:
- Have a look how a self.create_publisher() works
- We want to send messages on topic
/points2_segmented - We want to send messages of type
PointCloud2which are already imported byfrom sensor_msgs.msg import PointCloud2 - Use a
queue_sizeof 1 - Save the publisher as a class member attribute
Ok, now you should have setup the publisher. Now, we need to call the publisher after we perform inference in order to publish the segmented point cloud on topic /points2_segmented. The following code block is a snippet from function def predict(self, pcl_msg) in the file pointcloud_segmentation.py.
You will now have to call the publisher here
[ ... ]
# create list of points
points = list(zip(x, y, z, i, l, rgb_float))
segmented_pcl_msg = pc2.create_cloud(header=pcl_msg.header,
fields=self.point_field,
points=points)
### START TASK 2 CODE HERE ###
# call publisher to publish "segmented_pcl_msg"
### END TASK 2 CODE HERE###Hints:
- Use
.publish()
Great, so now our inference node also publishes the segmented point cloud and we can now use RVIZ to visualize the segmented point cloud. You can open another terminal and start RVIZ. In RVIZ you could try to visualize the segmented point cloud to obtain an image as shown below.
Hints:
- Add -> By Topic ->
/points2_segmented-PointCloud2-> OK - Set the parameter
Global Options / Fixed Frametovlp16_link - Increase the
Sizeof the points
- You learned about the ROS2 standard definition for point cloud data which is called
sensor_msgs/PointCloud2 - You learned about a simple ROS2 package for semantic point cloud segmentation
- You learned how to write a ROS2 publisher which publishes point cloud data
CLICK TO OPEN INSTRUCTIONS
In this workshop, we will perform semantic point cloud segmentation on raw LiDAR data using the deep learning model from the notebooks. In particular, we will take a recording from our test vehicle which is equipped with a Velodyne VLP-32C and we will apply our detection model on the raw sensor data.
The learning goals of this workshop are
- Inspect a rosbag which contains point cloud data
- Learn about ROS' standard point cloud message definition
points2 - Learn about a simple Python inference node for semantic point cloud segmentation
- Implement a ROS publisher which publishes the segmented point cloud
Navigate to the local directory acdc/docker and execute ./ros1_run.sh. This will start the Docker container, in which ROS and all required libraries are preinstalled. You can stop the container by pressing Ctrl+C in the terminal. If everything is setup correctly you will see the following:
Starting container ...
Starting container in mode: gpu
non-network local connections being added to access control list
Container setup:
- Ubuntu: 20.04.2 LTS (Focal Fossa) (user: rosuser, password: rosuser)
- CUDA: Cuda compilation tools, release 11.2, V11.2.152
- cuDNN: 8.1.0
- TensorRT: 8.0.3
- TensorFlow Python3: 2.6.0 (GPUs available: 1)
- TensorFlow C/C++: 2.6
- ROS: noetic
- CMake: cmake version 3.12.3
Template Commands:
- Create new ROS package: ros-add-package
- Add node to package: ros-add-node
- Add nodelet to package: ros-add-nodelet
- Initialize ROS GitLab repository: ros-init-repo
https://gitlab.ika.rwth-aachen.de/automated-driving/docker#templates
The container is running. Execute the run script again from another terminal to open a shell in the container or press `CTRL-C` to stop the container.
From another terminal, execute ./ros1_run.sh again to open a shell in the running container. You should see this:
Attaching to running container ...
===================================================================
= ROS Docker Container =
===================================================================
This is the image.
rosuser@******:~/ws/catkin_workspace$
The acdc folder is mounted from your host into the container. Note that your current working directory in the container is /home/rosuser/ws/catkin_workspace.
Download the file lidar_campus_melaten.bag from here (1.7 GB).
Save this file to your local directory ${REPOSITORY}/bag. This directory will be mounted into the docker container to the path /home/rosuser/bag.
You can start the docker container now with ./ros1_run.sh (if you haven't already).
