This repository has been archived by the owner on Jan 13, 2020. It is now read-only.
-
Notifications
You must be signed in to change notification settings - Fork 473
Home
Stefan Dambeck edited this page Jan 28, 2018
·
71 revisions
- Setting up your router for port forwarding
- Customizing OpenWebRX for your station
- Running OpenWebRX on system startup
- Setting up multiple receivers on the same machine
- Additional features for the web interface
- Setting up OpenWebRX on a Raspberry Pi 2
- Optimizing OpenWebRX for speed
- Calibrating waterfall display levels
- Setup OpenWebRX for HTTPS (via Nginx as reverse proxy)
- Upgrading OpenWebRX to a newer version
- Correcting the frequency offset
- Running OpenWebRX on the BeagleBone
- Running OpenWebRX on the Odroid C2
- Replay previously recorded IQ clip with OpenWebRX
- Common problems and their solutions
- My receiver is not listed on sdr.hu
- Help! I'm getting audio underruns or overruns!
- I'm getting a "short write" error
-
Using SoapySDR via rx_tools with OpenWebRX
(this supports many hardware including HackRF, SDRplay, UHD, Airspy, Red Pitaya, etc.) - Using RTLSDR in direct sampling mode with OpenWebRX
- Using RTLSDR on HF with an upconverter
- Using OpenWebRX with an AirSpy
- Using OpenWebRX with an AirSpyHF
- Using OpenWebRX with AFEDRI SDR
- Using OpenWebRX with HPSDR
- Using OpenWebRX with FiFi SDR
- Using OpenWebRX with SDRplay
-
Using GrOsmoSDR as signal source
(this supports many hardware including USRP, FunCube, SDR-IQ, etc.) - Using OpenWebRX with the audio card as a VLF receiver
- Adding support for new receiver hardware
- Using OpenWebRX with Perseus
- Using OpenWebRX with S9-C
- Using OpenWebRX with Elad receivers