kube-scheduler源码分析（五）之 PrioritizeNodes

以下代码分析基于 kubernetes v1.12.0 版本。

本文主要分析优选策略逻辑，即从预选的节点中选择出最优的节点。优选策略的具体实现函数为PrioritizeNodes。PrioritizeNodes最终返回是一个记录了各个节点分数的列表。

1. 调用入口

genericScheduler.Schedule中对PrioritizeNodes的调用过程如下：

此部分代码位于pkg/scheduler/core/generic_scheduler.go

func (g *genericScheduler) Schedule(pod *v1.Pod, nodeLister algorithm.NodeLister) (string, error) {
  ...
	trace.Step("Prioritizing")
	startPriorityEvalTime := time.Now()
	// When only one node after predicate, just use it.
	if len(filteredNodes) == 1 {
		metrics.SchedulingAlgorithmPriorityEvaluationDuration.Observe(metrics.SinceInMicroseconds(startPriorityEvalTime))
		return filteredNodes[0].Name, nil
	}

	metaPrioritiesInterface := g.priorityMetaProducer(pod, g.cachedNodeInfoMap)
  // 执行优选逻辑的操作，返回记录各个节点分数的列表
	priorityList, err := PrioritizeNodes(pod, g.cachedNodeInfoMap, metaPrioritiesInterface, g.prioritizers, filteredNodes, g.extenders)
	if err != nil {
		return "", err
	}
	metrics.SchedulingAlgorithmPriorityEvaluationDuration.Observe(metrics.SinceInMicroseconds(startPriorityEvalTime))
	metrics.SchedulingLatency.WithLabelValues(metrics.PriorityEvaluation).Observe(metrics.SinceInSeconds(startPriorityEvalTime))
  ...
}

核心代码：

// 基于预选节点filteredNodes进一步筛选优选的节点，返回记录各个节点分数的列表
priorityList, err := PrioritizeNodes(pod, g.cachedNodeInfoMap, metaPrioritiesInterface, g.prioritizers, filteredNodes, g.extenders)

2. PrioritizeNodes

优选，从满足的节点中选择出最优的节点。PrioritizeNodes最终返回是一个记录了各个节点分数的列表。

具体操作如下：

PrioritizeNodes通过并行运行各个优先级函数来对节点进行优先级排序。
每个优先级函数会给节点打分，打分范围为0-10分。
0 表示优先级最低的节点，10表示优先级最高的节点。
每个优先级函数也有各自的权重。
优先级函数返回的节点分数乘以权重以获得加权分数。
最后组合（添加）所有分数以获得所有节点的总加权分数。

PrioritizeNodes主要流程如下：

如果没有设置优选函数和拓展函数，则全部节点设置相同的分数，直接返回。
依次给node执行map函数进行打分。
再对上述map函数的执行结果执行reduce函数计算最终得分。
最后根据不同优先级函数的权重对得分取加权平均数。

入参：

pod
nodeNameToInfo
meta interface{},
priorityConfigs
nodes
extenders

出参：

HostPriorityList：记录节点分数的列表。

HostPriority定义如下:

// HostPriority represents the priority of scheduling to a particular host, higher priority is better.
type HostPriority struct {
	// Name of the host
	Host string
	// Score associated with the host
	Score int
}