Inside the container, you can navigate to /home/rosuser/bag and execute rosbag info lidar_campus_melaten.bag to inspect the rosbag:
~/bag$ rosbag info lidar_campus_melaten.bag
path: lidar_campus_melaten.bag
version: 2.0
duration: 1:59s (119s)
start: Feb 05 2020 16:25:31.41 (1580916331.41)
end: Feb 05 2020 16:27:31.37 (1580916451.37)
size: 1.5 GB
messages: 1200
compression: none [1199/1199 chunks]
types: sensor_msgs/PointCloud2 [1158d486dd51d683ce2f1be655c3c181]
tf2_msgs/TFMessage [94810edda583a504dfda3829e70d7eec]
topics: /points2 1199 msgs : sensor_msgs/PointCloud2
/tf_static 1 msg : tf2_msgs/TFMessage
You can see that the rosbag has a duration of 1 minute and 59 seconds and contains 1199 frames of type sensor_msgs/PointCloud2. We will use these point cloud data in this assignment in order to apply semantic point cloud segmentation.
The message definition sensor_msgs/PointCloud2 is ROS' standard point cloud message format. Each message contains a collection of XYZ points, which may also contain additional information such as timestamp, intensity or ring number. Feel free to read the documentation of sensor_msgs/PointCloud2 to learn more details about it.
The code for the point cloud segmentation inference node can be found in the directory catkin_workspace/src/workshops/section_2/pointcloud_segmentation_py. The structure of this Python package is illustrated in the following:
pointcloud_segmentation_py/
├── CMakeLists.txt
├── package.xml
├── README.md
├── assets
│ ├── image1.png
│ ├── image2.png
│ ├── video1.gif
│ └── video2.gif
├── convert_xml
│ └── class_id_to_rgb.xml
├── launch
│ ├── params.yaml
│ └── start_all.launch
├── models
│ └── miou62_squeezeseg
│ ├── saved_model.pb
│ └── variables
│ ├── variables.data-00000-of-00001
│ └── variables.index
└── src
└── pointcloud_segmentation.py
The inference node source code is located in src/pointcloud_segmentation.py. The pretrained model is located in the directory models. The launch file and parameters are located in directory launch. The conversion between RGB encoding and class IDs are defined in class_id_to_rgb.xml. Feel free to read all the code, parameters and launch files to get a in-depth understanding how this inference node is working.
Note that the provided point cloud segmentation model is quite similar to the one you have trained in the assignment, but it was trained on a much larger dataset consisting of 40000 training samples.
Now, let's build the package with catkin build
catkin build pointcloud_segmentation_pyand source the workspace
source devel/setup.bashPerfect! Now you will be able to perform inference on point cloud data with this package. Let's go to the next section.
We have already prepared a launch file for you to execute the point cloud segmentation model. Please read carefully through the following lines of code.
Contents of the file start_all.launch:
<launch>
<param name ="/use_sim_time" value="true"/>
<!-- PLAY ROSBAG-->
<node
pkg="rosbag"
type="play"
args="--clock -l -r 0.75 /home/rosuser/bag/lidar_campus_melaten.bag"
name="player">
</node>
<!--- PCL SEGMENTATION NODE Parameters -->
<rosparam
command="load"
file="$(find pointcloud_segmentation_py)/launch/params.yaml">
</rosparam>
<!-- PCL SEGMENTATION NODE -->
<node
name="pointcloud_segmentation"
pkg="pointcloud_segmentation_py"
type="pointcloud_segmentation.py"
output="screen">
</node>
</launch>This launch file will start the following tasks:
- Replay the rosbag with a speed of 0.75. Feel free to adjust this replay speed depending on the performance of your hardware.
-
Load the parameters that are necessary for the
pointcloud_segmentation_pynode -
Start the
pointcloud_segmentation_pynode
Note, that params.yaml contains the parameter
do_visualizations: Truewhich will enable an internal visualization of the segmented point cloud. You can also set this value to False and visualize the point cloud with RVIZ.
We can now start the launch file with:
roslaunch pointcloud_segmentation_py start_all.launchYou should see now the model's prediction as shown in the image below.
Before we start with the programming exercise, lets get an overview about the point cloud segmentation node pointcloud_segmentation.py. Note, the segmentation node is quite complex and we do not require you to implement any in-depth function. We would like to encourage you to read the code and try to understand what each function is doing. To help you we have generated a little summary about the structure of the inference node.
