Skip to content

Latest commit

 

History

History
52 lines (35 loc) · 3.01 KB

README.md

File metadata and controls

52 lines (35 loc) · 3.01 KB

Caravan

Join the chat at https://gitter.im/merl-caravan/community Documentation Status Apache License GitHub contributors

Caravan intends to be equipped with a fully fledged API for easily creating open source bus protocols in Chisel based designs

Motivation

There are fairly limited resources available for the Chisel developers to use pre-built opensource bus protocols. Even if they are present, they are tightly integrated inside a complex project or outdated or not properly managed in a single place. This project aims to be a one-stop platform for all Chisel based bus protocols that are supported to work on the FPGAs as well as on the ASIC flow.

Getting Started

It is highy recommended to follow the docs for installation guide and getting started. The documentation is up and running here: caravan.readthedocs.io

Current Status

A standard Wishbone Classic READ/WRITE is supported in Point-Point interconnection right now. More verification is needed to check the correct functionality of the IP according to the Wisbone B4 Specification.

As a quick start, you can use the wishbone host and slave IP in the following manner inside any other parent Module with one restriction that the parent module must be passed an implicit WishboneConfig which paramterizes the host as well as the slave:

class ParentModule(implicit val config: WishboneConfig) extends Module {
  val io = IO(new Bundle{})
  val wbHost = Module(new WishboneHost())
  val wbSlave = Module(new WishboneDevice())
  // Single Point-to-Point interconnect
  wbHost.io.wbMasterTransmitter <> wbSlave.io.wbMasterReceiver
  wbSlave.io.wbSlaveTransmitter <> wbHost.io.wbSlaveReceiver
}

Here is the waveform view of writing a data to a synchronous memory and then reading from the same address:

wb_read_write

To reproduce the above waveform in a VCD format follow the caravan developer's guide

ToDo

  1. Test the standard READ/WRITE protocol from B4 Wishbone specification.
  2. Create a 1:N switch to enable multiple peripherals to be connected with the bus.

Get Involved

We would love to have you join the community and ask/engage/solve problems related to the project here: https://gitter.im/merl-caravan/community

Contribution

This platform can only be built by your efforts. Open issues and send PRs so that they can be merged and make Caravan awesome!