PrioritizeNodes完整代码如下：

此部分代码位于pkg/scheduler/core/generic_scheduler.go

// PrioritizeNodes prioritizes the nodes by running the individual priority functions in parallel.
// Each priority function is expected to set a score of 0-10
// 0 is the lowest priority score (least preferred node) and 10 is the highest
// Each priority function can also have its own weight
// The node scores returned by the priority function are multiplied by the weights to get weighted scores
// All scores are finally combined (added) to get the total weighted scores of all nodes
func PrioritizeNodes(
	pod *v1.Pod,
	nodeNameToInfo map[string]*schedulercache.NodeInfo,
	meta interface{},
	priorityConfigs []algorithm.PriorityConfig,
	nodes []*v1.Node,
	extenders []algorithm.SchedulerExtender,
) (schedulerapi.HostPriorityList, error) {
	// If no priority configs are provided, then the EqualPriority function is applied
	// This is required to generate the priority list in the required format
	if len(priorityConfigs) == 0 && len(extenders) == 0 {
		result := make(schedulerapi.HostPriorityList, 0, len(nodes))
		for i := range nodes {
			hostPriority, err := EqualPriorityMap(pod, meta, nodeNameToInfo[nodes[i].Name])
			if err != nil {
				return nil, err
			}
			result = append(result, hostPriority)
		}
		return result, nil
	}

	var (
		mu   = sync.Mutex{}
		wg   = sync.WaitGroup{}
		errs []error
	)
	appendError := func(err error) {
		mu.Lock()
		defer mu.Unlock()
		errs = append(errs, err)
	}

	results := make([]schedulerapi.HostPriorityList, len(priorityConfigs), len(priorityConfigs))

	for i, priorityConfig := range priorityConfigs {
		if priorityConfig.Function != nil {
			// DEPRECATED
			wg.Add(1)
			go func(index int, config algorithm.PriorityConfig) {
				defer wg.Done()
				var err error
				results[index], err = config.Function(pod, nodeNameToInfo, nodes)
				if err != nil {
					appendError(err)
				}
			}(i, priorityConfig)
		} else {
			results[i] = make(schedulerapi.HostPriorityList, len(nodes))
		}
	}
	processNode := func(index int) {
		nodeInfo := nodeNameToInfo[nodes[index].Name]
		var err error
		for i := range priorityConfigs {
			if priorityConfigs[i].Function != nil {
				continue
			}
			results[i][index], err = priorityConfigs[i].Map(pod, meta, nodeInfo)
			if err != nil {
				appendError(err)
				return
			}
		}
	}
	workqueue.Parallelize(16, len(nodes), processNode)
	for i, priorityConfig := range priorityConfigs {
		if priorityConfig.Reduce == nil {
			continue
		}
		wg.Add(1)
		go func(index int, config algorithm.PriorityConfig) {
			defer wg.Done()
			if err := config.Reduce(pod, meta, nodeNameToInfo, results[index]); err != nil {
				appendError(err)
			}
			if glog.V(10) {
				for _, hostPriority := range results[index] {
					glog.Infof("%v -> %v: %v, Score: (%d)", pod.Name, hostPriority.Host, config.Name, hostPriority.Score)
				}
			}
		}(i, priorityConfig)
	}
	// Wait for all computations to be finished.
	wg.Wait()
	if len(errs) != 0 {
		return schedulerapi.HostPriorityList{}, errors.NewAggregate(errs)
	}

	// Summarize all scores.
	result := make(schedulerapi.HostPriorityList, 0, len(nodes))

	for i := range nodes {
		result = append(result, schedulerapi.HostPriority{Host: nodes[i].Name, Score: 0})
		for j := range priorityConfigs {
			result[i].Score += results[j][i].Score * priorityConfigs[j].Weight
		}
	}

	if len(extenders) != 0 && nodes != nil {
		combinedScores := make(map[string]int, len(nodeNameToInfo))
		for _, extender := range extenders {
			if !extender.IsInterested(pod) {
				continue
			}
			wg.Add(1)
			go func(ext algorithm.SchedulerExtender) {
				defer wg.Done()
				prioritizedList, weight, err := ext.Prioritize(pod, nodes)
				if err != nil {
					// Prioritization errors from extender can be ignored, let k8s/other extenders determine the priorities
					return
				}
				mu.Lock()
				for i := range *prioritizedList {
					host, score := (*prioritizedList)[i].Host, (*prioritizedList)[i].Score
					combinedScores[host] += score * weight
				}
				mu.Unlock()
			}(extender)
		}
		// wait for all go routines to finish
		wg.Wait()
		for i := range result {
			result[i].Score += combinedScores[result[i].Host]
		}
	}

	if glog.V(10) {
		for i := range result {
			glog.V(10).Infof("Host %s => Score %d", result[i].Host, result[i].Score)
		}
	}
	return result, nil
}

