Skip to content
This repository has been archived by the owner on Jan 13, 2023. It is now read-only.
/ ros2_pepper Public archive
forked from esteve/ros2_pepper

Scripts for cross-compiling ROS and ROS2 for Softbank's Pepper

License

Notifications You must be signed in to change notification settings

iamrgroot/ros2_pepper

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

71 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Disclaimer

This repo is not maintained. It is used as a base for my master thesis. Updated instructions for this version can also be found on that repo.

Changes

  • Separated getting the repos and building the repos to enable editing source code. Not recommended, but an easy fix for small bugs.
  • Added boot_config files
  • Edited Pepper source file

Original README

Introduction

This project contains a set of patches and scripts to compile and run ROS 1 and ROS 2 onboard a Pepper robot, without the need of a tethered computer.

Pre-requirements

Download and extract the NaoQi C++ framework and Softbanks's crosstool chain and point the AL_DIR and ALDE_CTC_CROSS environment variables to their respective paths:

export AL_DIR=/home/NaoQi  <-- Or wherever you installed NaoQi
export ALDE_CTC_CROSS=$AL_DIR/ctc-linux64-atom-2.5.2.74

Prepare cross-compiling environment

We're going to use Docker to set up a container that will compile all the tools for cross-compiling ROS and all of its dependencies. Go to https://https://www.docker.com/community-edition to download it and install it for your Linux distribution.

  1. Clone the project's repository
$ git clone git clone https://github.com/esteve/ros2_pepper.git
$ cd ros2_pepper

ROS 1

Prepare the requirements for ROS 1

The following script will create a Docker image and compile Python interpreters suitable for both the host and the robot.

./prepare_requirements_ros1.sh

Build ROS 1 dependencies

Before we actually build ROS for Pepper, there's a bunch of dependencies we'll need to cross compile which are not available in Softbank's CTC:

  • console_bridge
  • poco
  • tinyxml2
  • urdfdom
  • urdfdom_headers
./build_ros1_dependencies.sh

Build ROS 1

Finally! Type the following, go grab a coffee and after a while you'll have an entire base ROS distro built for Pepper.

./build_ros1.sh

Copy ROS and its dependencies to the robot

By now you should have the following inside .ros-root in the current directory:

  • Python 2.7 built for Pepper (.ros-root/Python-2.7.13)
  • All the dependencies required by ROS (.ros-root/ros1_dependencies)
  • A ROS workspace with ROS Kinetic built for Pepper (.ros-root/ros1_inst)
  • A helper script that will set up the ROS workspace in the robot (.ros-root/setup_ros1_pepper.bash)

We're going to copy these to the robot, assuming that your robot is connected to your network, type the following:

$ scp -r .ros-root nao@IP_ADDRESS_OF_YOUR_ROBOT:.ros-root

Run ROS 1 from inside Pepper

Now that we have it all in the robot, let's give it a try:

SSH into the robot

$ ssh nao@IP_ADDRESS_OF_YOUR_ROBOT

Source (not run) the setup script

$ source .ros-root/setup_ros1_pepper.bash

Start naoqi_driver, note that NETWORK_INTERFACE may be either wlan0 or eth0, pick the appropriate interface if your robot is connected via wifi or ethernet

$ roslaunch naoqi_driver naoqi_driver.launch nao_ip:=IP_ADDRESS_OF_YOUR_ROBOT \
    roscore_ip:=IP_ADDRESS_OF_YOUR_ROBOT network_interface:=NETWORK_INTERFACE

ROS 2

BEWARE: The ROS 2 port is still experimental and incomplete, simple sensors such as the bumpers work, but the camera driver has not been ported yet.

The following instructions require that you have ROS 1 built for Pepper.

Prepare the requirements for ROS 2

The following script will create a Docker image and compile Python interpreters suitable for both the host and the robot.

./prepare_requirements_ros2.sh

Build ROS 2

Let's now build ROS 2 for Pepper:

./build_ros2.sh

Copy ROS 2 and its dependencies to the robot

Besides the ROS 1 binaries and its dependencies, we'll now a few more directories inside .ros-root in our current directory:

  • Python 3.6 built for Pepper (.ros-root/Python-3.6.1)
  • A ROS 2 workspace built for Pepper (.ros-root/ros2_inst)

We're going to copy these to the robot, assuming that your robot is connected to your network, type the following:

$ scp -r .ros-root nao@IP_ADDRESS_OF_YOUR_ROBOT:.ros-root

Run ROS 2 from inside Pepper

Now that we have it all in the robot, let's give it a try:

SSH into the robot

$ ssh nao@IP_ADDRESS_OF_YOUR_ROBOT

Source (not run) the setup script

$ source .ros-root/setup_ros2_pepper.bash

ROS 2 does not have a something like roslaunch yet, so you'll have to run naoqi_driver directly:

Start naoqi_driver, note that NETWORK_INTERFACE may be either wlan0 or eth0, pick the appropriate interface if your robot is connected via wifi or ethernet

$ naoqi_driver_node --qi-url=tcp://IP_ADDRESS_OF_YOUR_ROBOT:9559 \
    --roscore_ip=IP_ADDRESS_OF_YOUR_ROBOT --network_interface=NETWORK_INTERFACE \
    --namespace=naoqi_driver

Demos

The folks at the Universidad Rey Juan Carlos and Intelligent Robotics have produced the following video showing a Pepper robot runnning ROS onboard using the code from this repository:

Pepper Navigation

Enjoy!

About

Scripts for cross-compiling ROS and ROS2 for Softbank's Pepper

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 72.1%
  • CMake 27.9%