The inference node is implemented as a Python class called PCLSegmentation. The class has the following member functions. We will give here a short description of each class so you can understand what each class is doing.
-
class PCLSegmentation
Class which implements the point cloud segmentation task. Listens on a topic of type
PointCloud2converts the point cloud to a 2D representation, applies point cloud segmentation and publishes the segmented point cloud on aPointCloud2topic.__init__(self)
Calls all necessary functions for the initialization of the node
def setup(self)
Loads and initializes the segmentation model from a file. Creates subscriber
self.sub_pcland publisherself.pub_segwhich listen and sendPointCloud2load_parameters(self)
Loads all ROS params and stores them as class members attributes,
parse_convert_xml(self, conversion_file_path)
Reads the xml file from directory
convert_xmland constructs all necessary variables for the class ID to color association.def predict(self, pcl_msg)
Callback function which is triggered when a new message of type
PointCloud2arrives at the subscriberself.sub_pclmake_point_field(self)
Helper function to create a
PointCloud2with several fields.rgb_to_float(self, color)
Helper function which can convert a RGB value to a packed float value
hv_in_range(self, x, y, z, fov, fov_type='h')
Function which can apply a field of view (FOV) to points with X, Y, Z values.
pcl_spherical_projection(self, pcl, height, width, num_channels, leftPhi, rightPhi)
Function which does a spherical projection of a 3D point cloud to a 2D representation
In this task, you will have the easy task to implement a publisher for the segmented point cloud. As you may know, the publisher takes specific messages and sends them via the ROS Framework to other processing or visualization nodes.
Read the function setup() in the file pointcloud_segmentation.py. Here all important class members are created that will be called in later during the inference. You can see that we instantiate the segmentation model as self.model.
We also instantiate the subscriber for the /points2 topic as self.sub_pcl. The subscriber is connected with the function self.predict. Whenever a new message of type PointCloud2 arrives on /point2, then the callback self.predict is called.
def setup(self):
# load inference model
self.model = tf.keras.models.load_model(self.model_path)
# create point field for cloud_creator
self.point_field = self.make_point_field()
### START TASK 1 CODE HERE ###
# create publisher for the segmented point cloud, publish on topic "points2_segmented"
# Publish type PointCloud2 data format
### END TASK 1 CODE HERE ###
# create points2 subcriber and listen to topic /points2
self.sub_pcl = rospy.Subscriber("/points2", PointCloud2, self.predict, queue_size=1)Your task is now to implement a PointCloud2 publisher.
Hints:
- Have a look how a rospy.Publisher() works
- We want to send messages on topic
/points2_segmented - We want to send messages of type
PointCloud2which are already imported byfrom sensor_msgs.msg import PointCloud2 - Use a
queue_sizeof 1 - Save the publisher as a class member attribute
Ok, now you should have setup the publisher. Now, we need to call the publisher after we perform inference in order to publish the segmented point cloud on topic /points2_segmented. The following code block is a snippet from function def predict(self, pcl_msg) in the file pointcloud_segmentation.py.
You will now have to call the publisher here
[ ... ]
# create list of points
points = list(zip(x, y, z, i, l, rgb_float))
segmented_pcl_msg = pc2.create_cloud(header=pcl_msg.header,
fields=self.point_field,
points=points)
### START TASK 2 CODE HERE ###
# call publisher to publish "segmented_pcl_msg"
### END TASK 2 CODE HERE###Hints:
- Use
.publish()
Great, so now our inference node also publishes the segmented point cloud and we can now use RVIZ to visualize the segmented point cloud. You can open another terminal and start RVIZ. In RVIZ you could try to visualize the segmented point cloud to obtain an image as shown below.
Hints:
- Add -> By Topic ->
/points2_segmented-PointCloud2-> OK - Set the parameter
Global Options / Fixed Frametovlp16_link - Increase the
Sizeof the points
- You learned about the ROS standard definition for point cloud data which is called
sensor_msgs/PointCloud2 - You learned about a simple ROS package for semantic point cloud segmentation
- You learned how to write a ROS publisher which publishes point cloud data