以下对PrioritizeNodes分段进行分析。

3. EqualPriorityMap

如果没有提供优选函数和拓展函数，则将所有的节点设置为相同的优先级，即节点的score都为1，然后直接返回结果。(但一般情况下优选函数列表都不为空)

// If no priority configs are provided, then the EqualPriority function is applied
// This is required to generate the priority list in the required format
if len(priorityConfigs) == 0 && len(extenders) == 0 {
	result := make(schedulerapi.HostPriorityList, 0, len(nodes))
	for i := range nodes {
		hostPriority, err := EqualPriorityMap(pod, meta, nodeNameToInfo[nodes[i].Name])
		if err != nil {
			return nil, err
		}
		result = append(result, hostPriority)
	}
	return result, nil
}

EqualPriorityMap具体实现如下：

// EqualPriorityMap is a prioritizer function that gives an equal weight of one to all nodes
func EqualPriorityMap(_ *v1.Pod, _ interface{}, nodeInfo *schedulercache.NodeInfo) (schedulerapi.HostPriority, error) {
	node := nodeInfo.Node()
	if node == nil {
		return schedulerapi.HostPriority{}, fmt.Errorf("node not found")
	}
	return schedulerapi.HostPriority{
		Host:  node.Name,
		Score: 1,
	}, nil
}

4. processNode

processNode就是基于index拿出node的信息，调用之前注册的各种优选函数（此处是mapFunction），通过优选函数对node和pod进行处理，最后返回一个记录node分数的列表result。processNode同样也使用workqueue.Parallelize来进行并行处理。(processNode类似于预选逻辑findNodesThatFit中使用到的checkNode的作用)

其中优选函数是通过priorityConfigs来记录，每类优选函数包括PriorityMapFunction和PriorityReduceFunction两种函数。优选函数的注册部分可参考registerAlgorithmProvider。

processNode := func(index int) {
	nodeInfo := nodeNameToInfo[nodes[index].Name]
	var err error
	for i := range priorityConfigs {
		if priorityConfigs[i].Function != nil {
			continue
		}
		results[i][index], err = priorityConfigs[i].Map(pod, meta, nodeInfo)
		if err != nil {
			appendError(err)
			return
		}
	}
}
// 并行执行processNode
workqueue.Parallelize(16, len(nodes), processNode)

priorityConfigs定义如下：

核心属性：

Map ：PriorityMapFunction
Reduce：PriorityReduceFunction

// PriorityConfig is a config used for a priority function.
type PriorityConfig struct {
	Name   string
	Map    PriorityMapFunction   
	Reduce PriorityReduceFunction
	// TODO: Remove it after migrating all functions to
	// Map-Reduce pattern.
	Function PriorityFunction
	Weight   int
}

具体的优选函数处理逻辑待下文分析，本文会以NewSelectorSpreadPriority函数为例。

5. PriorityMapFunction

PriorityMapFunction是一个计算给定节点的每个节点结果的函数。

PriorityMapFunction定义如下：

// PriorityMapFunction is a function that computes per-node results for a given node.
// TODO: Figure out the exact API of this method.
// TODO: Change interface{} to a specific type.
type PriorityMapFunction func(pod *v1.Pod, meta interface{}, nodeInfo *schedulercache.NodeInfo) (schedulerapi.HostPriority, error)

PriorityMapFunction是在processNode中调用的，代码如下：

results[i][index], err = priorityConfigs[i].Map(pod, meta, nodeInfo)

下文会分析NewSelectorSpreadPriority在的map函数CalculateSpreadPriorityMap。

6. PriorityReduceFunction

PriorityReduceFunction是一个聚合每个节点结果并计算所有节点的最终得分的函数。

PriorityReduceFunction定义如下：

// PriorityReduceFunction is a function that aggregated per-node results and computes
// final scores for all nodes.
// TODO: Figure out the exact API of this method.
// TODO: Change interface{} to a specific type.
type PriorityReduceFunction func(pod *v1.Pod, meta interface{}, nodeNameToInfo map[string]*schedulercache.NodeInfo, result schedulerapi.HostPriorityList) error

PrioritizeNodes中对reduce函数调用部分如下：

for i, priorityConfig := range priorityConfigs {
	if priorityConfig.Reduce == nil {
		continue
	}
	wg.Add(1)
	go func(index int, config algorithm.PriorityConfig) {
		defer wg.Done()
		if err := config.Reduce(pod, meta, nodeNameToInfo, results[index]); err != nil {
			appendError(err)
		}
		if glog.V(10) {
			for _, hostPriority := range results[index] {
				glog.Infof("%v -> %v: %v, Score: (%d)", pod.Name, hostPriority.Host, config.Name, hostPriority.Score)
			}
		}
	}(i, priorityConfig)
}

下文会分析NewSelectorSpreadPriority在的reduce函数CalculateSpreadPriorityReduce。

7. Summarize all scores

先等待计算完成再计算加权平均数。

// Wait for all computations to be finished.
wg.Wait()
if len(errs) != 0 {
	return schedulerapi.HostPriorityList{}, errors.NewAggregate(errs)
}

计算所有节点的加权平均数。

// Summarize all scores.
result := make(schedulerapi.HostPriorityList, 0, len(nodes))

for i := range nodes {
	result = append(result, schedulerapi.HostPriority{Host: nodes[i].Name, Score: 0})
	for j := range priorityConfigs {
		result[i].Score += results[j][i].Score * priorityConfigs[j].Weight
	}
}

当设置了拓展的计算方式，则增加拓展计算方式的加权平均数。

if len(extenders) != 0 && nodes != nil {
	combinedScores := make(map[string]int, len(nodeNameToInfo))
	for _, extender := range extenders {
		if !extender.IsInterested(pod) {
			continue
		}
		wg.Add(1)
		go func(ext algorithm.SchedulerExtender) {
			defer wg.Done()
			prioritizedList, weight, err := ext.Prioritize(pod, nodes)
			if err != nil {
				// Prioritization errors from extender can be ignored, let k8s/other extenders determine the priorities
				return
			}
			mu.Lock()
			for i := range *prioritizedList {
				host, score := (*prioritizedList)[i].Host, (*prioritizedList)[i].Score
				combinedScores[host] += score * weight
			}
			mu.Unlock()
		}(extender)
	}
	// wait for all go routines to finish
	wg.Wait()
	for i := range result {
		result[i].Score += combinedScores[result[i].Host]
	}
}

8. NewSelectorSpreadPriority

以下以NewSelectorSpreadPriority这个优选函数来做分析，其他重要的优选函数待后续专门分析。

NewSelectorSpreadPriority主要的功能是将属于相同service和rs下的pod尽量分布在不同的node上。

该函数的注册代码如下：

此部分代码位于pkg/scheduler/algorithmprovider/defaults/defaults.go

// ServiceSpreadingPriority is a priority config factory that spreads pods by minimizing
// the number of pods (belonging to the same service) on the same node.
// Register the factory so that it's available, but do not include it as part of the default priorities
// Largely replaced by "SelectorSpreadPriority", but registered for backward compatibility with 1.0
factory.RegisterPriorityConfigFactory(
	"ServiceSpreadingPriority",
	factory.PriorityConfigFactory{
		MapReduceFunction: func(args factory.PluginFactoryArgs) (algorithm.PriorityMapFunction, algorithm.PriorityReduceFunction) {
			return priorities.NewSelectorSpreadPriority(args.ServiceLister, algorithm.EmptyControllerLister{}, algorithm.EmptyReplicaSetLister{}, algorithm.EmptyStatefulSetLister{})
		},
		Weight: 1,
	},
)

NewSelectorSpreadPriority的具体实现如下：

此部分代码位于pkg/scheduler/algorithm/priorities/selector_spreading.go

// NewSelectorSpreadPriority creates a SelectorSpread.
func NewSelectorSpreadPriority(
	serviceLister algorithm.ServiceLister,
	controllerLister algorithm.ControllerLister,
	replicaSetLister algorithm.ReplicaSetLister,
	statefulSetLister algorithm.StatefulSetLister) (algorithm.PriorityMapFunction, algorithm.PriorityReduceFunction) {
	selectorSpread := &SelectorSpread{
		serviceLister:     serviceLister,
		controllerLister:  controllerLister,
		replicaSetLister:  replicaSetLister,
		statefulSetLister: statefulSetLister,
	}
	return selectorSpread.CalculateSpreadPriorityMap, selectorSpread.CalculateSpreadPriorityReduce
}

NewSelectorSpreadPriority主要包括map和reduce两种函数，分别对应CalculateSpreadPriorityMap，CalculateSpreadPriorityReduce。

8.1. CalculateSpreadPriorityMap

CalculateSpreadPriorityMap的主要作用是将相同service、RC、RS或statefulset的pod分布在不同的节点上。当调度一个pod的时候，先寻找与该pod匹配的service、RS、RC或statefulset，然后寻找与其selector匹配的已存在的pod，寻找存在这类pod最少的节点。

基本流程如下：

寻找与该pod对应的service、RS、RC、statefulset匹配的selector。
遍历当前节点的所有pod，将该节点上已存在的selector匹配到的pod的个数作为该节点的分数（此时，分数大的表示匹配到的pod越多，越不符合被调度的条件，该分数在reduce阶段会被按10分制处理成分数大的越符合被调度的条件）。

此部分代码位于pkg/scheduler/algorithm/priorities/selector_spreading.go

// CalculateSpreadPriorityMap spreads pods across hosts, considering pods
// belonging to the same service,RC,RS or StatefulSet.
// When a pod is scheduled, it looks for services, RCs,RSs and StatefulSets that match the pod,
// then finds existing pods that match those selectors.
// It favors nodes that have fewer existing matching pods.
// i.e. it pushes the scheduler towards a node where there's the smallest number of
// pods which match the same service, RC,RSs or StatefulSets selectors as the pod being scheduled.
func (s *SelectorSpread) CalculateSpreadPriorityMap(pod *v1.Pod, meta interface{}, nodeInfo *schedulercache.NodeInfo) (schedulerapi.HostPriority, error) {
	var selectors []labels.Selector
	node := nodeInfo.Node()
	if node == nil {
		return schedulerapi.HostPriority{}, fmt.Errorf("node not found")
	}

	priorityMeta, ok := meta.(*priorityMetadata)
	if ok {
		selectors = priorityMeta.podSelectors
	} else {
		selectors = getSelectors(pod, s.serviceLister, s.controllerLister, s.replicaSetLister, s.statefulSetLister)
	}

	if len(selectors) == 0 {
		return schedulerapi.HostPriority{
			Host:  node.Name,
			Score: int(0),
		}, nil
	}

	count := int(0)
	for _, nodePod := range nodeInfo.Pods() {
		if pod.Namespace != nodePod.Namespace {
			continue
		}
		// When we are replacing a failed pod, we often see the previous
		// deleted version while scheduling the replacement.
		// Ignore the previous deleted version for spreading purposes
		// (it can still be considered for resource restrictions etc.)
		if nodePod.DeletionTimestamp != nil {
			glog.V(4).Infof("skipping pending-deleted pod: %s/%s", nodePod.Namespace, nodePod.Name)
			continue
		}
		for _, selector := range selectors {
			if selector.Matches(labels.Set(nodePod.ObjectMeta.Labels)) {
				count++
				break
			}
		}
	}
	return schedulerapi.HostPriority{
		Host:  node.Name,
		Score: int(count),
	}, nil
}

以下分段分析：

先获得selector。

selectors = getSelectors(pod, s.serviceLister, s.controllerLister, s.replicaSetLister, s.statefulSetLister)

计算节点上匹配selector的pod的个数，作为该节点分数，该分数并不是最终节点的分数，只是中间过渡的记录状态。

count := int(0)
for _, nodePod := range nodeInfo.Pods() {
	...
	for _, selector := range selectors {
		if selector.Matches(labels.Set(nodePod.ObjectMeta.Labels)) {
			count++
			break
		}
	}
}

8.2. CalculateSpreadPriorityReduce

CalculateSpreadPriorityReduce根据节点上现有匹配pod的数量计算每个节点的十分制的分数，具有较少现有匹配pod的节点的分数越高，表示节点越可能被调度到。

基本流程如下：

记录所有节点中匹配到pod个数最多的节点的分数（即匹配到的pod最多的个数）。
遍历所有的节点，按比例取十分制的得分，计算方式为：(节点中最多匹配pod的个数-当前节点pod的个数)/节点中最多匹配pod的个数。此时，分数越高表示该节点上匹配到的pod的个数越少，越可能被调度到，即满足把相同selector的pod分散到不同节点的需求。

此部分代码位于pkg/scheduler/algorithm/priorities/selector_spreading.go

// CalculateSpreadPriorityReduce calculates the source of each node
// based on the number of existing matching pods on the node
// where zone information is included on the nodes, it favors nodes
// in zones with fewer existing matching pods.
func (s *SelectorSpread) CalculateSpreadPriorityReduce(pod *v1.Pod, meta interface{}, nodeNameToInfo map[string]*schedulercache.NodeInfo, result schedulerapi.HostPriorityList) error {
	countsByZone := make(map[string]int, 10)
	maxCountByZone := int(0)
	maxCountByNodeName := int(0)

	for i := range result {
		if result[i].Score > maxCountByNodeName {
			maxCountByNodeName = result[i].Score
		}
		zoneID := utilnode.GetZoneKey(nodeNameToInfo[result[i].Host].Node())
		if zoneID == "" {
			continue
		}
		countsByZone[zoneID] += result[i].Score
	}

	for zoneID := range countsByZone {
		if countsByZone[zoneID] > maxCountByZone {
			maxCountByZone = countsByZone[zoneID]
		}
	}

	haveZones := len(countsByZone) != 0

	maxCountByNodeNameFloat64 := float64(maxCountByNodeName)
	maxCountByZoneFloat64 := float64(maxCountByZone)
	MaxPriorityFloat64 := float64(schedulerapi.MaxPriority)

	for i := range result {
		// initializing to the default/max node score of maxPriority
		fScore := MaxPriorityFloat64
		if maxCountByNodeName > 0 {
			fScore = MaxPriorityFloat64 * (float64(maxCountByNodeName-result[i].Score) / maxCountByNodeNameFloat64)
		}
		// If there is zone information present, incorporate it
		if haveZones {
			zoneID := utilnode.GetZoneKey(nodeNameToInfo[result[i].Host].Node())
			if zoneID != "" {
				zoneScore := MaxPriorityFloat64
				if maxCountByZone > 0 {
					zoneScore = MaxPriorityFloat64 * (float64(maxCountByZone-countsByZone[zoneID]) / maxCountByZoneFloat64)
				}
				fScore = (fScore * (1.0 - zoneWeighting)) + (zoneWeighting * zoneScore)
			}
		}
		result[i].Score = int(fScore)
		if glog.V(10) {
			glog.Infof(
				"%v -> %v: SelectorSpreadPriority, Score: (%d)", pod.Name, result[i].Host, int(fScore),
			)
		}
	}
	return nil
}

以下分段分析：

先获取所有节点中匹配到的pod最多的个数。

for i := range result {
	if result[i].Score > maxCountByNodeName {
		maxCountByNodeName = result[i].Score
	}
	zoneID := utilnode.GetZoneKey(nodeNameToInfo[result[i].Host].Node())
	if zoneID == "" {
		continue
	}
	countsByZone[zoneID] += result[i].Score
}

遍历所有的节点，按比例取十分制的得分。

for i := range result {
	// initializing to the default/max node score of maxPriority
	fScore := MaxPriorityFloat64
	if maxCountByNodeName > 0 {
		fScore = MaxPriorityFloat64 * (float64(maxCountByNodeName-result[i].Score) / maxCountByNodeNameFloat64)
	}
  ...
}

9. 总结

优选，从满足的节点中选择出最优的节点。PrioritizeNodes最终返回是一个记录了各个节点分数的列表。

9.1. PrioritizeNodes

主要流程如下：

如果没有设置优选函数和拓展函数，则全部节点设置相同的分数，直接返回。
依次给node执行map函数进行打分。
再对上述map函数的执行结果执行reduce函数计算最终得分。
最后根据不同优先级函数的权重对得分取加权平均数。

其中每类优选函数会包含map函数和reduce函数两种。

9.2. NewSelectorSpreadPriority

其中以NewSelectorSpreadPriority这个优选函数为例作分析，该函数的功能是将相同service、RS、RC或statefulset下pod尽量分散到不同的节点上。包括map函数和reduce函数两部分，具体如下。

9.2.1. CalculateSpreadPriorityMap

基本流程如下：

寻找与该pod对应的service、RS、RC、statefulset匹配的selector。
遍历当前节点的所有pod，将该节点上已存在的selector匹配到的pod的个数作为该节点的分数（此时，分数大的表示匹配到的pod越多，越不符合被调度的条件，该分数在reduce阶段会被按10分制处理成分数大的越符合被调度的条件）。

9.2.2. CalculateSpreadPriorityReduce

基本流程如下：

记录所有节点中匹配到pod个数最多的节点的分数（即匹配到的pod最多的个数）。
遍历所有的节点，按比例取十分制的得分，计算方式为：(节点中最多匹配pod的个数-当前节点pod的个数)/节点中最多匹配pod的个数。此时，分数越高表示该节点上匹配到的pod的个数越少，越可能被调度到，即满足把相同selector的pod分散到不同节点的需求。

参考：

https://github.com/kubernetes/kubernetes/blob/v1.12.0/pkg/scheduler/core/generic_scheduler.go
https://github.com/kubernetes/kubernetes/blob/v1.12.0/pkg/scheduler/algorithm/priorities/selector_spreading.go

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

PrioritizeNodes.md

PrioritizeNodes.md

kube-scheduler源码分析（五）之 PrioritizeNodes

1. 调用入口

2. PrioritizeNodes

3. EqualPriorityMap

4. processNode

5. PriorityMapFunction

6. PriorityReduceFunction

7. Summarize all scores

8. NewSelectorSpreadPriority

8.1. CalculateSpreadPriorityMap

8.2. CalculateSpreadPriorityReduce

9. 总结

9.1. PrioritizeNodes

9.2. NewSelectorSpreadPriority

9.2.1. CalculateSpreadPriorityMap

9.2.2. CalculateSpreadPriorityReduce

Files

PrioritizeNodes.md

Latest commit

History

PrioritizeNodes.md

File metadata and controls

kube-scheduler源码分析（五）之 PrioritizeNodes

1. 调用入口

2. PrioritizeNodes

3. EqualPriorityMap

4. processNode

5. PriorityMapFunction

6. PriorityReduceFunction

7. Summarize all scores

8. NewSelectorSpreadPriority

8.1. CalculateSpreadPriorityMap

8.2. CalculateSpreadPriorityReduce

9. 总结

9.1. PrioritizeNodes

9.2. NewSelectorSpreadPriority

9.2.1. CalculateSpreadPriorityMap

9.2.2. CalculateSpreadPriorityReduce